NF T35-505-3-1997 Preparation of steel substrates before application of paints and related products Specifications for metallic blast-cleaning abrasives Part 3 high-carbon cast-st.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

JUS K G3 070-1990 Slotted knurled round vvashers《开缝滚边圆垫圈》.pdf

JUS K G3 071-1990 Bali vvashers and cone sockets《Bali垫圈及圆锥叉口》.pdf

JUS K G3 310-1984 Key type thne-jaw drill chucks Technical reguirements《键型式三爪钻头夹盘 技术要求》.pdf

JUS K G3 315-1984 Key type three-jaw drill chuks form and dimensiont《Key 型三定位销钻头卡，形式及尺寸》.pdf

JUS K G3 316-1984 Key type tree-jaw drill chucks key and tooth system《Key型三定位销钻头卡 key及齿系统》.pdf

JUS K G3 340-1980 Press fit jig bushes headless《压入式配合衬套，无头》.pdf

JUS K G3 341-1980 Press flt bushes headed《压入式配合衬套，有头的》.pdf

JUS K G3 342-1980 Renev able jig bushes and accessories《可更换夹具衬套及附件》.pdf

JUS K G5 011-1980 l Vrench and socket openings Tolerances for general use《扳手及叉口开口 普通公差》.pdf