NF T47-002-1992 Conveyor belts Sampling 《传送带 取样》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

KS M ISO 11909-2012 Binders for paints and varnishes－Polyisocyanate resins－ General methods of test《涂料和清漆用粘接剂 聚异氰酸树脂 一般检验法》.pdf

KS M ISO 11922-1-2003 Thermoplastics pipes for the conveyance of fluids－Dimensions and tolerances－Part 1：Metric series《流体传输用热塑管 尺寸和公差 第1部分 米制系列》.pdf

KS M ISO 11997-1-2011 Paints and varnishes－Determination of resistance to cyclic corrosion conditions－Part 1：Wet(salt fog) dry humidity《涂料和清漆 耐周期性腐蚀的测定 第1部分 湿(盐雾) 干燥 湿度影响试验》.pdf

KS M ISO 11998-2008 Paints and varnishes－Determination of wet-scrub resistance and cleanability of coatings《涂料和清漆 涂层耐湿式洗涤和可清洗性测定》.pdf

KS M ISO 12058-1-2006 Plastics Determination of viscosity using a falling-ball viscometer－Part 1：Inclined-tube method《塑料 使用落球式粘度计测定粘度 第1部分 斜管法》.pdf

KS M ISO 1209-1-2012 Rigid cellular plastics－Determination of flexural properties－Part 1：Basic bending test《硬质泡沫塑料 挠曲试验 第1部分 挠曲性的测定》.pdf

KS M ISO 1209-2-2012 Rigid cellular plastics－Determination of flexural properties－Part 2：Determination of flexural strength and apparent flexural modulus of elasticity《硬质泡沫塑料 挠曲试验 .pdf

KS M ISO 12137-2012 Paints and varnishes－Determination of mar resistance《涂料和清漆 耐损性测定》.pdf

KS M ISO 123-2007 Rubber latex－Sampling《橡胶胶乳 取样》.pdf