1、_ SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising there
2、from, is the sole responsibility of the user.” SAE reviews each technical report at least every five years at which time it may be revised, reaffirmed, stabilized, or cancelled. SAE invites your written comments and suggestions. Copyright 2013 SAE International All rights reserved. No part of this p
3、ublication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-497
4、0 (outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org SAE values your input. To provide feedback on this Technical Report, please visit http:/www.sae.org/technical/standards/J2059_201302 SURFACE VEHICLE RECOMMENDED PRACTICE J2059 FEB2013 Issued 1992-08 Re
5、affirmed 2013-02 Superseding J2059 AUG1992 All-Wheel-Drive Drivetrain Schematic Symbol Standards RATIONALE J2059 meets the requirement of its original intended purpose. As such, it provides a method of describing Driveline system concepts in schematic form. As a compilation of symbols, it provides a
6、n introduction to the components normally associated with All Wheel Drive technology. SAE J2059 Reaffirmed FEB2013 Page 2 of 9 SAE J2059 Reaffirmed FEB2013 Page 3 of 9 SAE J2059 Reaffirmed FEB2013 Page 4 of 9 SAE J2059 Reaffirmed FEB2013 Page 5 of 9 SAE J2059 Reaffirmed FEB2013 Page 6 of 9 SAE J2059 Reaffirmed FEB2013 Page 7 of 9 SAE J2059 Reaffirmed FEB2013 Page 8 of 9 SAE J2059 Reaffirmed FEB2013 Page 9 of 9 REAFFIRMED BY THE SAE ALL WHEEL DRIVETRAIN STANDARDS COMMITTEE
