1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA
2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any
3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ISBN 978-0-626-19527-4 SANS 60884-2-2:2007Edition 2IEC 60884-2-2:2006Edition 2 SOUTH AFRICAN NATIONAL STANDARD Plugs and socket-outlets for household and
4、 similar purposes Part 2-2: Particular requirements for socket-outlets for appliances This national standard is the identical implementation of IEC 60884-2-2:2006 and is adopted with the permission of the International Electrotechnical Commission. WARNING Can only be used in conjunction with SANS 60
5、884-1. Published by Standards South Africa 1 dr lategan road groenkloof private bag x191 pretoria 0001 tel: 012 428 7911 fax: 012 344 1568 international code + 27 12 www.stansa.co.za Standards South Africa SANS 60884-2-2:2007 Edition 2 IEC 60884-2-2:2006 Edition 2 Table of changes Change No. Date Sc
6、ope National foreword This South African standard was approved by National Committee StanSA SC 67C, Electricity distribution systems and components Electrical accessories, in accordance with procedures of Standards South Africa, in compliance with annex 3 of the WTO/TBT agreement. This SANS document
7、 was published in May 2007. This SANS document supersedes SABS IEC 60884-2-2:1989 (first edition). Plugs and socket-outlets for household and similar purposes Part 2-2: Particular requirements for socket-outlets for appliances For price, see current catalogue IEC 2006 Copyright - all rights reserved
8、 No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. International Electrotechnical Commission, 3, rue de Varemb, PO Box 131, CH-1211 Geneva 20, Switze
9、rlandTelephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmailiec.ch Web: www.iec.ch INTERNATIONAL STANDARD IEC60884-2-2Second edition2006-10L Commission Electrotechnique InternationaleInternational Electrotechnical Commission PRICE CODE SANS 60884-2-2:2007This s tandard may only be used
10、and printed by approved subscription and freemailing clients of the SABS .60884-2-2 IEC:2006 3 CONTENTS FOREWORD.5 1 Scope.9 2 Normative references .9 3 Definitions 11 4 General requirements.11 5 General notes on tests .11 6 Ratings.11 7 Classification13 8 Marking 13 9 Checking of dimensions13 10 Pr
11、otection against electric shock 13 11 Provision for earthing .13 12 Terminals and terminations 13 13 Construction of fixed socket-outlets 17 14 Construction of plugs and portable socket-outlets.17 15 Interlocked socket-outlets.17 16 Resistance to ageing, protection provided by enclosures, and resist
12、ance to humidity .17 17 Insulation resistance and electric strength 17 18 Operation of earthing contacts17 19 Temperature rise 17 20 Breaking capacity.17 21 Normal operation17 22 Force necessary to withdraw the plug.17 23 Flexible cables and cords and their connection.19 24 Mechanical strength .19 2
13、5 Resistance to heat21 26 Screws, current-carrying parts and connections21 27 Creepage distances, clearances and distances through sealing compound 21 28 Resistance of insulating material to abnormal heat, to fire and to tracking 21 29 Resistance to rusting21 30 Additional tests on pins provided wit
14、h insulating sleeves 21 Table 101 Forces to be applied to tabs 15 Table 102 Relationship between tab size and rated current .15 Table 103 Relationship between height of fall of pendulum and spring hammer energy 19 SANS 60884-2-2:2007This s tandard may only be used and printed by approved subscriptio
15、n and freemailing clients of the SABS .60884-2-2 IEC:2006 5 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ PLUGS AND SOCKET-OUTLETS FOR HOUSEHOLD AND SIMILAR PURPOSES Part 2-2: Particular requirements for socket-outlets for appliances FOREWORD 1) The International Electrotechnical Commission (IEC) is a
16、 worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to ot
17、her activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the
18、 subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with condition
19、s determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National
20、 Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in
21、 which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Pub
22、lication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensur
23、e that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of an
24、y nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the refe
25、renced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. Inter
26、national Standard IEC 60884-2-2 has been prepared by subcommittee 23B: Plugs, socket-outlets and switches, of IEC technical committee 23: Electrical accessories. This second edition of IEC 60884-2-2 cancels and replaces the first edition published in 1989, and constitutes a technical revision. The m
27、ain changes from the previous edition are as follows: alignment to IEC 60884-1 third edition; modification of Clause 12 to clarify the use of flat quick-connect terminations and for looping in; modification of Clause 24 to refer to IEC 60068-2-75 for details of the test apparatus. SANS 60884-2-2:200
28、7This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .60884-2-2 IEC:2006 7 The text of this standard is based on the following documents: FDIS Report on voting 23B/830/FDIS 23B/847/RVDFull information on the voting for the approval of this standar
29、d can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. This Part 2-2 is intended to be used in conjunction with IEC 60884-1. It was established on the basis of the third edition (2002) of that standard
30、. This Part 2-2 supplements or modifies the corresponding clauses in IEC 60884-1, so as to convert that publication into the IEC standard: Particular requirements for socket-outlets for appliances. When a particular subclause of Part 1 is mentioned in this Part 2-2, that subclause applies as far as
31、reasonable. Where this standard states “addition”, “modification” or “replacement”, the relevant text of Part 1 is to be adapted accordingly. In this standard the following print types are used: requirements proper: in roman type; test specification: in italic type; explanatory notes: in small roman
32、 type. Subclauses and tables which are additional to those in Part 1 are numbered starting from 101. When clauses of Part 1 are declared as applicable, they apply only where they contain requirements concerning socket-outlets for appliances. A list of all parts of the IEC 60884 series, under the gen
33、eral title Plugs and socket-outlets for household and similar purposes, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data rel
34、ated to the specific publication. At this date, the publication will be reconfirmed; withdrawn; replaced by a revised edition, or amended. SANS 60884-2-2:2007This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .60884-2-2 IEC:2006 9 PLUGS AND SOCKE
35、T-OUTLETS FOR HOUSEHOLD AND SIMILAR PURPOSES Part 2-2: Particular requirements for socket-outlets for appliances 1 Scope This clause of Part 1 is applicable except as follows. Replacement of the first paragraph: This part of IEC 60884 applies to socket-outlets for a.c. only, with or without earthing
36、 contact, with a rated voltage not exceeding 250 V and a rated current not exceeding 16 A, which are integrated or intended to be incorporated in or fixed to appliances, hereafter referred to as socket-outlets for appliances. Addition after the fourth paragraph: Socket-outlets for appliances are pro
37、vided with means for fixing into appropriate mounting boxes, if intended also for use in fixed installations. Socket-outlets for appliances are intended to be used in stationary equipment and appliances such as office machines, computers, audio-visual and video equipment, range hoods, ranges, etc. I
38、f necessary, the use of socket-outlets for appliances is indicated in the standards for the appropriate equipment or appliance. The temperature around socket-outlets for appliances must not exceed 35 C. 2 Normative references This clause of Part 1 is applicable except as follows. Addition: IEC 60068
39、-2-75, Environmental testing Part 2-75: Tests Test Eh: Hammer tests IEC 61210, Connecting devices Flat quick-connect terminations for electrical copper conductors Safety requirements SANS 60884-2-2:2007This s tandard may only be used and printed by approved subscription and freemailing clients of th
40、e SABS .60884-2-2 IEC:2006 11 3 Definitions This clause of Part 1 is applicable except as follows. 3.6 Replacement: socket-outlet for appliances socket-outlet integral with, or intended to be incorporated in, or fixed to, an electrical appliance Addition: 3.101 flat quick-connect termination electri
41、cal connection consisting of a male tab and female connector which can be readily inserted and withdrawn without the use of a tool NOTE Other terms, such as: “snap-on connector“, “flat push-on connector“ are sometimes used. 3.102 female connector portion of a flat quick-connect termination which is
42、pushed on to the male tab 3.103 male tab portion of a flat quick-connect termination which receives the female connector 4 General requirements This clause of Part 1 is applicable. 5 General notes on tests This clause of Part 1 is applicable except as follows. Addition: 5.101 If socket-outlets for a
43、ppliances are provided with male tabs of flat quick-connect terminations, new female connectors shall be used for each test according to Clauses 19, 20 and 21. These female connectors shall be made from unplated copper alloy. 6 Ratings This clause of Part 1 is applicable except as follows. 6.1 Addit
44、ion: For socket-outlets for appliances, Table 1 applies up to and including a rated current of 16 A and up to and including a rated voltage of 250 V. SANS 60884-2-2:2007This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .60884-2-2 IEC:2006 13 7 C
45、lassification This clause of Part 1 is applicable. 8 Marking This clause of Part 1 is applicable. 9 Checking of dimensions This clause of Part 1 is applicable. 10 Protection against electric shock This clause of Part 1 is applicable. 11 Provision for earthing This clause of Part 1 is applicable. 12
46、Terminals and terminations This clause of Part 1 is applicable except as follows. 12.1.1 Addition after the first paragraph: Socket-outlets for appliances shall be provided with screw-type terminals, screwless terminals or male tabs of flat quick-connect terminations. Notes a and b of Table 3 are no
47、t applicable. Addition: 12.101 Flat quick-connect terminations Male tabs and female connectors to be used for test purposes shall comply with IEC 61210. 12.101.1 Constructional requirements 12.101.1.1 Male tabs shall be of nominal sizes: 2,8 mm 0,8 mm or 4,8 mm 0,8 mm or 6,3 mm 0,8 mm, as detailed i
48、n IEC 61210. Compliance is checked by measuring three specimens, all of which shall comply with the dimensional requirements of IEC 61210. SANS 60884-2-2:2007This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .60884-2-2 IEC:2006 15 Round dimple i
49、ndents, rectangular dimple indents, hole indents or provisions for non-reversible flat quick-connect terminations, if any, shall also comply with IEC 61210. 12.101.1.2 Male tabs shall be made from copper or copper alloy (bare or tin plated). Materials or coatings other than those specified may be used, provided that their electrical and mechanical characteristics are no less reliable, particularly with regard to resistance to corrosion, stabi
