SIS 62 37 03-1965 《对本债券的持有人》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SAE AS 4296-2013 Drawing Interpretation and Standard Machining Practices Couplings Fittings and Hose Ends Fluid Systems《接头 配件和软管两端以及流体系统的土质解释和标准加工做法》.pdf

SAE AS 4299A-1996 Rings Retaining - Spiral Wound Uniform Section Corrosion and Heat Resistant UNS S66286《UNS S66286 FSC 5365 等截面耐腐蚀耐热螺旋状固定环》.pdf

SAE AS 430-1960 Powerplant Fire Detection Instruments - Thermal and Flame Contact Types (Turbine).pdf

SAE AS 4300C-2014 FITTING ASSEMBLY CAP FLARELESS PROTECTIVE CLOSURE LOW PRESSURE.pdf

SAE AS 4301C-2015 FITTING ADAPTER CONICAL END TO FLARED TUBE REDUCER FOR SEAL RING.pdf

SAE AS 4302-1993 Tee Assembly Flared Tube Retained Nut on Run for Seal Ring《密封圈直通固定螺母扩口三通总成》.pdf

SAE AS 4303-1993 ELBOW ASSEMBLY 90 FLARED TUBE TO ADJUSTABLE END FOR SEAL RING《密封环使用的扩口管至可调端90度弯管总成》.pdf

SAE AS 4304-1993 TEE ASSEMBLY FLARED TUBE RETAINED NUT ON SIDE FOR SEAL RING《密封圈侧面固定螺母扩口三通总成》.pdf

SAE AS 4305-1993 TEE ASSEMBLY FLARED TUBE ADJUSTABLE END ON RUN FOR SEAL RING《密封圈的直通可调整端扩口三通总成》.pdf