SIS MNC 916-1992 Structural steels for cold rolled sheet Summary《制成冷轧薄板的结构钢 概述》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D4161-2001(2005) Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals《使用挠性弹性体密封件的 玻璃钢 (玻璃纤维增强热固树脂).pdf

ASTM D4161-2001(2010) Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals《使用挠性弹性体密封件的玻璃钢(玻璃 - 纤维 - 增强热.pdf

ASTM D4161-2014 Standard Specification for &ldquo Fiberglass&rdquo &40 Glass-Fiber-Reinforced Thermosetting-Resin&41 Pipe Joints Using Flexible Elastomeric Seals《使用挠性弹性体密封件的玻璃钢(玻璃纤.pdf

ASTM D4164-2003 Standard Test Method for Mechanically Tapped Packing Density of Formed Catalyst and Catalyst Carriers《成型催化剂和催化剂载体机械振实填充密度的标准试验方法》.pdf

ASTM D4164-2003(2008) Standard Test Method for Mechanically Tapped Packing Density of Formed Catalyst and Catalyst Carriers《成型催化剂和催化剂载体机械振实填充密度的标准试验方法》.pdf

ASTM D4164-2013 Standard Test Method for Mechanically Tapped Packing Density of Formed Catalyst and Catalyst Carriers《成型催化剂和催化剂载体机械振实填充密度的标准试验方法》.pdf

ASTM D4164-2013(2018) Standard Test Method for Mechanically Tapped Packing Density of Formed Catalyst and Catalyst Carriers.pdf

ASTM D4165-2006 Standard Test Method for Cyanogen Chloride in Water《水中氯化氰含量的标准试验方法》.pdf

ASTM D4165-2006(2012) Standard Test Method for Cyanogen Chloride in Water&thinsp 《水中氯化氰含量的标准试验方法》.pdf