SIS SEN 24 12 77-1973 Line material Line accessories Survey《线材 输电线路附件 测量》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SFS 3270 E-1975 《压力容器检查 构造检查》.pdf

SFS 3270-1975 PAINEASTIAN TARKASTUS RAKENNETARKASTUS《压力容器检查 结构检查》.pdf

SFS 3271-1975 《金属管的平滑测试》.pdf

SFS 3272-1975 METALLIPUTKIEN KARTIOLAAJENNUSKOE《金属管的圆形膨胀测试》.pdf

SFS 3273 E-1975 In the event of any differences in interpretation of this standard the Finnish version shall take precedence over this translation 《压力容器设计 管路 基本要求》.pdf

SFS 3273-1976 PAINEASTIAIN MITOITUS PUTKISTOT MITOITUKSEN PERUSTEET《压力容器的连系尺寸 管道系统 连系尺寸的基础》.pdf

SFS 3274 E-1975 In the event of any differences in interpretation of this standard the Finnish version shall take precedence over this translation 《压力容器设计 需要承受内压的管路壳体》.pdf

SFS 3274-1976 PAINEASTIAIN MITOITUS PUTKISTOT SUORA PUTKI SIS INEN PAINE《压力容器的连系尺寸 管道系统 直管 内压》.pdf

SFS 3275 E-1975 In the event of any differences in interpretation of this standard the Finnish version shall taka precedence over this translation 《压力容器设计 需要承受内压的管路弯头》.pdf