SS 545-2009 Specification for hotel security《宾馆安全性规范》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D7291 D7291M-2007 Standard Test Method for Through-Thickness Flatwise Tensile Strength and Elastic Modulus of a Fiber-Reinforced Polymer Matrix Composite Material《纤维增强聚合物基体复.pdf

ASTM D7291 D7291M-2015 red 8507 Standard Test Method for Through-Thickness &x201c Flatwise&x201d Tensile Strength and Elastic Modulus of a Fiber-Reinforced Polymer Matrix Composite.pdf

ASTM D7292-2006 Standard Specification for Extruded Compression-Molded and Injection-Molded Basic Shapes of Polyamide-Imide (PAI)《聚酰胺酰亚胺(PAI)挤压、压模和注模基本型材的标准规范》.pdf

ASTM D7292-2012 5804 Standard Specification for Extruded Compression-Molded and Injection-Molded Basic Shapes of Polyamide-Imide (PAI)《聚酰胺酰亚胺 (PAI) 制挤压成型 压模成型和注模成型的基本型材的标准规范》.pdf

ASTM D7292-2018 0000 Standard Specification for Extruded Compression-Molded and Injection-Molded Basic Shapes of Polyamide-Imide (PAI).pdf

ASTM D7293-2006 Standard Test Method for Extruded and Compression-Molded Shapes Made from Polyetherimide (PEI)《由聚醚酰亚胺(PEI)制造的挤压和压缩铸模型材的标准试验方法》.pdf

ASTM D7293-2012 8125 Standard Specification for Extruded and Compression-Molded Shapes Made from Polyetherimide (PEI)《聚醚酰亚胺 (PEI) 制挤压成型和压模成型的型材的标准规范》.pdf

ASTM D7294-2006 Standard Guide for Collecting Treatment Process Design Data at a Contaminated Site-A Site Contaminated With Chemicals of Interest《污染地点收集处理工艺流程设计数据标准指南 侧重化学污染地点》.pdf

ASTM D7294-2013 red 0625 Standard Guide for Collecting Treatment Process Design Data at a Contaminated SiteA Site Contaminated With Chemicals of Interest《收集被污染场所处理过程设计数据的标准指南 侧重化学污.pdf