SS 78 Pt B2-1992 Testing Concrete Part B2 Recommendations For Surface Hardness Testing By Rebound Hammer《混凝土测试 第B2部分：用回弹仪测试表明硬度时的建议》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

NF T54-101-1974 Plastic sheet Presentation and dimensions Methods of control 《塑料薄板 表示法和尺寸 控制方法》.pdf

NF T54-103-1996 Plastics Poly(methyl methacrylate) double- And triple-skin sheets Test methods 《塑料 聚甲基丙烯酸甲酯双合板和三合板 试验方法》.pdf

NF T54-104-1970 Plastics Sheets Estimate of flexibility Suspended loop method 《塑料制品 薄板 柔性评估 吊环法》.pdf

NF T54-106-1980 Plastics Sheets Evaluation of the tendency to cohere Peeling method 《塑料制品 薄板 粘结倾向的评价 剥离法》.pdf

NF T54-110-1971 Plastics Thin sheets Determination of pliability limit temperature (looped test piece impact test) 《塑料制品 薄板 柔韧性极限温度测定(扣环试件的冲击试验)》.pdf

NF T54-115-1973 Plastic sheets Determination of dimensional variations after heating Immersion method 《塑料薄板 受热后尺寸变化的测定 浸泡法》.pdf

NF T54-116-1973 Plastic Sheets Determination of resistance to perforation Perforametre method 《塑料薄板 抗穿孔强度的测定 穿孔法》.pdf

NF T54-120-1976 Plastics Sheets Assessment of suitability for thermal welding (hot bar method ) 《塑料 薄板 热焊接适应性评估（热棒法）》.pdf

NF T54-121-1976 Plastics Thin polyethylene sheets Resistance to splitting of welds under tensile stress in the presence of chemical agents 《塑料制品 聚乙烯薄板 受应力作用和存在化学试剂情况下测定焊缝的抗裂强度》.pdf