TIS 1324-1996 Non destructive testing penetrant testing《无损检测 渗透检测》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

KS M ISO 1063-2006 Surface active agents-Determination of stability in hard water《表面活性剂 硬水中稳定性的测定》.pdf

KS M ISO 10638-2012 Rubber－Identification of antidegradants by gas chromatography mass spectrometry《橡胶 气相色谱法 根据质谱法确认抗氧化剂》.pdf

KS M ISO 10724-2-2010 Plastics－Injection moulding of test specimens of thermosetting powder moulding compounds(PMCs)－Part 2：Small plates《塑料 热固性粉末模塑复合物试样的注射模塑成型 第2部分 小板材》.pdf

KS M ISO 10890-2012 Paints and varnishes－Modelling of biocide release rate from antifouling paints by mass-balance calculation《涂料与清漆 根据质量计算以防污涂料制作防污剂排放速度模型》.pdf

KS M ISO 10933-2009 Polyethylene(PE) valves for gas distribution systems《气体分配系统用聚乙烯(PE)阀门》.pdf

KS M ISO 10964-2010 Adhesives－Determination of torque strength of anaerobic adhesives on threaded fasteners《粘合剂 螺纹紧固件上厌氧粘合剂的抗扭强度的测定》.pdf

KS M ISO 11003-2-2010 Adhesives－Determination of shear behaviour of structural adhesives－Part 2：Tensile test method using thick adherends.pdf

KS M ISO 1104-2006 Surface active agents－Technical sodium alkylarylsulphonates(excluding benzene derivatives)－Methods of analysis《表面活性剂 工业用烷芳基磺酸钠(苯衍生物除外) 分析方法》.pdf

KS M ISO 11089-2012 Rubber raw synthetic－Determination of antidegradants by high-performance liquid chromatography《合成生胶 用高效液相色谱法测定抗降解剂》.pdf