UNE 38-010-1991 《铝质和铝合金的阳极氧化 铝材氧化层的一般说明》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM F3278-2017 Standard Performance Specification for Hand-Held Metal Detectors Used in Safety and Security《安全和安保用手持式金属探测器的标准性能规格》.pdf

ASTM F3284-2018 Standard Guide for Recording and Reporting of Injuries and Illnesses for the Maritime Industry《海运业伤病记录和报告标准指南》.pdf

ASTM F3285-2018 Standard Guide for Installation and Application of Type C Portable Tanks for Marine LNG Service.pdf

ASTM F3286-2017 Standard Guide for Cybersecurity and Cyberattack Mitigation《网络安全和网络攻击缓解的标准指南》.pdf

ASTM F3287-2017 Standard Test Method for Nondestructive Detection of Leaks in Packages by Mass Extraction Method《用质量萃取法进行包裹泄漏物无损检测的标准试验方法》.pdf

ASTM F3287-2017e1 Standard Test Method for Nondestructive Detection of Leaks in Packages by Mass Extraction Method《质量抽取法无损检测包装泄漏的标准试验方法》.pdf

ASTM F3290-2017 Standard Guide for Handling and Application of a Membrane Switch or Printed Electronic Device to its Final Support Structure《薄膜开关或印刷电子设备对最终支撑结构的处理和应用的标准指南》.pdf

ASTM F3291-2017 Standard Test Method for Measuring the Force-Resistance of a Membrane Force Sensor《测量薄膜力开关的力位移的标准试验方法》.pdf

ASTM F3293-2018 Standard Guide for Application of Test Soils for the Validation of Cleaning Methods for Reusable Medical Devices.pdf