DB64 T 697-2011 《回弹法检测泵送混凝土抗压强度技术规程》.pdf

相关资源

JIS A1161-1994 多孔混凝土的体积比重、含水率、吸水率及抗压强度的试验方法.pdf

JIS A1142-2007 用灰浆抗压强度测定细集料中有机杂质含量的试验方法.pdf

JIS M8718-2000 铁矿石颗粒抗压强度测定.pdf

HB 5367.1-1986 碳石墨密封材料抗压强度试验方法.pdf

JB T 10985-2010 超硬磨料 抗压强度测定方法.pdf

JC T 1098-2009 砌墙砖抗压强度试验标准用净浆.pdf

JG T 3023-1995 挤压成型空心板用混凝土抗压强度试验方法.pdf

JGJ T 208-2010 后锚固法检测混凝土抗压强度 技术规程.pdf

JGJ T 234-2011 择压法检测砌筑砂浆抗压强度 技术规程.pdf

MT T 593.4-1996 人工冻土物理力学性能试验 第4部分 人工冻土单轴抗压强度试验方法.pdf

猜你喜欢

FORD WSK-M4D718-A4-2010 POLYCARBONATE + POLYBUTYLENE THEREPHTALATE (PC+PBT) BLEND FILM TRANSLUCENT TO BE USED WITH FORD WSS-M99P1111-A 《聚碳酸酯+聚对苯二甲酸丁二醇酯混合物(PC+PBT)混合物半透明薄膜 与标准FOR.pdf

FORD WSK-M4D719-A-2006 POLYAMIDE (PA) 66 38% GLASS FIBER MINERAL REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A (Use WSK-M4D823-A)《38%玻璃纤维 矿物增强的聚酰胺66成型料 与标准FORD.pdf

FORD WSK-M4D720-A-2005 THERMOPLASTIC POLYETHER ESTER ELASTOMER (TEEE) 50 DUROMETER D HARDNESS MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《硬度为50 D的热塑性聚醚酯弹性体(TEEE)成型料 与标.pdf

FORD WSK-M4D721-A-2013 POLYETHYLENE (PE) MOLDING COMPOUND HIGH DENSITY MEDIUM MELT FLOW RATE TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSK-M4D722-A-2008 ABS 16% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《丙烯腈-丁二烯-苯乙烯 16%玻璃纤维增强模塑料(和FORD WSS-M99P1111-A一起使用)(使用 FORD ESB-M4D483-.pdf

FORD WSK-M4D722-A2-2008 ABS 7 % GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《ABS 7%强化玻璃纤维模压塑料(与FORD WSS-M99P1111-A一起使用) (使用 FORD ESB-M4D483-A1 FOR.pdf

FORD WSK-M4D724-A1-2013 STYRENE MALEIC ANHYDRIDE (SMA) COPOLYMER RUBBER MODIFIED 20% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSK-M4D724-A2-2013 STYRENE MALEIC ANHYDRIDE (SMA) COPOLYMER RUBBER MODIFIED 20% GLASS FIBER 10% ACRYLIC REGRIND REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-.pdf

FORD WSK-M4D725-A-2012 POLYBUTYLENE TEREPHTHALATE (PBT) 30 % GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf