1、 IEC 61730-2 Edition 2.0 2016-08 INTERNATIONAL STANDARD NORME INTERNATIONALE Photovoltaic (PV) module safety qualification Part 2: Requirements for testing Qualification pour la sret de fonctionnement des modules photovoltaques (PV) Partie 2: Exigences pour les essais IEC 61730-2:2016-08(en-fr) colo
2、ur inside THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2016 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without pe
3、rmission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee
4、for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de lIEC ou
5、du Comit national de lIEC du pays du demandeur. Si vous avez des questions sur le copyright de lIEC ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de lIEC de votre pays de rsidence. IEC Central Office Tel.: +4
6、1 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and relate
7、d technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application
8、for consulting the entire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publicatio
9、ns by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released
10、. Available online and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing 20 000 terms and definitions in English and French, with equivalent terms in 15 additional languages. Also known as the Internatio
11、nal Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary 65 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC
12、TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de lIEC La Commission Electrotechnique Internationale (IEC) est la premire o
13、rganisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications IEC Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possdez ldition la plus
14、rcente, un corrigendum ou amendement peut avoir t publi. Catalogue IEC - webstore.iec.ch/catalogue Application autonome pour consulter tous les renseignements bibliographiques sur les Normes internationales, Spcifications techniques, Rapports techniques et autres documents de lIEC. Disponible pour P
15、C, Mac OS, tablettes Android et iPad. Recherche de publications IEC - www.iec.ch/searchpub La recherche avance permet de trouver des publications IEC en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplac
16、es ou retires. IEC Just Published - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications IEC. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne
17、 de termes lectroniques et lectriques. Il contient 20 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans 15 langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (IEV) en ligne. Glossaire IEC - std.iec.ch/glossary 65 000 entres termin
18、ologiques lectrotechniques, en anglais et en franais, extraites des articles Termes et Dfinitions des publications IEC parues depuis 2002. Plus certaines entres antrieures extraites des publications des CE 37, 77, 86 et CISPR de lIEC. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner
19、des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 61730-2 Edition 2.0 2016-08 INTERNATIONAL STANDARD NORME INTERNATIONALE Photovoltaic (PV) module safety qualification Part 2: Requirements for testing Qualification pour la sret de fonctionnement des
20、modules photovoltaques (PV) Partie 2: Exigences pour les essais INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE ICS 27.160 ISBN 978-2-8322-3575-1 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique
21、Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. colour inside 2 IEC 61730-2:2016 IEC 2016 CONTENTS FOREWORD. 6 1 Scope 8 2 Normative references 8 3 Te
22、rms and definitions 10 4 Test categories 10 4.1 General . 10 4.2 Environmental stress tests 10 4.3 General inspection 10 4.4 Electrical shock hazard tests . 11 4.5 Fire hazard tests . 11 4.6 Mechanical stress tests . 11 5 Classes and their necessary test procedures 12 6 Sampling . 14 7 Test report 1
23、4 8 Testing 15 9 Pass criteria 17 10 Test procedures 17 10.1 General . 17 10.2 Visual inspection MST 01 17 10.2.1 Purpose . 17 10.2.2 Procedure 17 10.2.3 Pass criteria . 17 10.3 Performance at STC MST 02 . 19 10.3.1 Purpose . 19 10.3.2 Procedure 19 10.3.3 Pass criteria . 19 10.4 Maximum power determ
24、ination MST 03 . 19 10.4.1 Purpose . 19 10.4.2 Procedure 19 10.4.3 Pass criteria . 19 10.5 Insulation thickness test MST 04 . 19 10.5.1 Purpose . 19 10.5.2 Procedure 20 10.5.3 Pass criteria . 20 10.6 Durability of markings MST 05 . 20 10.7 Sharp edge test MST 06 20 10.8 Bypass diode functionality te
25、st MST 07 21 10.9 Accessibility test MST 11 . 21 10.9.1 Purpose . 21 10.9.2 Apparatus 21 10.9.3 Procedure 21 10.9.4 Final measurements . 21 10.9.5 Pass criteria . 21 10.10 Cut susceptibility test MST 12 . 21 10.10.1 Purpose . 21 10.10.2 Apparatus 22 IEC 61730-2:2016 IEC 2016 3 10.10.3 Procedure 22 1
26、0.10.4 Final measurements . 22 10.10.5 Pass criteria . 22 10.11 Continuity test of equipotential bonding MST 13 . 23 10.11.1 Purpose . 23 10.11.2 Apparatus 23 10.11.3 Procedure 24 10.11.4 Final measurements . 24 10.11.5 Pass criteria . 24 10.12 Impulse voltage test MST 14 . 24 10.12.1 Purpose . 24 1
27、0.12.2 Apparatus 24 10.12.3 Procedure 25 10.12.4 Final measurement 26 10.12.5 Pass criteria . 26 10.13 Insulation test MST 16 . 26 10.13.1 Purpose . 26 10.13.2 Procedure 26 10.13.3 Pass criteria . 26 10.14 Wet leakage current test MST 17 . 26 10.15 Temperature test MST 21 27 10.15.1 Purpose . 27 10.
28、15.2 Outdoor method . 27 10.15.3 Solar simulator method 28 10.15.4 Pass criteria . 30 10.16 Hot-spot endurance test MST 22 . 30 10.17 Fire test MST 23 . 30 10.17.1 Purpose . 30 10.18 Ignitability test MST 24 31 10.18.1 Purpose . 31 10.18.2 Apparatus 31 10.18.3 Test specimen . 32 10.18.4 Conditioning
29、 32 10.18.5 Procedure 32 10.18.6 Duration of test 33 10.18.7 Observations . 33 10.18.8 Pass criteria . 33 10.19 Bypass diode thermal test MST 25 . 34 10.20 Reverse current overload test MST 26 . 34 10.20.1 Purpose . 34 10.20.2 Procedure 34 10.20.3 Pass criteria . 34 10.21 Module breakage test MST 32
30、 . 35 10.21.1 Purpose . 35 10.21.2 Apparatus 35 10.21.3 Procedure 35 10.21.4 Pass criteria . 35 10.22 Screw connections test MST 33 . 38 10.22.1 Test for general screw connections MST 33a 38 4 IEC 61730-2:2016 IEC 2016 10.22.2 Test for locking screws MST 33b 40 10.23 Static mechanical load test MST
31、34 . 40 10.24 Peel test MST 35 40 10.24.1 Purpose . 40 10.24.2 Sample requirements . 40 10.24.3 Apparatus 41 10.24.4 Procedure 41 10.24.5 Pass criteria . 44 10.25 Lap shear strength test MST 36 . 44 10.25.1 Purpose . 44 10.25.2 Test samples . 44 10.25.3 Apparatus 45 10.25.4 Procedure 45 10.25.5 Pass
32、 criteria . 46 10.26 Materials creep test MST 37 47 10.26.1 Purpose . 47 10.26.2 Apparatus 47 10.26.3 Procedure 47 10.26.4 Final measurements . 47 10.26.5 Pass criteria . 47 10.27 Robustness of terminations test MST 42 47 10.28 Thermal cycling test MST 51 . 48 10.29 Humidity freeze test MST 52 48 10
33、.30 Damp heat test MST 53 . 48 10.31 UV test MST 54 . 48 10.32 Cold conditioning MST 55 48 10.32.1 Purpose . 48 10.32.2 Apparatus 48 10.32.3 Procedure 48 10.32.4 Pass criteria . 49 10.33 Dry heat conditioning MST 56 49 10.33.1 Purpose . 49 10.33.2 Apparatus 49 10.33.3 Procedure 49 10.33.4 Pass crite
34、ria . 49 Annex A (informative) Recommendations for testing of PV modules from production . 50 A.1 General . 50 A.2 Module output power . 50 A.3 Wet insulation test . 50 A.4 Visual inspection . 51 A.5 Bypass diodes . 51 A.6 Continuity test of equipotential bonding . 51 Annex B (informative) Fire test
35、s, spread-of-flame and burning-brand tests for PV modules . 52 B.1 General . 52 B.2 Fire test for PV modules based on ENV 1187 . 52 B.2.1 General . 52 B.2.2 External fire exposure to roofs 52 B.2.3 Classification according to ISO 13501-5 . 53 IEC 61730-2:2016 IEC 2016 5 B.3 Fire test for PV modules
36、based on ANSI/UL 1703 54 Figure 1 Test sequences 16 Figure 2 Assessment of bubbles in edge seals for cemented joints 18 Figure 3 Cut susceptibility test . 23 Figure 4 Waveform of the impulse voltage following IEC 60060-1 25 Figure 5 Impactor . 36 Figure 6 Impact test frame 1 37 Figure 7 Impact test
37、frame 2 38 Figure 8 Sample preparation of cemented joints 10 mm using a release sheet 41 Figure 9 PV module with positions for peel samples on frontsheet or backsheet 42 Figure 10 Typical peel-off measurement curves 43 Figure 11 Lap shear test sample for proving cemented joint 45 Figure 12 Lap-shear
38、 test flow . 46 Figure B.1 Example of test set-up for fire test . 53 Table 1 Environmental stress tests . 10 Table 2 General inspection test 10 Table 3 Electrical shock hazard tests . 11 Table 4 Fire hazard tests . 11 Table 5 Mechanical stress tests . 12 Table 6 Required tests, depending on the Clas
39、s . 13 Table 7 Torque tests on screws per IEC 60598-1:2014, Table 4.1 . 39 6 IEC 61730-2:2016 IEC 2016 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION Part 2: Requirements for testing FOREWORD 1) The International Electrotechnical Commission (IEC) is a world
40、wide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other ac
41、tivities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subje
42、ct dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions det
43、ermined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Comm
44、ittees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in whic
45、h they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publicat
46、ion and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not
47、 responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technic
48、al committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Pu
49、blications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. Internationa
