SN 253 130-1985 Refrigerating plantsErection Site requirements《SN-EN 标准 结构和设计准则》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

C0014700_402 Cylindrical Shaft End (for Assembling Coupling Pulley and Gear)《柱轴梢（用以承装联轴器，皮带轮与齿轮）》.pdf

C0014800_402 Taper Shaft End (for Assembling Coupling and Gear)《锥轴梢（用以承装联轴器与齿轮）》.pdf

C0014900_346 Fillet and Chamfer《棱角修圆》.pdf

C0015000_866 Medium Type Washers (Primarily for Hexagonal Bolts and Nuts)《精制垫圈（用于六角螺钉及螺帽）》.pdf

C0015100_459 Semi - Finished Washers (for Hexagonal Bolts and Nuts M1 -M20)《半光（辗光）制垫圈（用于六角螺钉及螺帽Ｍ１至Ｍ２０）》.pdf

C0015200_752 Semi - Finished Washers (for Bolts with Cylindrical Head and Nuts)《半光（辗光）制垫圈（用于柱头、半圆头螺钉及螺帽Ｍ１至Ｍ２０）》.pdf

C0015300_895 Coarse Type Washers (Primarity for Hexagonal Bolts and Nuts)《粗制垫圈（用于六角螺钉及螺帽）》.pdf

C0015400_809 Large Unfinished Washers (for Metric Bolts and Nuts M6 - M52)《粗制大垫圈（用于公制螺栓及螺帽Ｍ６至Ｍ５２）》.pdf

C0015500_431 Unfinished Square Washers (for Metric Bolts and Nuts)《粗制方垫圈（用于公制螺栓及螺帽）》.pdf