SN ISO 4032-1981 Hexagon nuts style 1Product grades A and B《带有细牙螺纹 75 100A的螺旋式熔断器，500V，125 200 A， 500V 量规》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD ESB-M2D246-A3-2013 THERMOPLASTIC POLYOLEFIN ELASTOMER PAINTABLE HIGH MODULUS TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD ESB-M2D246-A1).pdf

FORD ESB-M2D260-B-2009 POLYURETHANE FOAM SLAB - POLYESTER TYPE HEAT FORMABLE TO BE USED WITH FORD WSS-M99P1111-A 《可热成型的聚酯平板式聚氨酯泡沫 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESB-M2D263-A3-2009 POLYURETHANE MICROCELLULAR ELASTOMER - LIQUID REACTION MOLDED (LRM) - INTERMEDIATE MODULUS - IMPROVED TEMPERATURE PERFORMANCE - PAINTABLE TO BE USED WITH F.pdf

FORD ESB-M2D263-A4-2009 POLYURETHANE MICROCELLULAR ELASTOMER - RIM - EXTERIOR - PAINTABLE TO BE USED WITH FORD WSS-M99P1111-A 《汽车外部边缘用可印刷聚氨酯微孔弹性体 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESB-M2D280-A-2009 SILICONE ELASTOMER INHERENTLY LUBRICATED TO BE USED WITH FORD WSS-M99P1111-A 《固有润滑硅弹性体 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESB-M2D280-A2-2004 SILICONE ELASTOMER INHERENTLY LUBRICATED - POLYCARBONATE COMPATIBLE TO BE USED WITH FORD WSS-M99P1111-A 《与聚碳酸酯相容的固有润滑硅弹性体 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESB-M2D280-A3-2009 SILICONE ELASTOMER INHERENTLY LUBRICATED TO BE USED WITH FORD WSS-M99P1111-A 《固有润滑硅弹性体 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESB-M2D280-A4-2009 SILICONE ELASTOMER INHERENTLY LUBRICATED TO BE USED WITH FORD WSS-M99P1111-A 《固有润滑硅弹性体 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESB-M2D295-A-2009 SILICONE ELASTOMER EXTERIOR - WEATHERABLE TO BE USED WITH FORD WSS-M99P1111-A 《耐候型汽车外部用硅弹性体 与标准FORD WSS-M99P1111-A一起使用 》.pdf