1、Information technology UPnP Device Architecture Part 24-2: Internet gateway device control protocol Level 2 Wide area network connection device BS ISO/IEC 29341-24-2:2017 BSI Standards Publication WB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Information technology UPnP Device Architecture
2、 Part 24-2: Internet gateway device control protocol Level 2 Wide area network connection device Technologies de linformation Architecture de dispositif UPnP Partie 24-2: Protocole de contrle de dispositif de passerelle Internet Niveau 2 Dispositif de connexion de rseau tendu INTERNATIONAL STANDARD
3、ISO/IEC 29341-24-2 Reference number ISO/IEC 29341-24-2:2017(E) First edition 2017-09 ISO/IEC 2017 National foreword This British Standard is the UK implementation of ISO/IEC 29341-24-2:2017. The UK participation in its preparation was entrusted to Technical Committee ICT/-/1, Information systems co-
4、ordination. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published
5、by BSI Standards Limited 2017 ISBN 978 0 580 90852 1 ICS 35.200 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 September 2017. Amendments/corrigenda issued
6、since publication Date Text affected BRITISH STANDARD BS ISO/IEC 29341242:2017Information technology UPnP Device Architecture Part 24-2: Internet gateway device control protocol Level 2 Wide area network connection device Technologies de linformation Architecture de dispositif UPnP Partie 24-2: Prot
7、ocole de contrle de dispositif de passerelle Internet Niveau 2 Dispositif de connexion de rseau tendu INTERNATIONAL STANDARD ISO/IEC 29341-24-2 Reference number ISO/IEC 29341-24-2:2017(E) First edition 2017-09 ISO/IEC 2017 BS ISO/IEC 29341242:2017 ii ISO/IEC 2017 All rights reserved COPYRIGHT PROTEC
8、TED DOCUMENT ISO/IEC 2017, Published in Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without p
9、rior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Ch. de Blandonnet 8 CP 401 CH-1214 Vernier, Geneva, Switzerland Tel. +41 22 749 01 11 Fax +41 22 749 09 47 copyrightiso.org www.iso.org
10、ISO/IEC 29341-24-2:2017(E) BS ISO/IEC 29341242:2017 ii ISO/IEC 2017 All rights reserved COPYRIGHT PROTECTED DOCUMENT ISO/IEC 2017, Published in Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means
11、, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Ch. de Blandonnet 8 CP 401 CH-12
12、14 Vernier, Geneva, Switzerland Tel. +41 22 749 01 11 Fax +41 22 749 09 47 copyrightiso.org www.iso.org ISO/IEC 29341-24-2:2017(E) ISO/IEC 29341-24-2:2017(E) ISO/IEC 2017 All rights reserved iii CONTENTS Foreword iv 1 Scope 1 2 Normative references . 1 3 Terms, definitions, symbols and abbreviated t
13、erms . 3 4 Device model . 3 Device type 3 4.1Device architecture . 3 4.2Device requirements . 3 4.2.1Relationships between services . 5 4.2.2 5 XML Device Description . 6 6 Test 7 Annex A (informative) Theory of Operation 8 Figure 1 WANConnectionDevice devices and services hierarchy. 4 Figure A.1 Co
14、nfiguration and Connection Management . 9 Table 1 Device Requirements 4 Table A.1 Valid Combinations of LinkType and PossibleConnectionTypes . 9 BS ISO/IEC 29341242:2017ISO/IEC 29341-24-2:2017(E) iv ISO/IEC 2017 All rights reserved Foreword ISO (the International Organization for Standardization) an
15、d IE C (the International Electrotechnical Commission) form the specialized system for wo rldwide standardization. National bodies that are members of ISO or IEC participate in t he development of International Standards through technical committees established by the respective organization to deal
16、 with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other inte rnational organizations, governmental and nongovernmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC
17、 have established a joint technical committee, ISO/IEC JTC 1. The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of document should b
18、e noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see http:/www.iso.org/directives). Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shall not be held responsi
19、ble for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents). Any trade name used in this document is information given fo
20、r the convenience of users and does not constitute an endorsement. For an explanation on the voluntary nature of Standard, the meaning of the ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barrie
21、rs to Trade (TBT) see the following URL: Foreword Supplementary information ISO/IEC 29341242 was prepared by UPnP Forum and adopted, under the PAS procedure, by joint technical committee ISO/IEC JTC 1, Information technology, in parallel with its approval by national bodies of ISO and IEC. The list
22、of all currently available parts of ISO/IEC 29341 series, under the general title Information technology UPnP Device Architecture, can be found on the ISO web site. BS ISO/IEC 29341242:2017ISO/IEC 29341-24-2:2017(E) iv ISO/IEC 2017 All rights reserved Foreword ISO (the International Organization for
23、 Standardization) and IE C (the International Electrotechnical Commission) form the specialized system for wo rldwide standardization. National bodies that are members of ISO or IEC participate in t he development of International Standards through technical committees established by the respective
24、organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other inte rnational organizations, governmental and nongovernmental, in liaison with ISO and IEC, also take part in the work. In the field of information tec
25、hnology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types
26、of document should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see http:/www.iso.org/directives). Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shall
27、not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents). Any trade name used in this document is
28、information given for the convenience of users and does not constitute an endorsement. For an explanation on the voluntary nature of Standard, the meaning of the ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in
29、the Technical Barriers to Trade (TBT) see the following URL: Foreword Supplementary information ISO/IEC 29341242 was prepared by UPnP Forum and adopted, under the PAS procedure, by joint technical committee ISO/IEC JTC 1, Information technology, in parallel with its approval by national bodies of IS
30、O and IEC. The list of all currently available parts of ISO/IEC 29341 series, under the general title Information technology UPnP Device Architecture, can be found on the ISO web site. ISO/IEC 29341-24-2:2017(E) ISO/IEC 2017 All rights reserved v Introduction ISO and IEC draw attention to the fact t
31、hat it is claimed that compliance with this document may involve the use of patents as indicated below. ISO and IEC take no position concerning the evidence, validity and scope of these patent rights. The holders of -these patent rights have assured ISO and IEC that they are willing to negotiate lic
32、enses under reasonable and non-discriminatory terms and conditions with applicants throughout the world. In this respect, the statements of the holders of these patent rights are registered with ISO and IEC. Intel Corporation has informed IEC and ISO that it has patent applications or granted patent
33、s. Information may be obtained from: Intel Corporation Standards Licensing Department 5200 NE Elam Young Parkway MS: JFS-98 USA Hillsboro, Oregon 97124 Microsoft Corporation has informed IEC and ISO that it has patent applications or granted patents as listed below: 6101499 / US; 6687755 / US; 69100
34、68 / US; 7130895 / US; 6725281 / US; 7089307 / US; 7069312 / US; 10/783 524 /US Information may be obtained from: Microsoft Corporation One Microsoft Way USA Redmond WA 98052 Philips International B.V. has informed IEC and ISO that it has patent applications or granted patents. Information may be ob
35、tained from: Philips International B.V. IP 6 170 007 / US; 6 139 177 / US; 6 529 936 / US; 6 470 339 / US; 6 571 388 / US; 6 205 466 / US Information may be obtained from: Hewlett Packard Company 1501 Page Mill Road USA Palo Alto, CA 94304 Samsung Electronics Co. Ltd. has informed IEC and ISO that i
36、t has patent applications or granted patents. Information may be obtained from: Digital Media Business, Samsung Electronics Co. Ltd. 416 Maetan-3 Dong, Yeongtang-Gu, KR Suwon City 443-742 Huawei Technologies Co., Ltd. has informed IEC and ISO that it has patent applications or granted patents. Infor
37、mation may be obtained from: Huawei Technologies Co., Ltd. Administration Building, Bantian Longgang District Shenzhen China 518129 Qualcomm Incorporated has informed IEC and ISO that it has patent applications or granted patents. Information may be obtained from: Qualcomm Incorporated 5775 Morehous
38、e Drive San Diego, CA USA 92121 Telecom Italia S.p.A.has informed IEC and ISO that it has patent applications or granted patents. Information may be obtained from: Telecom Italia S.p.A. Via Reiss Romoli, 274 Turin - Italy 10148 Cisco Systems informed IEC and ISO that it has patent applications or gr
39、anted patents. Information may be obtained from: Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA USA 95134 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights other than those identified above. ISO and IEC shall not be held resp
40、onsible for identifying any or all such patent rights. BS ISO/IEC 29341242:2017ISO/IEC 29341-24-2:2017(E) vi ISO/IEC 2017 All rights reserved Hewlett Packard Company has informed IEC and ISO that it has patent applications or granted patents as listed below: 5 956 487 / US; 6 170 007 / US; 6 139 177
41、 / US; 6 529 936 / US; 6 470 339 / US; 6 571 388 / US; 6 205 466 / US Information may be obtained from: Hewlett Packard Company 1501 Page Mill Road USA Palo Alto, CA 94304 Samsung Electronics Co. Ltd. has informed IEC and ISO that it has patent applications or granted patents. Information may be obt
42、ained from: Digital Media Business, Samsung Electronics Co. Ltd. 416 Maetan-3 Dong, Yeongtang-Gu, KR Suwon City 443-742 Huawei Technologies Co., Ltd. has informed IEC and ISO that it has patent applications or granted patents. Information may be obtained from: Huawei Technologies Co., Ltd. Administr
43、ation Building, Bantian Longgang District Shenzhen China 518129 Qualcomm Incorporated has informed IEC and ISO that it has patent applications or granted patents. Information may be obtained from: Qualcomm Incorporated 5775 Morehouse Drive San Diego, CA USA 92121 Telecom Italia S.p.A.has informed IE
44、C and ISO that it has patent applications or granted patents. Information may be obtained from: Telecom Italia S.p.A. Via Reiss Romoli, 274 Turin - Italy 10148 Cisco Systems informed IEC and ISO that it has patent applications or granted patents. Information may be obtained from: Cisco Systems, Inc.
45、 170 West Tasman Drive San Jose, CA USA 95134 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights other than those identified above. ISO and IEC shall not be held responsible for identifying any or all such patent rights. ISO/IEC 29341
46、-24-2:2017(E) ISO/IEC 2017 All rights reserved vii Original UPnP Document Reference may be made in this document to original UPnP documents. These references are retained in order to maintain consistency between the specifications as published by ISO/IEC and by UPnP Implementers Corporation and late
47、r by UPnP Forum. The following table indicates the original UPnP document titles and the corresponding part of ISO/IEC 29341: UPnP Document Title ISO/IEC 29341 Part UPnP Device Architecture 1.0 ISO/IEC 29341-1:2008 UPnP Device Architecture Version 1.0 ISO/IEC 29341-1:2011 UPnP Device Architecture 1.
48、1 ISO/IEC 29341-1-1:2011 UPnP Device Architecture 2.0 ISO/IEC 29341-1-2 UPnP Basic:1 Device ISO/IEC 29341-2 UPnP AV Architecture:1 ISO/IEC 29341-3-1:2008 UPnP AV Architecture:1 ISO/IEC 29341-3-1:2011 UPnP AVTransport:1 Service ISO/IEC 29341-3-10 UPnP ConnectionManager:1 Service ISO/IEC 29341-3-11 UP
49、nP ContentDirectory:1 Service ISO/IEC 29341-3-12 UPnP RenderingControl:1 Service ISO/IEC 29341-3-13 UPnP MediaRenderer:1 Device ISO/IEC 29341-3-2 UPnP MediaRenderer:2 Device ISO/IEC 29341-3-2:2011 UPnP MediaServer:1 Device ISO/IEC 29341-3-3 UPnP AVTransport:2 Service ISO/IEC 29341-4-10:2008 UPnP AVTransport:2 Service ISO/IEC 29341-4-10:2011 UPnP ConnectionManager:2 Service ISO/IEC 29341-4-11:2008 UPnP ConnectionManager:2 Service ISO/IEC
