STAS 8866-1982 CLTRASONIC EXAMINATION OF ROLLED STEEL《轧制钢的超声波检验 》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

STAS 8812-1971 ASH SIDERURGICAL CEMENT《带灰冶金水泥 》.pdf

STAS 8813-1971 SLAG AND ASH PORTLAND CEMENT《炉渣和粉煤灰硅酸盐水泥 》.pdf

STAS 8814-1971 NAPHTEHNIC ACIDS Determination of unsaponifiable matters《环烷酸 未皂化物的测定 》.pdf

STAS 8815 1-1979 Equipment for chemical industry JOINTS WITH FLAT LINED AND WELDED-NECK FLANGES FOR WELDING General tehnical requirements for quality《化学工业设备 平，内衬和颈法兰焊接接头 一般质量技术要求 》.pdf

STAS 8815 2-1979 Equipment for chemical industry JOINTS FOR WELDING WITH FLAT LINED AND WELDED NECK FLANGE NP 2 5 Dimensions《化学工业设备 具有平内衬及焊接颈法兰的焊接接头NP2，5尺寸 》.pdf

STAS 8815 3-1979 Equipment for Chemical Industry JOINTS FOR WELDING WITH FLAT LINED AND WELDEDNECK FLANGE NP 6 Dimensions《化学工业设备 具有平内衬及焊接颈法兰的焊接接头NP 6 尺寸 》.pdf

STAS 8815 4-1979 Equipment for chemical industry JOINTS FOR WELDING WITH FLAT LINED AND WELDEDNECK FLANGE NP 10 Dimensions《化学工业设备 具有平内衬及焊接颈法兰的焊接接头NP 10 尺寸 》.pdf

STAS 8815 5-1979 Equipment for chemical industry JOINTS FOR WELDING WITH FLAT LINED AND WELDEDNECK FLANGE NP 16 Dimensions《化学工业设备 具有平内衬及焊接颈法兰的焊接接头NP 16 尺寸 》.pdf

STAS 8815 6-1982 Equipment for chemical industry WELDING JOINTS FOR WELDED-NECK LINED PLAIN FLANGE NP 25 Dimensions《化学工业设备 焊接颈部，内衬，纯法兰用的焊接接头NP25 尺寸 》.pdf