1、AMSC N/A 1 of 2 FSC 8455 INCH-POUND MIL-DTL-15665/103B 20 November 2009 SUPERSEDING MIL-DTL-15665/103A 9 November 2004 DETAIL SPECIFICATION SHEET INSIGNIA, BRANCH OF SERVICE, OFFICERS, PSYCHOLOGICAL OPERATIONS, ARMY This specification is approved for use by all Departments and Agencies of the Depart
2、ment of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and the latest issue of MIL-DTL-15665. DASH NO. -1: Regular -2: Subdued MATERIAL: -1: Red Brass -2: Red Brass or Zinc Aluminum FINISH: -1: Gold Plated, Mirror-like Polished, and sha
3、ll match The Institute of Heraldry (TIOH) Metal Finish Chip Number 6. -2: Dull Flat Black Enamel. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-15665/103B 2 of 2 DIMENSIONS: HEIGHT: 1 inch (REF) WIDTH: 1-5/32 inch (REF) THICKNESS (at thicke
4、st point): 0.120 0.005 inch NOTES: 1. The term (REF) refers to the measurements taken from the Government furnished hub or die. 2. Attaching device shall be prong and clutch. Two prongs shall be located on the reverse on the vertical center line 3/4 inch 1/64 inch apart. 3. Insignia for -1 may be ma
5、nufactured for commercial sale only using 22 karat gold plate with nickel underplating and mirror-like polish and shall match TIOH Metal Finish Chip Number 9. CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to identify changes with respect to the previous issue due to t
6、he extent of the changes. Custodian: Preparing activity: Army - IH Army - IH (Project No. 8455-2010-021) Review activities: DLA - CT NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
