1、MIL-G-70464 13 W 777770b 0354815 O W s - 3747 -5. i MIL-G- 7 O 4 6 4 (AR) 21 November 1985 MILITARY SPECIFICATION GRENADE (GP), LINER FOR This Specification is approved for use by the US Army Armament Munitions and Chemical Command, and is available for use by all Departments and Agencies of the Dep
2、artment of Defense. 1. SCOPE 1.1 Scope. This specification covers requirements, provides quality assurance provisions, and packaging for one type of liner for general purpose grenades. 2. APPLICABLE DOCUMENTS 2.1 Government documents. 2.1.1 Specifications and standards. Unless otherwise specified, t
3、he following specifications and standards of the issue listed in that issue of the Department of Defense Index of Specifications and Standards (DoDISS) specified in the solicitation, form a part of this specification to the extent specified herein. SPEC1 F ICAT IONS MILITARY MIL-A-48078 - Ammunition
4、, Standard Quality Assur- ance Provisions, General specifica- tion for STANDARDS MILITARY MIL-STD-105 - Sampling Procedures and Tables for Inspect ion by Attributes ., . Beneficial comments (recommendations, additions, deletions) and any pertirient data which may be of use in improving this document
5、 should be addressed to: Commander, US Army Armament Research and Development Center, Attn: AMSMDQA, Dover, New Jersey 07801-5001 ty using the elf-addressed Standardization Documrnf Impnivemenf Propasal (DD Fam 1426) appearing af the end of this document op by letter. FSC 1330 Approved for publie re
6、lease; distribution is unlimited. AMCC N/A DISTRIBUTION STATEMeNT A. THIS DOCUMENT CONTAINS 10 - PAGES. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-_ MIL-G-7046U- 13 777770b 035q816 2 m MIL-G-70464 (AR) 2.1.2 Other Government documents, drawinqs,
7、 and publications. The following other Government documents, drawings, and publica- tions form a part of this specification to the extent specified herein. DRAWINGS (See 6.4) US ARMY ARMAMENT RESEARCH AND DEVELOPMENT CENTER (ARDC) 9206200 - BOX, Fiber, for Cone 9345266 - Grenade liner (Copies of spe
8、cifications, standards, handbooks, drawings, and publications required by suppliers in connection with specific procurement functions should be obtained from the contracting activity or as directed by the contracting officer.) 2.1.3 Order of precedence. In the event of a conflict between the text of
9、 this specification and the references cited herein, the text of this specification shall take precedence. 3 . REQUIREMENTS 3.1 Material. Materials shall be in accordance with the applicable drawings and specifications. requirements specified on Drawing (Dwg) 9345266 and with all requirements specif
10、ied in applicable specifications. nical provisions for first article inspection. Requirements for the submission of first article samples by the contractor shall be as specified in the contract. 3.2 Grenade liner. The grenade liner shall comply with all 3.3 First article testing. This specification
11、contains tech- 3.4 Workmanship. All liners shall be fabricated and finished in a thorough, workmanlike manner. They shall be free of burrs, chips, sharp edges, cracks, unblended radii, surface defects, dirt, grease, rust, corrosion products, and other foreign matter. The cleaning method used shall n
12、ot be injurious to any parts, nor shall the parts be contaminated by the cleaning agents. 4. QUALITY ASSURANCE PROVISIONS 4.1 Responsibility for inspection and standard quality assur- ance provisions. Unless otherwise specified herein or in the contract, the provisions of MIL-A-48078 shall apply and
13、 are hereby made a part of this detail specification. 2 a Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-G-70464 13 9999906 035417 4 c MIL-G-70464 (AR) -. 4.2 Classification of inspections. The following types of inspection shall be conducted on
14、 this item: a. First article inspection. b. Quality conformance inspection. 4.3 First article inspection. 4.3.1 Submission. The contractor shall submit a first article sample as designated by the Contracting Officer for evaluation in accordance with provisions of 4.3.2. The first article sample shal
15、l consist of the following items in sample quantities as indicated. PART DESCRIPTION DRAWINGS QUANTITY Grenade liner 9345266 50 4.3.2 Inspections to be performed. See MIL-A-48078 and Table I specified herein. 4.3.3 Rejection, See MIL-A-48078. 3 O Provided by IHSNot for ResaleNo reproduction or netwo
16、rking permitted without license from IHS-,-,-d ti t rl ii M42 and M46. 6.2 Orderinq data. See MIL-A-48078. 6.3 Submission of inspection equipment desiqns for approval. See MIL-A-48078. Submit eqipment designs, as required, to Commander, US Army Armament Research and Development Center (ARDC) , ATTN:
17、 DRSMC-QAR-I (D) , Dover, NJ 07801. 6.4 Drawinqs. Drawings listed in Section 2 of this specifica- tion under the headings US Army Armament Research and Development Center (ARDC) may also include drawings prepared by and identified as Edgewood Arsenal, Frankford Arsenal, Rock Island Arsenal, Picatinn
18、y Arsenal, or ARRADCOM drawings. Technical data originally prepared by these activities is now under the cognizance of ARDC. Custodian: Army-AR Preparing activity: Army-AR (Pr oj ec t i3 30-A202 ) 10 U.8. OOVEIINMENT PRINTXNB OFCICL: 1916 - 600-OSb141ZOl Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
