1、-., . . 3.=.j”rMEASUREMENTSENSITIVE-MIL-STD-642L -15May 1991SUPERSEDINGMIL-STD-642K13,4ugust1982DEPARrHdENTOFDEFENSHSTMJDAFLDPRACTICEIDENTIFICATION MARKING OF COMBATAND TACTICAL TRANSPORT VEHICLESProvided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-.tlIL-
2、:5l General Specificationfor.Marking Materials and Markers, Adhesive,Elastomeric, Pigmented; Legends.Marking Materials and Markers, Adhesive,Elastomeric, Pigmented; Symbols.Coating, Aliphatic Polyurethane,ChemicalAgent Resistant.sting, Aliphatic Polyurethane, Singletimponent, Chemical Agent Resistan
3、t.Cokm.(Unless otherwise indicated, copies of federal and militaryspecifications, standards, and hsndbooks are available from the NawPublication and Printing Service Office , Standardization Documents OrderDesk, Elldg4D. 700 Robbins Avenue. Philadelphia, PA 1911-94.)Provided by IHSNot for ResaleNo r
4、eproduction or networking permitted without license from IHS-,-,-M :1D-642L- 2,12 GLher.,GQye.raXIJR.flt._-L4 however, theregistration number shall be applied. Except for self-propelled guns, tanksand as otherwise specified herein, the registration numbers shall be appliedon both sides and on the re
5、ar of each vehicle in a location to be readilyvisible. The rear markings shall not be obscured by the spare tire carrier,ormy other accessory or part of the vehicle. Registration markings shallllt be applied to mm.nted equient on vehicles without the prior approval ofthe procuring activity.4-1.1Agen
6、cy identificationand registration markings are notpermitted on any visible exterior surface of camouflaged ArmY vehicles andshall be located in accordance with 4.3.4.2 ,- Unit identificationmarkings shall be appliednpon receipt by the using service. Safety markings specified on vehicledrawings or sp
7、ecificationsshall be applied at the time ofmanufacture/rebuild. Additional safety markings may be applied upon receipt.-. by the using service. For Army vehicles painted with camouflage colors,instructionalmarkings shall be lusterlessblack continuous characters oneinch in height.4.2.1 Markings to be
8、 placed on heavy vehiclesused by NATC armed forces in Continental Western Europe shall conform to NATO -STANAG 2153, and shall be applied upon receipt by the using service.4.2-2 nf Unless otherwise specified inmilitary procurementdocuments, the National Symbol, a white (black for Ar!rrYvehicles) 5-p
9、ointed star (see 5.2 and figure 1) shall be applied on allvehicles destined fm direct delivery to U.S. Military or National Guardunits and test sites. The symbol shall not be applied on vehicles htendedfor foreign military sales, Grant-Aid shipments or vehirles destined for U.S.Army Depots. The symb
10、ol shall not be applied on ambulances or other medicalservice vehicles affected by InternationalAgreement concerning suchvehicles.4-2.3 Ambuhmeadsines. Ambulance markings (see 5.3 and figures 2, 3and.4) sb.allbe applied by the manufacturer.c.-lProvided by IHSNot for ResaleNo reproduction or networki
11、ng permitted without license from IHS-,-,-MIL-STW6426!4.2.4 .- New vehicle production fuel tankers(bulkhaul and fuel servicing) shall have a means by which required safetysigns in CJINUSwill contain the followingmarkings, which can be securelyfastened to each side and rear of the vehicle:a. “F?AIMAB
12、LE” in 6-inch block letters, one inch border all around.b. “NOSMOKING WITHIN 50 FEET” in 3-inch block letters, one inchborder all around-4-3 fkl. Vehicles requiring concealed markings shallhave those marks applied on a concealedbut accessible interior surfaceand shall be-readily v-bible, such as, on
13、 the inside of the map compartmentlid. Army concealed markings shall be on any appropriate area which isvisible from outside a locked and securedvehicle, or if the vehicle is notso configured, on a readily accessible concealed exterior surface, such as,on the inside of a tool box lid. Concealedmarki
14、ngs shall be applied usingstenciled decal or letters and numerals as large as practicable, but not lessthan 1/2 inch in height. When painting or application with tape isimpractical, markings shall be stamped on a 1 inch by 3 inch nonferrous metalplate and affixed in the above prescribed locations.4.
15、4 y to .,Vehicles supplied to foreign nations under Military AssistancePrograms (MAP) shall have temporary registrationnumbers placed on metal orwood tags, painted yellow, and attached in readily visible areas of thevehicle. Such markings shall remain affixed to the vehicle until arrival at foreign
16、destination- The Military AssistanceAdvisory Groups (MAAG) shall beresponsible for removing such markings and, in the case of metal or woodtags, for insuring that they are removed and destroyed.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MTI!:3I)
17、-(542L:,. DETAILKD REQUIIW%JNIS5.1 . Vehicles shall be marked with the militaryidentificationand registration number, and other special markings asspecifiedherein-5.1.1 max obstructions or configurationof thevehicle interferes ith legibility. Marki.ngaon the side osite the sideshown in the figures s
18、hall be similarly marked. For new vehicles, theprcmaring activity reserves the right of final approval for markingIocatiome For Marine Corpe markings, the letters “U S M C“ and theregistrationnumber shall DCon one 1i.w,wherever practicable.5-1-2sw.kd- The markings shall conform-tofigures 16 through
19、20. Markings shall be uniformly applied using numeralsand letters 1, 2, 3, 4 or 5 inches in height (Army, 4 inches maximum). Theuse of the largest size practicable in the available space will be thedeterminingfactor in choosing letter and numeral size. On vehicles paintedlusterlesscamouflage colors,
20、 registration numbers (characters)shall begothic, no larger than 4 inches high. Where space permits, markinge shallhave a single space between individual letters and numerals, and letter andnumeral groupe shall be separated by 2 spaces, minimum. Except as otherwisespecifiedherein, markings shall be
21、.xppliedusing stenciled or decal lettersand rnmbers.L5.1.3 . . Markings of iactical and combat vehiclescovered by this standard shall be applied with the use of marking paint(see 5.1.3-1) or adhesive backed markers (see 5.1.3.2). Marking paint shallbe used for applications on fabrics such as canvas
22、or other extremely roughsurfaces.5.1.3.1 . Marking paint shall conform to MIL-C-46168,tlXL-C-53039,TT-E-529, Class 1 or A-A1558, Class 1 ae required to providethe specified finish.5.1.3.2 ve Marking materials shall conform toTyl= 11, Class 1 of MIL-M-43719 for nonreflectivemarkers. Reflectivemarkers
23、 shall be of material conforming to Federal Swcification L-S-300,TY,peI or 11, Class 3, reflectivity 1. The National Symbol, Red Cross Kmblemand Medical Service Insignia shall also conform to tlIL-M-43719/3.All othermarkings shall conform to MIL-M-43719/2 and to 5.1-2 of this standard.,Provided by I
24、HSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-!-IIL-STD-642L5.1.4 !WQES. Color of markings shall conform, as applicable,to colorchips of FEBSTD-595 as follows:a. Lusterlesswhite No. 37875 shall he used on vehicles painted withdark lusterlessor semi-gloss colors
25、.b. Lusterless black No. 37038 shall be used on vehicles painted withlusterlessforest green and camouflage colors.c. Semi-glossyellow No- 23538 shall be used on vehicles paintedStandard Marine Carps green semi-gloss-d- hterless yellow No. 33538 shall be used on vehicles paintedStandard Marine Corps green lusterless.5.2 .Nah.maLs.Ysnbd-5.2-1 m.lIProvided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD642LFIGUREQo Oooo-Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
