1、BSI Standards PublicationBS EN 16228-7:2014Drilling and foundation equipment SafetyPart 7: Interchangeable auxiliary equipmentBS EN 16228-7:2014 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 16228-7:2014.It supersedes BS EN 791:1995+A1:2009 and BS EN 996:1995
2、+ A3:2009 which are withdrawnThe UK participation in its preparation was entrusted to Technical Committee B/513, Construction equipment and plant and site safety.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to inc
3、lude all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2014.Published by BSI Standards Limited 2014ISBN 978 0 580 73270 6ICS 93.020Compliance with a British Standard cannot confer immunity from legal obligations.This Brit
4、ish Standard was published under the authority of the Standards Policy and Strategy Committee on 31 May 2014.Amendments/corrigenda issued since publicationDate Text affectedBS EN 16228-7:2014 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 16228-7:2014.It supers
5、edes BS EN 791:1995+A1:2009 and BS EN 996:1995 + A3:2009 which are withdrawnThe UK participation in its preparation was entrusted to Technical Committee B/513, Construction equipment and plant and site safety.A list of organizations represented on this committee can be obtained on request to its sec
6、retary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2014.Published by BSI Standards Limited 2014ISBN 978 0 580 73270 6ICS 93.020Compliance with a British Standard cannot c
7、onfer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 May 2014.Amendments/corrigenda issued since publicationDate Text affectedTogether with BS EN 16228-1:2014, BS EN 16228-2:2014, BS EN 16228-3:2014, BS EN
8、16228-4:2014, BS EN 16228-5:2014 and BS EN 16228-6:2014, it supersedes BS EN 791:1995+A1:2009 and BS EN 996:1995+A3:2009, which are withdrawn.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 August 2014.BS EN 16228-7:2014EUROPEAN STANDARD N
9、ORME EUROPENNE EUROPISCHE NORM EN 16228-7 May 2014 ICS 93.020 Supersedes EN 791:1995+A1:2009, EN 996:1995+A3:2009English Version Drilling and foundation equipment - Safety - Part 7: Interchangeable auxiliary equipment Machines de forage et de fondation - Scurit - Partie 7: Equipements complmentaires
10、 interchangeables Gerte fr Bohr- und Grndungsarbeiten - Sicherheit - Teil 7: Auswechselbare Zusatzausrstungen This European Standard was approved by CEN on 6 March 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
11、Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (En
12、glish, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium
13、, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerla
14、nd, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Me
15、mbers. Ref. No. EN 16228-7:2014 EBS EN 16228-7:2014EN 16228-7:2014 (E) 2 Contents Page Foreword 3 Introduction .4 1 Scope 5 2 Normative references 5 3 Terms and definitions .6 4 List of additional significant hazards 7 5 Safety requirements and/or protective measures 9 5.1 General 9 5.2 Additional p
16、rotective measures for interchangeable auxiliary equipment .9 5.2.1 Impact hammers 9 5.2.2 Casing oscillators/rotators .9 5.2.3 Vibrators .9 5.2.4 Clamping devices for connection of pile elements to the driving tool 9 6 Verification of the safety requirements and/or protective measures 10 7 Informat
17、ion for use . 11 7.1 Marking of interchangeable auxiliary equipment 11 7.1.1 General . 11 7.1.2 Down the hole hammers (DTH-hammers) 12 7.1.3 Impact hammers . 12 7.1.4 Static pile pushing/pulling device . 12 7.1.5 Casing oscillators/rotators 12 7.1.6 Rotary drilling drives 12 7.1.7 Deep vibrators . 1
18、2 7.1.8 Vibrators 12 7.2 Instruction books for interchangeable auxiliary equipment 12 7.2.1 General . 12 7.2.2 Down the hole hammers (DTH-hammers) 13 7.2.3 Impact hammers . 13 7.2.4 Static pile pushing/pulling device . 13 7.2.5 Casing oscillators/rotators 13 7.2.6 Vibrators 13 Annex A (normative) No
19、ise test code for interchangeable auxiliary equipment . 15 A.1 General . 15 A.2 Pile installation and extracting equipment 15 A.3 Installation and operation of source under test 15 A.4 Determination of the sound power level emitted by the equipment . 17 A.5 Noise at the operators position 19 A.6 Inf
20、ormation to be recorded and to be reported . 20 A.7 Noise declaration by the manufacturer 20 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC . 21 Bibliography . 22 BS EN 16228-7:2014EN 16228-7:2014 (E) 2 Contents Page Forew
21、ord 3 Introduction .4 1 Scope 5 2 Normative references 5 3 Terms and definitions .6 4 List of additional significant hazards 7 5 Safety requirements and/or protective measures 9 5.1 General 9 5.2 Additional protective measures for interchangeable auxiliary equipment .9 5.2.1 Impact hammers 9 5.2.2 C
22、asing oscillators/rotators .9 5.2.3 Vibrators .9 5.2.4 Clamping devices for connection of pile elements to the driving tool 9 6 Verification of the safety requirements and/or protective measures 10 7 Information for use . 11 7.1 Marking of interchangeable auxiliary equipment 11 7.1.1 General . 11 7.
23、1.2 Down the hole hammers (DTH-hammers) 12 7.1.3 Impact hammers . 12 7.1.4 Static pile pushing/pulling device . 12 7.1.5 Casing oscillators/rotators 12 7.1.6 Rotary drilling drives 12 7.1.7 Deep vibrators . 12 7.1.8 Vibrators 12 7.2 Instruction books for interchangeable auxiliary equipment 12 7.2.1
24、General . 12 7.2.2 Down the hole hammers (DTH-hammers) 13 7.2.3 Impact hammers . 13 7.2.4 Static pile pushing/pulling device . 13 7.2.5 Casing oscillators/rotators 13 7.2.6 Vibrators 13 Annex A (normative) Noise test code for interchangeable auxiliary equipment . 15 A.1 General . 15 A.2 Pile install
25、ation and extracting equipment 15 A.3 Installation and operation of source under test 15 A.4 Determination of the sound power level emitted by the equipment . 17 A.5 Noise at the operators position 19 A.6 Information to be recorded and to be reported . 20 A.7 Noise declaration by the manufacturer 20
26、 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC . 21 Bibliography . 22 BS EN 16228-7:2014EN 16228-7:2014 (E) 3 Foreword This document (EN 16228-7:2014) has been prepared by Technical Committee CEN/TC 151 “Construction equi
27、pment and building material machines - Safety”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2014 and conflicting national standards shall be w
28、ithdrawn at the latest by November 2014. This document supersedes EN 791:1995+A1:2009 and EN 996:1995+A3:2009. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For
29、relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. This European Standard is divided into several parts and covers drilling and foundation equipment. Part 1 contains requirements that are/may be common to all drilling and foundation equipment. Ot
30、her parts contain additional requirements for specific machines that supplement or modify the requirements of part 1. Compliance with the clauses of part 1 together with those of a relevant specific part of this standard giving requirements for a particular machine provides one means of conforming w
31、ith the essential health and safety requirements of the Directive concerned. When a relevant specific part does not exist, part 1 can help to establish the requirements for the machine, but will not by itself provide a means of conforming to the relevant essential health and safety requirements of t
32、he Directive. This European Standard, EN 16228, Drillling and foundation equipment Safety, consists of the following parts: Part 1: Common requirements Part 2: Mobile drill rigs for civil and geotechnical engineering, quarrying and mining Part 3: Horizontal directional drilling equipment (HDD) Part
33、4: Foundation equipment Part 5: Diaphragm walling equipment Part 6: Jetting, grouting and injection equipment Part 7: Interchangeable auxiliary equipment According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this Eur
34、opean Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Sl
35、ovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 16228-7:2014EN 16228-7:2014 (E) 4 Introduction This European Standard is a type C standard as stated in EN ISO 12100. The machinery concerned and the extent to which hazards are covered are indicated in the scope of this standa
36、rd. When provisions of this type C standard are different from those which are stated in type A or B standards, the provisions of this type C standard take precedence over the provisions of the other standards, for drilling and foundation equipment that have been designed and built according to the
37、provisions of this type C standard. BS EN 16228-7:2014EN 16228-7:2014 (E) 4 Introduction This European Standard is a type C standard as stated in EN ISO 12100. The machinery concerned and the extent to which hazards are covered are indicated in the scope of this standard. When provisions of this typ
38、e C standard are different from those which are stated in type A or B standards, the provisions of this type C standard take precedence over the provisions of the other standards, for drilling and foundation equipment that have been designed and built according to the provisions of this type C stand
39、ard. BS EN 16228-7:2014EN 16228-7:2014 (E) 5 1 Scope This European Standard, together with part 1, deals with all significant hazards for interchangeable auxiliary equipment when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associa
40、ted with the whole life time of the machine (see Clause 4). The requirements of this part are complementary to the common requirements formulated in EN 16228-1:2014. This document does not repeat the requirements from EN 16228-1, but adds or replaces the requirements for application for interchangea
41、ble auxiliary equipment. This document specifies the specific safety requirements for interchangeable auxiliary equipment to be used in drilling and foundation operations, connected with drilling and foundation equipment, agricultural equipment and/or earth moving machinery when they are used as int
42、ended and under the conditions of misuse which are reasonably foreseeable by the manufacturer. Interchangeable auxiliary equipment includes pile installation and extraction equipment, impact hammers, extractors, vibrators, deep vibrators, static pile pushing/pulling devices, rotary percussion hammer
43、s, rotary drilling drives, drill mast equipment such as leaders equipped with a drill stem and gears attached to the boom of an excavator and casing oscillators/rotators. Diaphragm wall cutting tools are dealt with in EN 16228-5. 2 Normative references The following documents, in whole or in part, a
44、re normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 16228-1:2014, Drilling and foundation equipment Saf
45、ety Part 1: General requirements EN 16228-2:2014, Drilling and foundation equipment Safety Part 2: Mobile drill rigs for civil and geotechnical engineering, quarrying and mining EN 16228-3:2014, Drilling and foundation equipment Safety Part 3: Horizontal directional drilling equipment (HDD) EN 16228
46、-4:2014, Drilling and foundation equipment Safety Part 4: Foundation equipment EN 16228-5:2014, Drilling and foundation equipment Safety Part 5: Diaphragm walling equipment EN 16228-6:2014, Drilling and foundation equipment Safety Part 6: Jetting, grouting and injection equipment EN ISO 3744:2010, A
47、coustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) EN ISO 11201:2010, Acoustics Noise emitted by machinery and equipment Determination of emission sound p
48、ressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010) EN ISO 11203:2009, Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a
49、 work station and at other specified positions from the sound power level (ISO 11203:1995) BS EN 16228-7:2014EN 16228-7:2014 (E) 6 EN ISO 12100:2010, Safety of machinery General principles for design Risk assessment and risk reduction (ISO 12100:2010) 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN ISO 12100:2010, EN 16228-1:2014 and the following apply. NOTE Examples are given in Annex A of EN 162281:2014. 3.1 rotary percussion hammers equipment to drill holes into th
