1、BSI Standards PublicationIndustrial communication networks ProfilesPart 5-16: Installation of fieldbuses Installation profiles for CPF 16BS EN 61784-5-16:2013Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking
2、 permitted without license from IHS-,-,-National forewordThis British Standard is the UK implementation of EN 61784-5-16:2013. It isidentical to IEC 61784-5-16:2013.The UK participation in its preparation was entrusted to Technical Com-mittee AMT/7, Industrial communications: process measurement and
3、control, including fieldbus.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 20
4、14.Published by BSI Standards Limited 2014ISBN 978 0 580 84201 6ICS 25.040.40; 35.100.40Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 January 2014.Amendments/
5、corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 61784-5-16:2013Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-EUROPEAN STANDARD EN 61784-5
6、-16 NORME EUROPENNE EUROPISCHE NORM December 2013 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels 2013 CENELEC - All rig
7、hts of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61784-5-16:2013 E ICS 25.040.40; 35.100.40 English version Industrial communication networks - Profiles - Part 5-16: Installation of fieldbuses - Installation profiles for CPF 16 (IEC 61784-5-16:2013
8、) Rseaux de communication industriels - Profils - Partie 5-16: Installation des bus de terrain - Profils dinstallation pour CPF 16 (CEI 61784-5-16:2013) Industrielle Kommunikationsnetze - Profile - Teil 5-16: Feldbusinstallation - Installationsprofile fr die Kommunikationsprofilfamilie 16 (IEC 61784
9、-5-16:2013) This European Standard was approved by CENELEC on 2013-10-18. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibl
10、iographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the re
11、sponsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Fi
12、nland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 61784-5-16:2013Copyr
13、ight British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-EN 61784-5-16:2013 - 2 - Foreword The text of document 65C/738/FDIS, future edition 1 of IEC 61784-5-16, prepared by SC 65C
14、 “Industrial networks“ of IEC/TC 65 “Industrial-process measurement, control and automation“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61784-5-16:2013. The following dates are fixed: latest date by which the document has to be implemented at national level by publi
15、cation of an identical national standard or by endorsement (dop) 2014-07-18 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2016-10-18 This standard is to be used in conjunction with EN 61918:2013. Attention is drawn to the possibility that some o
16、f the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61784-5-16:2013 was approved by CENELEC as a European Standard without an
17、y modification. BS EN 61784-5-16:2013Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,- 3 - EN 61784-5-16:2013 Annex ZA (normative) Normative references to internationa
18、l publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the r
19、eferenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Annex ZA of EN 61918:2013 applies, except as follows: Publication Year Title EN/HD Year Addition to Annex ZA of EN
20、61918:2013: IEC 61918 2013 Industrial communication networks - Installation of communication networks in industrial premises EN 61918 2013 BS EN 61784-5-16:2013Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networki
21、ng permitted without license from IHS-,-,- 2 61784-5-16 IEC:2013 CONTENTS INTRODUCTION . 9 1 Scope . 10 2 Normative references . 10 3 Terms, definitions and abbreviated terms . 10 4 CPF 16: Overview of installation profiles 10 5 Installation profile conventions . 10 6 Conformance to installation pro
22、files 11 Annex A (normative) CP 16/1 (SERCOS I) and CP 16/2 (SERCOS II) specific installation profile . 13 A.1 Installation profile scope . 13 A.2 Normative references . 13 A.3 Installation profile terms, definitions, and abbreviated terms . 13 A.3.1 Terms and definitions 13 A.3.2 Abbreviated terms
23、. 13 A.3.3 Conventions for installation profiles . 13 A.4 Installation planning . 13 A.4.1 General . 13 A.4.1.1 Objective . 13 A.4.1.2 Cabling in industrial premises 13 A.4.1.3 The planning process 13 A.4.1.4 Specific requirements for CPs . 13 A.4.1.5 Specific requirements for generic cabling in acc
24、ordance with ISO/IEC 24702 13 A.4.2 Planning requirements . 13 A.4.2.1 Safety 13 A.4.2.2 Security . 13 A.4.2.3 Environmental considerations and EMC . 14 A.4.2.4 Specific requirements for generic cabling in accordance with ISO/IEC 24702 14 A.4.3 Network capabilities 14 A.4.3.1 Network topology . 14 A
25、.4.3.2 Network characteristics . 14 A.4.4 Selection and use of cabling components 15 A.4.4.1 Cable selection . 15 A.4.4.2 Connecting hardware selection . 16 A.4.4.3 Connections within a channel/permanent link 17 A.4.4.4 Terminators 17 A.4.4.5 Device location and connection . 18 A.4.4.6 Coding and la
26、belling . 18 A.4.4.7 Earthing and bonding of equipment and devices and shielded cabling 18 A.4.4.8 Storage and transportation of cables . 18 A.4.4.9 Routing of cables 18 A.4.4.10 Separation of circuit 18 A.4.4.11 Mechanical protection of cabling components . 18 BS EN 61784-5-16:2013Copyright British
27、 Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-61784-5-16 IEC:2013 3 A.4.4.12 Installation in special areas . 18 A.4.5 Cabling planning documentation 19 A.4.6 Verification of cabling
28、 planning specification . 19 A.5 Installation implementation . 19 A.5.1 General requirements 19 A.5.2 Cable installation . 19 A.5.2.1 General requirements for all cabling types . 19 A.5.2.2 Installation and routing 20 A.5.3 Connector installation 20 A.5.3.1 Common description 20 A.5.3.2 Shielded con
29、nectors 20 A.5.3.3 Unshielded connectors 20 A.5.3.4 Specific requirements for CPs . 20 A.5.3.5 Specific requirements for wireless installation 20 A.5.4 Terminator installation . 20 A.5.5 Device installation . 20 A.5.6 Coding and labelling 20 A.5.7 Earthing and bonding of equipment and devices and sh
30、ield cabling . 20 A.5.8 As-implemented cabling documentation . 20 A.6 Installation verification and installation acceptance test 20 A.6.1 General . 20 A.6.2 Installation verification . 20 A.6.2.1 General . 20 A.6.2.2 Verification according to cabling planning documentation 20 A.6.2.3 Verification of
31、 earthing and bonding 21 A.6.2.4 Verification of shield earthing 21 A.6.2.5 Verification of cabling system 21 A.6.2.6 Cable selection verification . 21 A.6.2.7 Connector verification . 21 A.6.2.8 Connection verification 21 A.6.2.9 Terminators verification . 21 A.6.2.10 Coding and labelling verificat
32、ion . 21 A.6.2.11 Verification report . 21 A.6.3 Installation acceptance test . 21 A.6.3.1 General . 22 A.6.3.2 Acceptance test of Ethernet-based cabling 22 A.6.3.3 Acceptance test of non-Ethernet-based cabling . 22 A.6.3.4 Specific requirements for wireless installation 22 A.6.3.5 Acceptance test r
33、eport . 22 A.7 Installation administration . 22 A.7.1 General . 22 A.7.2 Fields covered by the administration . 22 A.7.3 Basic principles for the administration system . 22 A.7.4 Working procedures 22 A.7.5 Device location labelling 22 A.7.6 Component cabling labelling 22 A.7.7 Documentation 22 A.7.
34、8 Specific requirements for administration 22 A.8 Installation maintenance and installation troubleshooting . 22 BS EN 61784-5-16:2013Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without licen
35、se from IHS-,-,- 4 61784-5-16 IEC:2013 A.8.1 General . 22 A.8.2 Maintenance 22 A.8.3 Troubleshooting 22 A.8.4 Specific requirements for maintenance and troubleshooting 22 Annex B (normative) CP 16/3 (SERCOS III) specific installation profile 23 B.1 Installation profile scope . 23 B.2 Normative refer
36、ences . 23 B.3 Installation profile terms, definitions, and abbreviated terms . 23 B.3.1 Terms and definitions 23 B.3.2 Abbreviated terms . 23 B.3.3 Conventions for installation profiles . 23 B.4 Installation planning . 23 B.4.1 General . 23 B.4.1.1 Objective . 23 B.4.1.2 Cabling in industrial premi
37、ses 23 B.4.1.3 The planning process 23 B.4.1.4 Specific requirements for CPs . 23 B.4.1.5 Specific requirements for generic cabling in accordance with ISO/IEC 24702 23 B.4.2 Planning requirements . 23 B.4.2.1 Safety 23 B.4.2.2 Security . 23 B.4.2.3 Environmental considerations and EMC . 24 B.4.2.4 S
38、pecific requirements for generic cabling in accordance with ISO/IEC 24702 24 B.4.3 Network capabilities 24 B.4.3.1 Network topology . 24 B.4.3.2 Network characteristics . 24 B.4.4 Selection and use of cabling components 26 B.4.4.1 Cable selection . 26 B.4.4.2 Connecting hardware selection . 30 B.4.4
39、.3 Connections within a channel/permanent link 31 B.4.4.4 Terminators 32 B.4.4.5 Device location and connection . 32 B.4.4.6 Coding and labelling . 32 B.4.4.7 Earthing and bonding of equipment and devices and shielded cabling 33 B.4.4.8 Storage and transportation of cables . 33 B.4.4.9 Routing of ca
40、bles 33 B.4.4.10 Separation of circuit 33 B.4.4.11 Mechanical protection of cabling components . 33 B.4.4.12 Installation in special areas . 33 B.4.5 Cabling planning documentation 33 B.4.6 Verification of cabling planning specification . 33 B.5 Installation implementation . 33 B.5.1 General require
41、ments 33 B.5.2 Cable installation . 33 B.5.2.1 General requirements for all cabling types . 33 B.5.2.2 Installation and routing 35 BS EN 61784-5-16:2013Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permi
42、tted without license from IHS-,-,-61784-5-16 IEC:2013 5 B.5.2.3 Specific requirements for CPs . 35 B.5.2.4 Specific requirements for wireless installation 35 B.5.2.5 Specific requirements for generic cabling in accordance with ISO/IEC 24702 35 B.5.3 Connector installation 35 B.5.4 Terminator install
43、ation . 35 B.5.5 Device installation . 35 B.5.6 Coding and labelling 35 B.5.7 Earthing and bonding of equipment and devices and shield cabling . 35 B.5.8 As-implemented cabling documentation . 35 B.6 Installation verification and installation acceptance test 35 B.6.1 General . 35 B.6.2 Installation
44、verification . 35 B.6.3 Installation acceptance test . 35 B.7 Installation administration . 35 B.7.1 General . 35 B.7.2 Fields covered by the administration . 35 B.7.3 Basic principles for the administration system . 35 B.7.4 Working procedures 35 B.7.5 Device location labelling 36 B.7.6 Component c
45、abling labelling 36 B.7.7 Documentation 36 B.7.8 Specific requirements for administration 36 B.8 Installation maintenance and installation troubleshooting . 36 B.8.1 General . 36 B.8.2 Maintenance 36 B.8.3 Troubleshooting 36 B.8.4 Specific requirements for maintenance and troubleshooting 36 Bibliogr
46、aphy 37 Figure 1 Standards relationships 9 Table A.1 Network characteristics for optical fibre cabling 15 Table A.2 Information relevant to optical fibre cables . 16 Table A.3 Optical fibre connecting hardware 16 Table A.4 Relationship between FOC and fibre types (CP 16/1 and CP 16/2) . 17 Table A.5
47、 Parameters for POF optical fibre cables . 19 Table A.6 Parameters for hard clad silica optical fibre cables . 19 Table B.1 Network characteristics for balanced cabling based on Ethernet 25 Table B.2 Network characteristics for optical fibre cabling 26 Table B.3 Information relevant to copper cable:
48、 CP 16/3 Type A (fixed cables) 27 Table B.4 Information relevant to copper cable: CP 16/3 Type B (flexible cables) 28 Table B.5 Information relevant to copper cable: CP 16/3 Type C (special cables) 29 Table B.6 Information relevant to optical fibre cables . 30 Table B.7 Connectors for balanced cabling CPs based on Ethernet . 30 Table B.8 Optical fibre connecting hardware 31 Table B.9 Relationship between FOC and fibre types (CP 16/3) 31 BS EN 61784-5-16:2013Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo repr
