CAN CSA-C61869-1-2014 Instrument transformers - Part 1 General requirements (First Edition Incorporating Errata August 2015).pdf

上传人:medalangle361 文档编号:589683 上传时间:2018-12-15 格式:PDF 页数:184 大小:3.21MB
下载 相关 举报
CAN CSA-C61869-1-2014 Instrument transformers - Part 1 General requirements (First Edition Incorporating Errata August 2015).pdf_第1页
第1页 / 共184页
CAN CSA-C61869-1-2014 Instrument transformers - Part 1 General requirements (First Edition Incorporating Errata August 2015).pdf_第2页
第2页 / 共184页
CAN CSA-C61869-1-2014 Instrument transformers - Part 1 General requirements (First Edition Incorporating Errata August 2015).pdf_第3页
第3页 / 共184页
CAN CSA-C61869-1-2014 Instrument transformers - Part 1 General requirements (First Edition Incorporating Errata August 2015).pdf_第4页
第4页 / 共184页
CAN CSA-C61869-1-2014 Instrument transformers - Part 1 General requirements (First Edition Incorporating Errata August 2015).pdf_第5页
第5页 / 共184页
亲,该文档总共184页,到这儿已超出免费预览范围,如果喜欢就下载吧!
资源描述

1、 IEC 2007. CSA Group 2014. All rights reserved. Unauthorized reproduction is strictly prohibited. REVISED AUGUST 2015 CEI 2007. Groupe CSA 2014. Tous droits rservs. Toute reproduction sans autorisation est strictement interdite. RVISE EN AOT 2015CAN/CSA-C61869-1:14(IEC 61869-1:2007, MOD)National Sta

2、ndard of CanadaNorme nationale du CanadaCAN/CSA-C61869-1:14Transformateurs de mesure Partie 1 : Exigences gnrales(IEC 61869-1:2007, MOD)CAN/CSA-C61869-1:14Instrument transformers Part 1: General requirements(IEC 61869-1:2007, MOD)Legal Notice for StandardsCanadian Standards Association (operating as

3、 “CSA Group”) develops standards through a consensus standards development process approvedby the Standards Council of Canada. This process brings together volunteers representing varied viewpoints and interests to achieve consensusand develop a standard. Although CSA Group administers the process a

4、nd establishes rules to promote fairness in achieving consensus, it doesnot independently test, evaluate, or verify the content of standards.Disclaimer and exclusion of liabilityThis document is provided without any representations, warranties, or conditions of any kind, express or implied, includin

5、g, without limitation,implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or its non-infringementof any third partys intellectual property rights. CSA Group does not warrant the accuracy, completeness, or currency of any of the inf

6、ormationpublished in this document. CSA Group makes no representations or warranties regarding this documents compliance with any applicablestatute, rule, or regulation.IN NO EVENT SHALL CSA GROUP, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS,OR OFFIC

7、ERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED,INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGEDDATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS,WHETHER BASED IN CONTRA

8、CT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHERTHEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA GROUPHAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available,

9、 CSA Group is not undertaking to render professional or other services for or on behalf of anyperson or entity or to perform any duty owed by any person or entity to another person or entity. The information in this document is directedto those who have the appropriate degree of experience to use an

10、d apply its contents, and CSA Group accepts no responsibility whatsoeverarising in any way from any and all use of or reliance on the information contained in this document.CSA Group is a private not-for-profit company that publishes voluntary standards and related documents. CSA Group has no power,

11、 nor does itundertake, to enforce compliance with the contents of the standards or other documents it publishes.Intellectual property rights and ownershipAs between CSA Group and the users of this document (whether it be in printed or electronic form), CSA Group is the owner, or the authorizedlicens

12、ee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), and allinventions and trade secrets that may be contained in this document, whether or not such inventions and trade secrets are protected bypatents and applications for pa

13、tents. Without limitation, the unauthorized use, modification, copying, or disclosure of this document mayviolate laws that protect CSA Groups and/or others intellectual property and may give rise to a right in CSA Group and/or others to seek legalredress for such use, modification, copying, or disc

14、losure. To the extent permitted by licence or by law, CSA Group reserves all intellectualproperty rights in this document.Patent rightsAttention is drawn to the possibility that some of the elements of this standard may be the subject of patent rights. CSA Group shall not beheld responsible for iden

15、tifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity ofany such patent rights is entirely their own responsibility.Authorized use of this documentThis document is being provided by CSA Group for informational and non-commercial use on

16、ly. The user of this document is authorized to doonly the following:If this document is in electronic form: load this document onto a computer for the sole purpose of reviewing it; search and browse this document; and print this document if it is in PDF format.Limited copies of this document in prin

17、t or paper form may be distributed only to persons who are authorized by CSA Group to have suchcopies, and only if this Legal Notice appears on each such copy.In addition, users may not and may not permit others to alter this document in any way or remove this Legal Notice from the attached standard

18、; sell this document without authorization from CSA Group; or make an electronic copy of this document.If you do not agree with any of the terms and conditions contained in this Legal Notice, you may not load or use this document or make anycopies of the contents hereof, and if you do make such copi

19、es, you are required to destroy them immediately. Use of this documentconstitutes your acceptance of the terms and conditions of this Legal Notice.Avis juridique concernant les normesLAssociation canadienne de normalisation (qui exerce ses activits sous le nom Groupe CSA) labore des normes selon un

20、processusconsensuel approuv par le Conseil canadien des normes. Ce processus rassemble des volontaires reprsentant diffrents intrts et points devue dans le but datteindre un consensus et dlaborer une norme. Bien que le Groupe CSA assure ladministration de ce processus etdtermine les rgles qui favori

21、sent lquit dans la recherche du consensus, il ne met pas lessai, ni nvalue ou vrifie de faon indpendantele contenu de ces normes.Exclusion de responsabilitCe document est fourni sans assertion, garantie ni condition explicite ou implicite de quelque nature que ce soit, y compris, mais non de faonlim

22、itative, les garanties ou conditions implicites relatives la qualit marchande, ladaptation un usage particulier ainsi qu labsence deviolation des droits de proprit intellectuelle des tiers. Le Groupe CSA ne fournit aucune garantie relative lexactitude, lintgralit ou lapertinence des renseignements c

23、ontenus dans ce document. En outre, le Groupe CSA ne fait aucune assertion ni ne fournit aucune garantiequant la conformit de ce document aux lois et aux rglements pertinents.LE GROUPE CSA, SES VOLONTAIRES, SES MEMBRES, SES FILIALES OU SES SOCITS AFFILIES DE MME QUE LEURS EMPLOYS, LEURSDIRIGEANTS ET

24、 LEURS ADMINISTRATEURS NE PEUVENT EN AUCUN CAS TRE TENUS RESPONSABLES DE TOUTE BLESSURE, PERTE OU DPENSEOU DE TOUT PRJUDICE DIRECT, INDIRECT OU ACCESSOIRE, Y COMPRIS, MAIS NON DE FAON LIMITATIVE, TOUT PRJUDICE SPCIAL OUCONSCUTIF,TOUTE PERTE DE RECETTES OU DE CLIENTLE,TOUTE PERTE DEXPLOITATION, TOUTE

25、 PERTE OU ALTRATION DE DONNES OUTOUT AUTRE PRJUDICE CONOMIQUE OU COMMERCIAL, QUIL SOIT FOND SUR UN CONTRAT, UN DLIT CIVIL (Y COMPRIS LE DLIT DENGLIGENCE) OU TOUT AUTRE LMENT DE RESPONSABILIT TIRANT SON ORIGINE DE QUELQUE FAON QUE CE SOIT DE LUTILISATION DE CEDOCUMENT ET CE, MME SI LE GROUPE CSA A T

26、AVIS DE LVENTUALIT DE TELS PRJUDICES.En publiant et en offrant ce document, le Groupe CSA nentend pas fournir des services professionnels ou autres au nom de quelque personneou entit que ce soit, ni remplir les engagements que de telles personnes ou entits auraient pris auprs de tiers. Les renseigne

27、mentsprsents dans ce document sont destins aux utilisateurs qui possdent le niveau dexprience ncessaire pour utiliser et mettre enapplication ce contenu. Le Groupe CSA rejette toute responsabilit dcoulant de quelque faon que ce soit de toute utilisation desrenseignements contenus dans ce document ou

28、 de toute confiance place en ceux-ci.Le Groupe CSA est un organisme priv sans but lucratif qui publie des normes volontaires et des documents connexes. Le Groupe CSA nentendpas imposer la conformit au contenu des normes et des autres documents quelle publie et ne possde pas lautorit ncessaire pour c

29、e faire.Proprit et droits de proprit intellectuelleTel que convenu entre le Groupe CSA et les utilisateurs de ce document (quil soit imprim ou sur support lectronique), le Groupe CSA estpropritaire ou titulaire de permis de toutes les marques de commerce ( moins dindication contraire) et de tous les

30、 documents contenusdans ce document, ces derniers tant protgs par les lois visant les droits dauteur. Le Groupe CSA est galement propritaire ou titulaire depermis de toutes les inventions et de tous les secrets commerciaux que pourrait contenir ce document, quils soient ou non protgs par desbrevets

31、ou des demandes de brevet. Sans que soit limite la porte gnrale du paragraphe, lutilisation, la modification, la copie ou ladivulgation non autorise de ce document pourrait contrevenir aux lois visant la proprit intellectuelle du Groupe CSA ou dautres parties etdonner ainsi droit lorganisme ou autre

32、 partie dexercer ses recours lgaux relativement une telle utilisation, modification, copie oudivulgation. Dans la mesure prvue par le permis ou la loi, le Groupe CSA conserve tous les droits de proprit intellectuelle relatifs cedocument.Droits de brevetVeuillez noter quil est possible que certaines

33、parties de cette norme soient vises par des droits de brevet. Le Groupe CSA ne peut tre tenueresponsable didentifier tous les droits de brevet. Les utilisateurs de cette norme sont aviss que cest eux quil incombe de vrifier la validitde ces droits de brevet.Utilisations autorises de ce documentCe do

34、cument est fourni par le Groupe CSA des fins informationnelles et non commerciales seulement. Lutilisateur de ce document nestautoris qu effectuer les actions dcrites ci-dessous.Si le document est prsent sur support lectronique, lutilisateur est autoris : tlcharger ce document sur un ordinateur dans

35、 le seul but de le consulter ; consulter et parcourir ce document ; imprimer ce document si cest une version PDF.Un nombre limit dexemplaires imprims ou lectroniques de ce document peuvent tre distribus aux seules personnes autorises par leGroupe CSA possder de tels exemplaires et uniquement si le p

36、rsent avis juridique figure sur chacun deux.De plus, les utilisateurs ne sont pas autoriss effectuer, ou permettre quon effectue, les actions suivantes : modifier ce document de quelque faon que ce soit ou retirer le prsent avis juridique joint ce document ; vendre ce document sans lautorisation du

37、Groupe CSA ; faire une copie lectronique de ce document.Si vous tes en dsaccord avec lune ou lautre des dispositions du prsent avis juridique, vous ntes pas autoris tlcharger ou utiliser cedocument, ni en reproduire le contenu, auquel cas vous tes tenu den dtruire toutes les copies. En utilisant ce

38、document, vous confirmezque vous acceptez les dispositions du prsent avis juridique.Revision HistoryCAN/CSA-C61869-1:14, Instrument transformers Part 1: GeneralrequirementsErrata AUGUST 2015 Revision symbol (inmargin)Clauses 5.2, 5.3.2, 5.3.3.1, 6.13, 7.2.3.1, 7.2.4, 7.3.1, 7.3.2.2,7.4.1, and 7.4.2T

39、ables 2, 3, and 10Historique des modificationsCAN/CSA-C61869-1:14, Transformateurs de mesure Partie 1 :Exigences gnralesErrata AOT 2015Symbole indiquant lesmodifications (dans lamarge)Articles 5.2, 5.3.2, 5.3.3.1, 6.13, 7.2.3.1, 7.2.4, 7.3.1, 7.3.2.2,7.4.1 et 7.4.2Tableaux 2, 3 et 10Standards Update

40、 ServiceCAN/CSA-C61869-1:14December 2014Title: Instrument transformers Part 1: General requirementsTo register for e-mail notification about any updates to this publication go to shop.csa.ca click on CSA Update ServiceThe List ID that you will need to register for updates to this publication is 2423

41、059.If you require assistance, please e-mail techsupportcsagroup.org or call 416-747-2233.Visit CSA Groups policy on privacy at www.csagroup.org/legal to find out how we protect yourpersonal information.Service de mise jour des normesCAN/CSA-C61869-1:14Dcembre 2014Titre : Transformateurs de mesure P

42、artie 1 : Exigences gnralesVous devez vous inscrire pour recevoir les avis transmis par courriel au sujet des mises jour apportes ce document : allez au shop.csa.ca cliquez sur Service de mises jourLe numro didentification dont vous avez besoin pour vous inscrire pour les mises jour apportes ce docu

43、ment est le 2423059.Si vous avez besoin daide, veuillez nous contacter par courriel au techsupportcsagroup.org ou partlphone au 416-747-2233.Consultez la politique du Groupe CSA en matire de confidentialit au www.csagroup.org/legal poursavoir comment nous protgeons vos renseignements personnels.Cana

44、dian Standards Association (operating as “CSA Group”), underwhose auspices this National Standard has been produced, waschartered in 1919 and accredited by the Standards Council ofCanada to the National Standards system in 1973. It is a not-for-profit, nonstatutory, voluntary membership association

45、engaged instandards development and certification activities.CSA Group standards reflect a national consensus of producers andusers including manufacturers, consumers, retailers, unions andprofessional organizations, and governmental agencies. Thestandards are used widely by industry and commerce an

46、d oftenadopted by municipal, provincial, and federal governments in theirregulations, particularly in the fields of health, safety, building andconstruction, and the environment.Individuals, companies, and associations across Canada indicatetheir support for CSA Groups standards development byvolunt

47、eering their time and skills to Committee work and supportingCSA Groups objectives through sustaining memberships. The morethan 7000 committee volunteers and the 2000 sustainingmemberships together form CSA Groups total membership fromwhich its Directors are chosen. Sustaining memberships represent

48、amajor source of income for CSA Groups standards developmentactivities.CSA Group offers certification and testing services in support of andas an extension to its standards development activities. To ensurethe integrity of its certification process, CSA Group regularly andcontinually audits and inspects products that bear theCSA Group Mark.In addition to its head office and laboratory complex in Toronto, CSAGroup has regional branch offices in major centres across Canadaand inspection and testing agencies in eight countries. Since 1919,CSA Group has developed the necessary expe

展开阅读全文
相关资源
猜你喜欢
  • AECMA PREN 2519-1994 Titanium TI-P04 540 MPa Less Than or Equal to Rm Less Than or Equal to 740 MPa Bars De Less Than or Equal to 200 mm Aerospace Series Edition 2 [Refer To ASD-ST.pdf AECMA PREN 2519-1994 Titanium TI-P04 540 MPa Less Than or Equal to Rm Less Than or Equal to 740 MPa Bars De Less Than or Equal to 200 mm Aerospace Series Edition 2 [Refer To ASD-ST.pdf
  • AECMA PREN 2520-1982 Titanium TI-P04 540 MPa Less Than or Equal to Rm Less Than or Equal to 740 MPa Forgings De Less Than or Equal to 200 mm Aerospace Series Edition 1《航空航天系列钛锻件 TI.pdf AECMA PREN 2520-1982 Titanium TI-P04 540 MPa Less Than or Equal to Rm Less Than or Equal to 740 MPa Forgings De Less Than or Equal to 200 mm Aerospace Series Edition 1《航空航天系列钛锻件 TI.pdf
  • AECMA PREN 2521-1994 Titanium Alloy TI-P11 540 MPa Less Than or Equal to Rm Less Than or Equal to 700 MPa Bars De Less Than or Equal to 200 mm Aerospace Series Edition 2 [Refer To .pdf AECMA PREN 2521-1994 Titanium Alloy TI-P11 540 MPa Less Than or Equal to Rm Less Than or Equal to 700 MPa Bars De Less Than or Equal to 200 mm Aerospace Series Edition 2 [Refer To .pdf
  • AECMA PREN 2522-1982 Titanium Alloy TI-P11 540 MPa Less Than or Equal to Rm - Less Than or Equal to 700 MPa Forgings De Less Than or Equal to 200 mm Aerospace Series Edition 1《航空航天.pdf AECMA PREN 2522-1982 Titanium Alloy TI-P11 540 MPa Less Than or Equal to Rm - Less Than or Equal to 700 MPa Forgings De Less Than or Equal to 200 mm Aerospace Series Edition 1《航空航天.pdf
  • AECMA PREN 2523-1982 Titanium alloy TI-P11 650 MPa Less Than or Equal to Rm Less Than or Equal to 880 MPa Bars De Less Than or Equal to 75 mm Aerospace Series Edition 1《航空航天系列钛合金棒材.pdf AECMA PREN 2523-1982 Titanium alloy TI-P11 650 MPa Less Than or Equal to Rm Less Than or Equal to 880 MPa Bars De Less Than or Equal to 75 mm Aerospace Series Edition 1《航空航天系列钛合金棒材.pdf
  • AECMA PREN 2524-1982 Titanium Alloy TI-P11 650 MPa Less Than or Greater to Rm Less Than or Greater to 880 MPa Forgings De Less Than or Equal to 75 mm Aerospace Series Edition 1《航空航.pdf AECMA PREN 2524-1982 Titanium Alloy TI-P11 650 MPa Less Than or Greater to Rm Less Than or Greater to 880 MPa Forgings De Less Than or Equal to 75 mm Aerospace Series Edition 1《航空航.pdf
  • AECMA PREN 2525-1983 Titanium TI-P01 290 MPa Less Than Rm Less Than or Equal to 420 MPa Sheets and Strips a Less Than or Equal to 5 mm Aerospace Series Edition 1《航空航天系列钛片和带 TI-P04 .pdf AECMA PREN 2525-1983 Titanium TI-P01 290 MPa Less Than Rm Less Than or Equal to 420 MPa Sheets and Strips a Less Than or Equal to 5 mm Aerospace Series Edition 1《航空航天系列钛片和带 TI-P04 .pdf
  • AECMA PREN 2526-1983 Titanium TI-P02 390 MPa Less Than Rm Less Than or Equal to 540 MPa Sheets and Strips a Less Than or Equal to 5 mm Aerospace Series Edition 1《航空航天系列.钛片和带TI-P04 .pdf AECMA PREN 2526-1983 Titanium TI-P02 390 MPa Less Than Rm Less Than or Equal to 540 MPa Sheets and Strips a Less Than or Equal to 5 mm Aerospace Series Edition 1《航空航天系列.钛片和带TI-P04 .pdf
  • AECMA PREN 2527-1983 Titanium TI-P04 570 MPa Less Than Rm Less Than or Equal to 730 MPa Sheets and Strips a Less Than or Equal to 5 mm Aerospace Series Edition 1《航空航天系列钛片和带TI-P04 5.pdf AECMA PREN 2527-1983 Titanium TI-P04 570 MPa Less Than Rm Less Than or Equal to 730 MPa Sheets and Strips a Less Than or Equal to 5 mm Aerospace Series Edition 1《航空航天系列钛片和带TI-P04 5.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1