CNS 4117-1991 Lamp Pole for Illumination of Road《道路照明用灯杆（渐细型）》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D2557-1998(2017) Standard Test Method for Tensile-Shear Strength of Adhesives in the Subzero Temperature Range from −267.8 to −55 C (−450 to −67 F).pdf

ASTM D2680-2001(2014) Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping《丙烯腈-丁二烯-苯乙烯共聚物 (ABS) 和聚氯.pdf

ASTM D3596-2014 Standard Practice for Determination of Gels (Fisheyes) In General-Purpose Poly(Vinyl Chloride) (PVC) Resins《通用聚氯乙烯 (PVC) 树脂中凝胶 (斑点) 测定的标准实施规程》.pdf

ASTM D3681-2012e1 Standard Test Method for Chemical Resistance of “Fiberglass” (Glass–Fiber–Reinforced Thermosetting-Resin) Pipe in a Deflected Condition.pdf

ASTM D4625-2016e1 Standard Test Method for Middle Distillate Fuel Storage Stability at 43 C (110 F)《在43摄氏度(110 F)下的中间馏分燃料储存稳定性的标准测试方法》.pdf

ASTM D4680-1998(2017) Standard Test Method for Creep and Time to Failure of Adhesives in Static Shear by Compression Loading (Wood-to-Wood)《采用压缩负荷法(木材对木材)测定胶粘剂静剪切蠕变和破坏时间的标准试验方法》.pdf

ASTM D4682-1987(2002) Standard Specification for Miscibility with Gasoline and Fluidity of Two-Stroke-Cycle Gasoline Engine Lubricants《二冲程循环汽油发动机润滑剂的流动性及与汽油的可混合性》.pdf

ASTM D4682-2008 Standard Specification for Miscibility with Gasoline and Fluidity of Two-Stroke-Cycle Gasoline Engine Lubricants《二冲程循环汽油发动机润滑剂的流动性及与汽油的可混合性的标准规范》.pdf

ASTM D4682-2013 Standard Specification for Miscibility with Gasoline and Fluidity of Two-Stroke-Cycle Gasoline Engine Lubricants《二冲程循环汽油发动机润滑剂的流动性及与汽油的可混合性的标准规格》.pdf