1、INCH-POUND MIL-DTL-5423/6D 17 February 2009 SUPERSEDING MIL-DTL-5423/6C 4 February 2008 DETAIL SPECIFICATION SHEET BOOT, DUST AND WATER SEAL, TYPE B (FOR PUSH-BUTTON SWITCHES), STYLE 1 (ONE HOLE MOUNTING, ADAPTER TYPE) This specification sheet is approved for use by all Departments and Agencies of t
2、he Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-5423. Inches mm .005 .010 .020 .094 .469 .500 .510 .687 .844 .875 0.13 0.25 0.51 2.39 11.91 12.70 12.95 17.45 21.44 22.23 NOTES: 1. Dimensions are in inches. 2.
3、 Metric equivalents are given for general information only and are based upon 1 inch = 25.4 mm. 3. Unless otherwise specified, tolerances are .015 (.38 mm). FIGURE 1. Dimensions and configuration boot type B, style 1. AMSC N/A FSC 5930 Provided by IHSNot for ResaleNo reproduction or networking permi
4、tted without license from IHS-,-,-MIL-DTL-5423/6D 2 REQUIREMENTS: Dimensions and configuration: See figure 1. Silicon rubber: Grade 50. Part or Identifying Number (PIN): See table I. TABLE I. Size and PINs. Dimensions Size A B PIN M5423/06- 1/ 1 1/ 2 3 4 .438 (11.18) .688 (17.48) .438 (11.18) .688 (
5、17.48) .625-27 UNS-2A .625-27 UNS-2A .625-24 UNS-2A .625-24 UNS-2A 01 02 03 04 1/ Inactive for new design. Qualification: First Article Testing in accordance with MIL-DTL-5423. The margins of this specification are marked with vertical lines to indicate where modifications were made. This was done a
6、s a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the requirements of this document based on the entire content irrespective of the marginal notations. Referenced documents: MIL-DTL-5423
7、Custodians: Preparing activity: Army - CR DLA - CC Navy - AS Air Force - 85 (Project 5930-2008-063) DLA - CC Review activities: Army AT, CR4, MI Navy CG, EC, MC, OS Air Force 99 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
