1、 MS27617B 14 October 2009 SUPERSEDING MS27617A 29 September 2000 DETAIL SPECIFICATION SHEET ADAPTER ASSEMBLY, FLARED, 45 ELBOW, TUBE TO HOSE-WITH SWIVEL NUT This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product
2、 described herein shall consist of this specification sheet and MIL-DTL-83296. FIGURE 1. Elbow, 45, flared, adapter assembly. AMSC N/A FSC 4730 INCH-POUND Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27617B 2 PIN Elbow sub assembly Sleeve Socket
3、 A max inch (cm) MS27617-4C MS27620-4C MS27623-4C MS27622-4C 2.23 (5.66) MS27617-6C MS27620-6C MS27623-6C MS27622-6C 2.52 (6.40) MS27617-8C MS27620-8C MS27623-8C MS27622-8C 3.00 (7.62) MS27617-10C MS27620-10C MS27623-10C MS27622-10C 2.73 (6.93) NOTES: 1. Dimensions are in inches. 2. Metric equivalen
4、ts are given for information only. 3. Dimensioning and tolerancing are in accordance with ASME Y14.5M. FIGURE 1. Elbow, 45, flared, adapter assembly - Continued. REQUIREMENTS: Dimensions and configurations: The design, construction, and physical dimensions shall be in accordance with MIL-DTL-83296 a
5、nd figure 1, in case of conflict between this specification sheet and MIL-DTL-83296, this specification sheet shall govern. This part for use with MIL-DTL-83298 hose and hose assemblies in accordance with MIL-DTL-32330. Material: Material shall be corrosion resistant steel. Sizes -4 thru -8 shall ha
6、ve a forged design. Size -10 shall have a bent tube design. Finish: Finish shall be passivated as specified in MIL-DTL-83296. PIN example: MS27617 -4 C PIN example: MS27617-4C indicates a 45 adapter assembly 1/4 inch, CRES. Material (C for CRES) Dash size (see figure 1) Specification sheet number MS
7、 prefix Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27617B 3 Changes from previous issue. Marginal notations are not used in this revision to identify changes due to the extent of the changes Referenced documents. In addition to MIL-DTL-83296,
8、this document references the following: MIL-DTL-83298 MIL-DTL-32330 ASME Y14.5M SAE-AS4395 CONCLUDING MATERIAL Custodians: Preparing activity: Army - AV DLA - CC Navy - AS Air Force - 99 (Project 4730-2008-035) DLA - CC Review activities: Navy - MC, SA Air Force - 71 NOTE: The activities listed abov
9、e were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
