1、Energy Performance of Buildings - Building Management SystemPart 1: Module M10-12BS EN 16947-1:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 16947-1 May 2017 ICS 91.120.10; 97.120 English Version Energy Perfo
2、rmance of Buildings - Building Management System - Part 1: Module M10-12 Performance nergtique des btiments - Systme de gestion technique des btiments - Partie 1 : Module M10-12 Energieeffizienz von Gebuden - Gebudemanagementsystem - Teil 1: Module M10-12This European Standard was approved by CEN on
3、 27 February 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards m
4、ay be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified
5、 to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Icelan
6、d, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC
7、 Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16947-1:2017 ENational forewordThis British Standard is the UK implementation of EN 16947-1:2017.The UK participation in its
8、 preparation was entrusted to Technical Committee RHE/16, Performance requirements for control systems.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are
9、responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 91972 5ICS 97.120; 91.120.10Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority
10、of the Standards Policy and Strategy Committee on 30 June 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 16947-1:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 16947-1 May 2017 ICS 91.120.10; 97.120 English Version Energy Performance of Buildings
11、 - Building Management System - Part 1: Module M10-12 Performance nergtique des btiments - Systme de gestion technique des btiments - Partie 1 : Module M10-12 Energieeffizienz von Gebuden - Gebudemanagementsystem - Teil 1: Module M10-12This European Standard was approved by CEN on 27 February 2017.
12、CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on a
13、pplication to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
14、 Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
15、Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre:
16、 Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16947-1:2017 EBS EN 16947-1:2017EN 16947-1:2017 (E) 2 Contents Page European foreword . 4 Introduction 5 1 Scope 6 2 Normative references 8 3 T
17、erms and definitions . 8 4 Symbols and subscripts 9 4.1 Symbols . 9 4.2 Subscripts . 9 5 Description of the methods . 9 5.1 Output of the method . 9 5.2 General description of the method(s) 10 5.3 Calculation time steps 10 6 BMS function 1 (management of setpoints) . 11 6.1 Output data . 11 6.2 Inpu
18、t data - Source of data 11 6.3 Calculation procedure 12 6.3.1 Operating conditions calculation . 12 6.3.2 Energy calculation . 14 7 BMS function 2 (runtime management) 14 7.1 Output data . 14 7.2 Input data 14 7.2.1 Source of data 14 7.2.2 Operating conditions 14 7.3 Calculation procedure 15 7.3.1 O
19、perating conditions calculation . 15 7.3.2 Energy calculation . 16 8 BMS function 3 (sequencing of generators) . 16 8.1 Output data . 16 8.2 Input data 16 8.2.1 Source of data 16 8.2.2 Operating conditions 16 8.3 Calculation procedure 16 8.3.1 Operating conditions calculation . 16 8.3.2 Energy calcu
20、lation . 17 9 BMS function 4 (Local energy production and renewable energies) 19 9.1 Output data . 19 9.2 Input data source of data 19 9.3 Calculation procedure Energy calculation . 19 10 BMS function 5 (heat recovery / heat shifting) . 19 10.1 Output data . 19 10.2 Input data 20 10.2.1 Source of da
21、ta 20 10.2.2 Operating conditions 20 BS EN 16947-1:2017EN 16947-1:2017 (E) 3 11 BMS function 6 (smart grid) . 20 11.1 Output data . 20 11.2 Input data 20 12 Simplified input data correlations . 20 13 Quality control . 20 14 Compliance check . 20 Annex A (informative) Short description of BMS main fu
22、nctions 21 Bibliography . 22 BS EN 16947-1:2017EN 16947-1:2017 (E) 4 European foreword This document (EN 16947-1:2017) has been prepared by Technical Committee CEN/TC 247 “Building Automation, Controls and Building Management”, the secretariat of which is held by SNV. This European Standard shall be
23、 given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2017 and conflicting national standards shall be withdrawn at the latest by November 2017. Attention is drawn to the possibility that some of the elements of this documen
24、t may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. This document is part of the set of
25、standards on the energy performance of buildings (the set of EPB standards) and has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association (Mandate M/480, 8), and supports essential requirements of EU Directive 2010/31/EC on the energy performan
26、ce of buildings (EPBD, 9). In case this standard is used in the context of national or regional legal requirements, mandatory choices may be given at national or regional level for such specific applications, in particular for the application within the context of EU Directives transposed into natio
27、nal legal requirements. Further target groups are users of the voluntary common European Union certification scheme for the energy performance of non-residential buildings (EPBD art.11.9) and any other regional (e.g. Pan European) parties wanting to motivate their assumptions by classifying the buil
28、ding energy performance for a dedicated building stock. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Fin
29、land, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 16947-1:2017EN 16
30、947-1:2017 (E) 5 Introduction This standard is part of a series of standards aiming at international harmonization of the methodology for the assessment of the energy performance of buildings, called “EPB set of standards”. As part of the “EPB set of standards” it complies with the requirements for
31、the set of basic EPB documents EN ISO 52000-1:2017 (see Normative references), CEN/TS 16628 and CEN/TS 16629 (see bibliography 2 and 3) developed under a mandate given to CEN by the European Commission and the European Free Trade Association (Mandate M/480), and supports essential requirements of EU
32、 Directive 2010/31/EU on the energy performance of buildings (EPBD). The standards issued by TC 247 for M/480 belong to the EPB set of standards and are in line with the over-arching standard (EN ISO 52000-1:2017) and drafted in accordance with the basic principles and detailed technical rules devel
33、oped in the Phase I of the mandate. Also these standards are clearly identified in the modular structure developed to ensure a transparent and coherent EPB standard set. BAC (Building Automation and Control) is identified in the modular structure as Technical Building System M10. However, the standa
34、rds of TC 247 deal with control accuracy, control functions and control strategies using standards communications protocol (these last standards do not belong to the EPB standards set). To avoid a duplication of calculation due to the BAC (avoid double impact), no calculation are done in BAC EPB sta
35、ndard set, but in each underlying standard of EPB set of standards (from M1 to M9 in the Modular Structure), an IDENTIFIER developed and present in the M10 covered by EN 15232-1 is used where appropriate. These way of interaction is described in detailed in the Technical Report (CEN ISO/TR 52000-2:2
36、017) accompanying the over-arching standard. As consequence, the Annex A and Annex B concept as EXCEL sheet with the calculation formulas used in the EPB standards are not applicable for the standards issued by TC 247 for M/480. The main target groups of this standard are all the users of the set of
37、 EPB standards (e.g. architects, engineers, regulators). Further target groups are parties wanting to motivate their assumptions by classifying the building energy performance for a dedicated building stock. More information is provided in the Technical Report accompanying this standard (CEN/TR 1694
38、7-2:2016 1). BS EN 16947-1:2017EN 16947-1:2017 (E) 6 1 Scope This European Standard specifies operational activities, overall alarming, fault detection and diagnostics, reporting, monitoring, energy management functions, functional interlocks and optimizations to set and maintain energy performance
39、of buildings. Table 1 shows the relative position of this standard within the set of EPB standards in the context of the modular structure as set out in EN ISO 52000-1:2017. NOTE 1 In CEN ISO/TR 52000-2:2017 the same table can be found, with, for each module, the numbers of the relevant EPB standard
40、s and accompanying Technical Reports that are published or in preparation. NOTE 2 The modules represent EPB standards, although one EPB standard may cover more than one module and one module may be covered by more than one EPB standard, for instance a simplified and a detailed method respectively. B
41、S EN 16947-1:2017EN 16947-1:2017 (E) 7 Table 1 Position of this standard (in casu M1012), within the modular structure of the set of EPB standards Over-arching Building (as such) Technical Building System SubmoduleDescriptionsDescriptionsDescriptionsHeatingCoolingVentilationHumidificationDehumidific
42、ationDomesticHot watersLightingBuildingautomationandcontrolPV,windsub1 M1 M2 M3 M4 M5 M6 M7 M8 M9 M10 M11 1 General General General 2 Common terms and definitions; symbols, units and subscripts Building Energy Needs Needs 3 Application (Free) Indoor Conditions without Systems Maximum Load and Power
43、4 Ways to Express Energy Performance Ways to Express Energy Performance Ways to Express Energy Performance 5 Building Functions and Building Boundaries Heat Transfer by Transmission Emission and control 6 Building Occupancy and Operating Conditions Heat Transfer by Infiltration and Ventilation Distr
44、ibution and control 7 Aggregation of Energy Services and Energy Carriers Internal Heat Gains Storage and control 8 Building Partitioning Solar Heat Gains Generation and control 9 Calculated Energy Performance Building Dynamics (thermal mass) Load dispatching and operating conditions 10 Measured Ener
45、gy Performance Measured Energy Performance Measured Energy Performance 11 Inspection Inspection Inspection 12 Ways to Express Indoor Comfort BMS x 13 External Environment Conditions 14aEconomic Calculation aThe shaded modules are not applicable. BS EN 16947-1:2017EN 16947-1:2017 (E) 8 2 Normative re
46、ferences The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies
47、. EN ISO 52000-1:2017, Energy performance of buildings - Overarching EPB assessment - Part 1: General framework and procedures (ISO 52000-1:2017) EN ISO 52016-1, Energy performance of buildings - Calculation of the energy needs for heating and cooling, internal temperatures and heating and cooling l
48、oad in a building or building zone - Part 1: Calculation procedures (ISO 52016-1) EN 15232-1:2017, Energy Performance of Buildings - Energy performance of buildings - Part 1: Impact of Building Automation, Controls and Building Management - Modules M10-4,5,6,7,8,9,10 EN 15316-2, Energy performance o
49、f buildings - Method for calculation of system energy requirements and system efficiencies - Part 2: Space emission systems (heating and cooling), Module M3-5, M4-5 EN 15316-3, Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 3: Space distribution systems (DHW, heating and cooling), Module M3-6, M4-6, M8-6 EN 15316-4-4, Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-
