1、BRITISH STANDARD Communication cables - Specifications for test methods - Part 1-3: Electrical test methods - Dielectric strength The European Standard EN 50289-1-3:2001 has the status of a British Standard ICs 33.120.10 BS EN 5 O 2 8 9-1-3: 20 O 1 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITT
2、ED BY COPYRIGHT LAW BS EN 50289-1-32001 This British Standard, having been prepared under the direction of the Electrotechnical Sector Committee, was published under the authority of the Standards Committee and comes into effect on 15 August 2001 National foreword This British Standard is the offici
3、al English language version of The UK participation in its preparation was entrusted by Technical Committee EPL146, Cables, wire and waveguides, RF connectors, and accessories for communication and signalling, to Subcommittee EPU4611, Communication cables, which has the responsibility to: EN 50289-1
4、-312001. - - aid enquirers to understand the text; present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. - A list of organi
5、zations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Stand
6、ards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standa
7、rd does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 6, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the document was last
8、issued. Amendments issued since publication Amd. No. IDate I Comments O BSI 07-2001 ISBN O 580 38090 4 EUROPEAN STANDARD EN 50289-1-3 NORME EUROPENNE EUROPISCHE NORM June 2001 ICs 33.120.20 English version Communication cables - S peci f cat ions for test met hods Part 1-3: Electrical test methods -
9、 Dielectric strength 0 Cbles de communication - Ko mmu ni kat i o ns ka bel - Spezifikationen fr Prfverfahren Teil 1-3: Elektrische Prfverfahren - Spcifications des mthodes dessai Partie 1-3: Mthodes dessais lectriques - Rigidit dilectrique Spannungsfestigkeit des Dielektrikums This European Standar
10、d was approved by CENELEC on 2000-12-01. CENELEC members are bound to comply with the CENKENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning
11、such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its ow
12、n language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Port
13、ugal, Spain, Sweden, Switzerland and United Kingdom. CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2001 CENELEC - All rights o
14、f exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 50289-1-32001 E EN 50289-1-3:2001 -2- Foreword This European Standard was prepared by SC 46XC, Multicore, Multipair and Quad Data communication cables, of Technical Committee CENELEC TC 46X, Communication
15、 cables. The text of the draft was submitted to the formal vote and was approved by CENELEC as EN 50289-1-3 on 2000-12-01. The following dates were fixed: - latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 20
16、02-01 -01 - latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2004-01-01 This European Standard has been prepared under the European Mandate M/212 given to CENELEC by the European Commission and the European Free Trade Association. O -3- Contents EN 50289
17、-1-3:2001 . Foreword 2 Scope . 4 Normative references 4 Defin it ions 4 Test method 5 4.1 Test voltages 5 4.2 Equipment 5 4.3 Test sample 5 4.4 Procedure . 5 4.4.1 Symmetric cables . 5 4.4.2 Multi-conductor cables 5 4.4.3 Coaxial cables 5 4.4.4 Armoured cables 5 5 Expression of test results . 6 6 Te
18、st report 6 EN 50289-1-3:2001 -4- 1 Scope This Part 1-3 of EN 50289 details the test methods to verify the dielectric strength of the insulation of the finished cables used in analogue and digital communication systems. It is to be read in conjunction with Part 1-1 of EN 50289, which contains essent
19、ial provisions for its application. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references
20、, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to a p pl i es (i n cl ud i ng am end m e n ts) . EN 50289-1-1 2001 Commun
21、ication cables - Specifications for tests methods - Part 1-1: Electrical test methods - General requirements EN 50290-1-2l Communication cables - Part 1-2: Definitions 3 Definitions For the purposes of this European Standard the definitions given in EN 50290-1-2 apply in addition to the following on
22、es. 3.1 group test the group test for multi-element cables (if applicable) is the test between two specified groups of conductors each of which has all its conductors connected together : A Figure 1 - Starquads Figure 2 - Pairs Table 1 Pairs Starquads ) At draft stage -5- EN 50289-1-3:2001 4 Test me
23、thod 4.1 Test voltages a The test shall be performed with AC or DC voltage in accordance with the relevant specification. 4.2 Equipment The test equipment shall be capable of providing the energy and measuring the voltages required to test a complete delivery length. A protective resistance of adequ
24、ately high value shall be connected in the circuit supplying the required test voltage to the cable under test (CUT). 4.3 Test sample Both ends of the CUT shall be prepared such that, when the specified voltage is supplied to the conductors/screen for test, there shall be no breakdown or significant
25、 partial discharges at the terminations. 4.4 Procedure The test shall be carried out on the CUT after the continuity or the conductor resistance test. The voltage shall be applied at a rate not exceeding 1 kV/s up to the voltage specified. The cable shall be deemed to pass when the specified voltage
26、 is maintained for the period of time specified in the relevant cable standard. 4.4.1 Symmetric cables The test shall be carried out on the CUT connected to the test equipment as follows : - core test group ,I“ against group ,Il“, one group earthed; - screen test group ,I“ together with ,Il“ against
27、 screen, screen earthed. 4.4.2 Multi-conductor cables The test shall be carried out on the CUT connected to the test equipment as follows : a - core test each conductor against all the other conductors (all other conductors connected together) or a group test may be performed if practical; - screen
28、test all conductors against the screen, screen earthed. 4.4.3 Coaxial cables The CUT shall be connected to the test equipment as follows : - inner conductor against outer conductor, outer conductor earthed except for armoured cables. 4.4.4 Armoured cables If a dielectric strength test for the beddin
29、g of armoured cables is required, the test shall be i carried out as for a screened cable unless otherwise specified. a EN 50289-1 -3:2001 5 Expression of test results -6- The value of the test voltage and the period of time of testing are specified in the relevant cable 0 specification. 6 Test repo
30、rt The test report shall record whether the CUT has passed or failed the dielectric strength test. Details of any group testing shall be included in the test report. BS EN 5 O 2 89-1-3 : 200 1 BSI 389 Chiswick High Road London w4 4AL 3SI - British Standards Institution IS1 is the independent nationa
31、l body responsible for preparing Iritish Standards. It presents the UK view on standards in Europe and at the nternational level. It is incorporated by Royal Charter. levisions Iritish Standards are updated by amendment or revision. Users of Iritish Standards should make sure that they possess the l
32、atest amendments or ditions. t is the constant aim of BSI to improve the quality of our products and services. Ve would be grateful if anyone finding an inaccuracy or ambiguity while using his British Standard would inform the Secretary of the technical committee esponsible, the identity of which ca
33、n be found on the inside front cover. ?el: 020 8996 9000. Fax: 020 8996 7400. 3SI offers members an individual updating service called PLUS which ensures hat subscribers automatically receive the latest editions of standards. 3uying standards hders for all BSI, international and foreign standards pu
34、blications should be iddressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. Standards are also available from the BSI website at httr,:/www.bsi-. :n response to orders for international standards, it is BSI policy to supply the 3SI implementation of those that have been published as
35、 British Standards, mless otherwise requested. nformation on standards BSI provides a wide range of information on national, European and .nternational standards through its Library and its Technical Help to Exporters service. Various BSI electronic information services are also available which give
36、 letails on all its products and services. Contact the Information Centre. Fel: 020 8996 7111. Fax: 020 8996 7048. Subscribing members of BSI are kept up to date with standards developments ind receive substantial discounts on the purchase price of standards. For details 3f these and other benefits
37、contact Membership Administration. Tel: 020 8996 7002. Fax: 020 8996 7001. Further information about BSI is available on the BSI website at httr,:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standar
38、dization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means - electronic, photocopying, recording or otherwise - without prior written permission from BSI. This does not p
39、reclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel: 020 8996 7070.
