1、BRITISH STANDARD BS EN 60399:2004 Barrel thread for lampholders with shade holder ring ICS 29.140.10 +A1:2008National foreword This British Standard is the UK implementation of EN 60399:2004+A1:2008. It is identical with IEC 60399:2004, incorporating amendment 1:2008. It supersedes BS EN 60399:2004
2、which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee CPL/34/2, Lamp caps and holders. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisio
3、ns of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. BS EN 60399:2004+A1:2008 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 29 November 2004 B
4、SI 2009 Amendments/corrigenda issued since publication Date Comments 31 October 2009 Implementation of IEC amendment 1:2008 with CENELEC endorsement A1:2008. Addition of new Clauses 1, 2 and 3 ISBN 978 0 580 59631 5EUROPEAN STANDARD EN 60399:2004+A1 NORME EUROPENNE EUROPISCHE NORM September 2008 CEN
5、ELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2004 CENELEC - All rights of exploitation in any form and by any means reserved wor
6、ldwide for CENELEC members. Ref. No. EN 60399:2004 E ICS 29.140.10 Supersedes EN 60399:1993 + A1:1997 + A2:1999 English version Barrel thread for lampholders with shade holder ring (IEC 60399:2004) Filetage filet rond pour douilles avec bague support dabat-jour (CEI 60399:2004) Mantelgewinde fr Lamp
7、enfassungen mit Schirmtrgerring (IEC 60399:2004) This European Standard was approved by CENELEC on 2004-10-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any
8、alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made
9、by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland,
10、 France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Foreword to amendment A1 The text of document 34B/1382/FDIS, future amendment 1 to IEC 60399:200
11、4, prepared by SC 34B, Lamp caps and holders, of IEC TC 34, Lamps and related equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as amendment A1 to EN 60399:2004 on 2008-08-01. The following dates were fixed: latest date by which the amendment has to be implemented
12、 at national level by publication of an identical national standard or by endorsement (dop) 2009-05-01 latest date by which the national standards conflicting with the amendment have to be withdrawn (dow) 2011-08-01 Annex ZA has been added by CENELEC. _ Endorsement notice The text of amendment 1:200
13、8 to the International Standard IEC 60399:2004 was approved by CENELEC as an amendment to the European Standard without any modification. _ BS EN 60399:2004+A1:2008 EN 60399:2004+A1:2008 Page 2 Foreword The text of document 34B/1150/FDIS, future edition 2 of IEC 60399, prepared by SC 34B, Lamp caps
14、and holders, of IEC TC 34, Lamps and related equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60399 on 2004-10-01. This European Standard supersedes EN 60399:1993 + A1:1997 + A2:1999. The main change compared to EN 60399:1993 is that the range of barrel thr
15、ead type of lampholders with shade holder ring is extended. Also the title is changed. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2005-07-01 latest date by which the nati
16、onal standards conflicting with the EN have to be withdrawn (dow) 2007-10-01 _ Endorsement notice The text of the International Standard IEC 60399:2004 was approved by CENELEC as a European Standard without any modification. _ 1.2 Normative references The following referenced documents are indispens
17、able for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60238, Edison screw lampholders IEC 60400, Lampholders for tubular flurorescent lamps and sta
18、rterholders IEC 60598-1, Luminaires Part 1: General requirements and tests IEC 60838-1, Miscellaneous lampholders Part 1: General requirements and tests IEC 61184, Bayonet lampholders 2 Terms and definitions For the purposes of this document, the following terms and definitions apply. 2.1 barrel thr
19、ead external thread on the outer shell of a lampholder intended to support a shade ring 2.2 shade ring cylindrical component having an internal thread to engage a corresponding support on the outer shell of a lampholder and intended to carry or retain a shade. 3 Requirements to barrel threads 3.1 Ge
20、neral requirements For B15 and B22 lampholders, barrel threads other than those shown in this standard may be used, providing they comply with Figure 8 of IEC 61184. For other lampholders, barrel threads other than those shown in this standard may be used where the lampholder is to be installed only
21、 by a luminaire or equipment manufacturer. In all other cases, barrel threads as specified in this standard are mandatory. 3.2 Dimensional requirements and gauges 1 General 1.1 Scope This international standard applies to lampholders designed with a barrel thread for shade holder rings designed to k
22、eep attachments to lampholders in place. It also covers barrel threads for shade holder rings. Attention is drawn to lampholder safety standards IEC 60238, IEC 60400, IEC 60838-1 and IEC 61184 which cover all aspects of lampholder safety and to the luminaire standard IEC 60598-1 which contains infor
23、mation for luminaire design. BS EN 60399:2004+A1:2008EN 60399:2004+A1:2008 Page 3IEC 60399 CEI 60399 60399-IEC-01-1 FILETAGE FILETS RONDS POUR DOUILLES EN MTAL OU EN MATIRE PLASTIQUE AVEC BAGUE SUPPORT DABAT- JOUR EN MTAL OU EN MATIRE PLASTIQUE BARREL THREAD FOR METAL OR PLASTIC LAMPHOLDERS WITH MET
24、AL OR PLASTIC Page 1/1 SHADE HOLDER RING Dimensions in millimetres - Dimensions en millimtres DIMENSIONS LIMITES DU FILETAGE POUR DOUILLES EN MTAL OU EN MATIRE PLASTIQUE AVEC BAGUE SUPPORT DABAT-JOUR EN MTAL OU EN MATIRE PLASTIQUE LIMIT DIMENSIONS OF THREAD FOR METAL OR PLASTIC LAMPHOLDERS WITH SHAD
25、E HOLDER RINGS MADE OF METAL OR PLASTIC H H D1 D d d1 Douille Lampholder Bague Ring R2 R1 R1 R2 1)Ces dimensions de filetage peuvent aussi tre utilises pour des douilles en cramique avec des filetage filet rond. Il est prvu dutiliser la mme bague support dabat-jour pour tous les types de douilles. 1
26、)These thread dimensions may also be used for ceramic lampholders with barrel thread. It is intended to use the same shade holder rings for all type of lampholders. Le filetage filets ronds pour douilles ainsi que le filetage de la bague support dabat-jour peuvent tre discontinus. Le premier pas de
27、recouvrement des deux filetages doit couvrir au moins 75 % de la circonfrence. The barrel thread of lampholders and the thread of shade holder rings may be interrupted. The first overlapping pitch of both threads shall cover at least 75 % of the circumference. Douille Lampholder Bague Ring Dimension
28、 d d1 D D1 H R1 R2 Max. Min. Max. Min. Min. Max. 20,8 2 20,8 1)20,4 1) 19,4 1) 21,0 19,6 19,8 2 0,58 0,45 28 2 28 27,7 26,6 28,1 26,7 27 2 0,58 0,45 40 2,5 40 39,6 38,2 40,1 38,3 38,7 2,5 0,7 0,55 BS EN 60399:2004+A1:2008 EN 60399:2004+A1:2008 Page 4IEC 60399 CEI 60399 60399-IEC-02-1 FILETAGE FILETS
29、 RONDS POUR DOUILLES CRAMIQUES AVEC BAGUE SUPPORT DABAT- JOUR EN MTAL OU EN MATIRE PLASTIQUE BARREL THREAD FOR CERAMIC LAMPHOLDERS WITH METAL OR PLASTIC SHADE HOLDER RING Page 1/1 Dimensions in millimetres - Dimensions en millimtres DIMENSIONS LIMITES DU FILETAGE POUR DOUILLES CRAMIQUES AVEC BAGUE S
30、UPPORT DABAT-JOUR EN MTAL OU EN MATIRE PLASTIQUE LIMIT DIMENSIONS OF THREAD FOR CERAMIC LAMPHOLDERS WITH SHADE HOLDER RINGS MADE OF METAL OR PLASTIC 2,74 50 2,74 d d1 D1 D Bague Ring Douille Lampholder 50 d1 d Douille Lampholder 2,74 D1 Bague Ring D 30 2,74 0,5 0,5 max. 0,5 0,5 max. 0,5 0,5 max. 0,6
31、9 0,69 Le filetage filets ronds pour douilles ainsi que le filetage de la bague support dabat-jour peuvent tre discontinus. Le premier pas de recouvrement des deux filetages doit couvrir au moins 75 % de la circonfrence. The barrel thread of lampholders and the thread of shade holder rings may be in
32、terrupted. The first overlapping pitch of both threads shall cover at least 75 % of the circumference. Douille Lampholder Bague Ring Dimension d d1 D D1 Max. Min. Max. Min. Min. Max. 35 2,74 35 34,5 32,5 35,5 33 33,2 45 2,74 45 44,5 42,5 45,5 43 43,2 Bague en matire plastique Plastic ring Bague en m
33、tal Metal ring BS EN 60399:2004+A1:2008EN 60399:2004+A1:2008 Page 5IEC 60399 CEI 60399 60399-IEC-03-1 CALIBRES POUR FILETAGE DES BAGUES SUPPORT DABAT- JOUR GAUGES FOR BARREL THREAD OF SHADE HOLDER RINGS Page 1/2 Dimensions in millimetres - Dimensions en millimtres Figure 1 Calibres Entre et Nentre p
34、as pour bagues support dabat-jour “Go“ and “Not Go“ gauges for shade holder rings F G E1 17010 251 Surface T D1 D D4 D3 (1) (2) (3) (4) H R2 D1 D H D1 D R1 30 R1 R2 E Tol. D & D1 D3 Dimension D D1 Fabric. Manuf. Usure Wear Max. Min. D4 1) E E1 F G H 0,01 R1 R2 20,8 2 21,0 19,6 +0,03 0,03 19,805 19,7
35、95 19,4 13 11 5 5 2 0,58 0,45 28 2 28,1 26,7 +0,03 0,03 27,005 26,995 26,6 13 11 5 5 2 0,58 0,45 40 2,5 40,1 38,3 +0,03 0,03 38,705 38,695 38,2 16 13 6 6 2,5 0,7 0,55 35 2,74 35,5 33,0 +0,03 0,03 33,205 33,195 32,9 16 13 6 6 2,74 0,69 2) /0,5 3) 0,69 2) /0,5 3) 45 2,74 45,5 43,0 +0,03 0,03 43,205 43
36、,195 42,9 16 13 6 6 2,74 0,69 2) /0,5 3) 0,69 2) /0,5 3) 1) Pour des raisons de centrage uniquement. 2)Bague support dabat-jour en mtal. 3)Bague support dabat-jour en matire plastique. 1) For centering purposes only. 2)Metal shade holder ring. 3)Plastic shade holder ring. (1) Calibre Entre - “Go“ ga
37、uge (2) Calibre Nentre pas - “Not Go“ gauge (3) Angle vif - Sharp edge (4) Angle lgrement chanfrein - Edge slightly chamfered Filetage 20,8 2 ou 28 2 ou 40 2,5 et bague en mtal 35 2,74 ou 45 2,74 Thread 20,8 2 or 28 2 or 40 2,5 and metal ring 35 2,74 or 45 2,74 Filetage 35 2,74 ou 45 2,74 pour bague
38、 en matire plastique Thread 35 2,74 or 45 2,74 for plastic ring BS EN 60399:2004+A1:2008 EN 60399:2004+A1:2008 Page 6IEC 60399 CEI 60399 60399-IEC-03-1 CALIBRES POUR FILETAGE DES BAGUES SUPPORT DABAT- JOUR GAUGES FOR BARREL THREAD OF SHADE HOLDER RINGS Page 2/2 Dimensions in millimetres - Dimensions
39、 en millimtres BUT Calibre Entre: Contrle des dimensions minimales du filetage dune bague support dabat-jour. Calibre Nentre pas: Contrle du maximum du diamtre infrieur D1 du taraudage femelle. ESSAI Calibre Entre: Il doit tre possible de lintroduire compltement sans forcer. Calibre Nentre pas: Il n
40、e doit pas tre possible de lengager par son propre poids au-del de la surface T. MATIRE: Acier. Les parties exposes lusure doivent tre trempes. PURPOSE “Go“ gauge: Control of the minimum dimensions of the screw threads of a shade holder ring. “Not Go“ gauge: Control of the maximum minor diameter D1
41、of the female screw thread. TESTING “Go gauge: It shall be possible to screw it completely in without undue force. “Not Go“ gauge: It shall not be possible to insert it by its own weight until surface T. MATERIAL: Steel. Parts exposed to wear shall be hardened. BS EN 60399:2004+A1:2008EN 60399:2004+
42、A1:2008 Page 7IEC 60399 CEI 60399 60399-IEC-04-1 CALIBRES POUR FILETAGE DES DOUILLES AVEC BAGUE SUPPORT DABAT- JOUR GAUGES FOR BARREL THREAD OF LAMPHOLDERS WITH SHADE HOLDER RING Page 1/1 Dimensions in millimetres - Dimensions en millimtres Figure 2 Calibre Entre “Go“ gauge Calibre Nentre pas “Not G
43、o“ gauge d1 d d4 E d3 d4 E 1x45 H d d1 d1 d 0,2 H 30 R1 R2 R1 R2 Tol. d & d1 d3 Dimension d d1 Fabric. Manuf. Usure Wear Min. Max. d4 0,5 E 0,1 H 0,01 R1 R2 20,8 2 20,8 19,4 0,03 +0,03 20,395 20,405 35 13 2 0,58 0,45 28 2 28,0 26,6 0,03 +0,03 27,695 27,705 47 13 2 0,58 0,45 40 2,5 40,0 38,2 0,03 +0,
44、04 39,595 39,605 60 16 2,5 0,7 0,55 35 2,74 35,4 32,9 0,03 +0,03 34,495 34,505 55 16 2,74 0,50,5 45 2,74 45,4 42,9 0,03 +0,04 44,495 44,505 65 16 2,74 0,5 0,5 BUT Calibre Entre: Contrle des dimensions maximales du filetage dune douille. Calibre Nentre pas: Contrle du minimum du diamtre suprieur d du
45、 filetage mle. ESSAI Calibre Entre: Il doit tre possible de visser doucement la douille dans le calibre. Calibre Nentre pas: Lorsque lextrmit chanfreine du calibre est place sur le filetage de la douille, le poids du calibre ne doit pas lui permettre de glisser sur le filetage MATIRE: Acier. Les par
46、ties exposes lusure doivent tre trempes. PURPOSE “Go“ gauge: Control of the maximum dimensions of the screw threads of a lampholder. “Not Go“ gauge: Control of the minimum major diameter d of the male screw thread. TESTING “Go gauge: It shall be possible to smoothly screw the lampholder into the gau
47、ge. “Not Go“ gauge: When the chamfered end of the gauge is placed over the screw thread, the weight of the gauge shall not allow it to pass over the thread. MATERIAL: Steel. Parts exposed to wear shall be hardened. Filetage 20,8 2 et 28 2 et 40 2,5 Thread 20,8 2 and 28 2 and 40 2,5 Filetage 35 2,74
48、et 45 2,74 Thread 35 2,74 or 45 2,74 BS EN 60399:2004+A1:2008 EN 60399:2004+A1:2008 Page 8 1)Undated reference. 2)Valid edition at date of issue. 3)To be ratified. Annex ZA (normative) Normative references to international publications with their corresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendmen
