1、BSI Standards PublicationLamps for road vehicles Dimensional, electrical and luminous requirementsBS EN 60809:2015National forewordThis British Standard is the UK implementation of EN 60809:2015. It is identical to IEC 60809:2014. It supersedes BS EN 60809:1996+A5:2012, which is withdrawn.The UK par
2、ticipation in its preparation was entrusted by TechnicalCommittee CPL/34, Lamps and Related Equipment, to SubcommitteeCPL/34/1, Electric lamps.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessa
3、ry provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2015.Published by BSI Standards Limited 2015ISBN 978 0 580 80032 0ICS 29.140.20; 43.040.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Stan
4、dard was published under the authority of theStandards Policy and Strategy Committee on 31 March 2015.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 60809:2015EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 60809 March 2015 ICS 43.040.20; 29.140.20 Supersedes
5、 EN 60809:1996 English Version Lamps for road vehicles - Dimensional, electrical and luminous requirements (IEC 60809:2014) Lampes pour vhicules routiers - Exigencesdimensionnelles, lectriques et lumineuses (IEC 60809:2014) Lampen fr Straenfahrzeuge - Mae, elektrische undlichttechnische Anforderunge
6、n (IEC 60809:2014) This European Standard was approved by CENELEC on 2015-01-20. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists a
7、nd bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under
8、 the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Eston
9、ia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee f
10、or Electrotechnical Standardization Comit Europen de Normalisation ElectrotechniqueEuropisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Mem
11、bers. Ref. No. EN 60809:2015 E EN 60809:2015 - 2 - Foreword The text of document 34A/1798/FDIS, future edition 3 of IEC 60809, prepared by SC 34A “Lamps“, of IEC/TC 34 “Lamps and related equipment“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60809:2015. The following
12、 dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2015-10-20 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2018-01-20 This documen
13、t supersedes EN 60809:1996. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard
14、IEC 60809:2014 was approved by CENELEC as a European Standard without any modification. BS EN 60809:201- 3 - EN 60809:2015 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normativ
15、ely referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by com
16、mon modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60050 series International electrotechnical vocabulary - - I
17、EC 60051-1 - Direct acting indicating analogue electrical measuring instruments and their accessories - Part 1: Definitions and general requirements common to all parts EN 60051-1 - IEC 60061-1 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: La
18、mp caps EN 60061-1 - IEC 60810 2014 Lamps for road vehicles - Performance requirements EN 60810 2015 IEC 60983 - Miniature lamps EN 60983 - IEC 62504 - General lighting - Light emitting diode (LED) products and related equipment - Terms and definitions EN 62504 - CIE 15 2004 Colorimetry - - UNECE 19
19、58 Agreement - Agreement concerning the adoption of uniform technical prescription for wheeled vehicles, equipment and parts which can be fitted and/or be used on wheeled vehicles and the conditions for reciprocal recognition of approvals granted on the basis of these prescriptions - - UNECE 4 - 195
20、8 Agreement, Addendum 3: Regulation No. 4: Uniform provisions concerning the approval of devices for the illumination of rear registration plates of power-driven vehicles and their trailers - - UNECE 6 - 1958 Agreement, Addendum 5: Regulation No. 6: Uniform provisions concerning the approval of dire
21、ction indicators for power-driven vehicles and their trailers - - BS EN 60809:201EN 60809:2015 - 4 - Publication Year Title EN/HD Year UNECE 7 - 1958 Agreement, Addendum 6: Regulation No. 7: Uniform provisions concerning the approval of front and rear position lamps, stop-lamps and end-outline marke
22、r lamps for motor vehicles (except motor cycles) and their trailers - - UNECE 23 - 1958 Agreement, Addendum 22: Regulation No. 23: Uniform provisions concerning the approval of reversing and manoeuvring lamps for power-driven vehicles and their trailers - - UNECE 37 - 1958 Agreement, Addendum 36: Re
23、gulation No. 37: Uniform provisions concerning the approval of filament lamps for use in approved lamp units of power-driven vehicles and of their trailers - - UNECE 38 - 1958 Agreement, Addendum 37: Regulation No. 38: Uniform provisions concerning the approval of rear fog lamps for power-driven veh
24、icles and their trailers - - UNECE 50 - 1958 Agreement, Addendum 49: Regulation No. 50: Uniform provisions concerning the approval of front position lamps, rear position lamps, stop lamps, direction indicators and rear-registration-plate illuminating devices for vehicles of category L - - UNECE 77 -
25、 1958 Agreement, Addendum 76: Regulation No. 77: Uniform provisions concerning the approval of parking lamps for power-driven vehicles - - UNECE 87 - 1958 Agreement, Addendum 86: Regulation No. 87: Uniform provisions concerning the approval of daytime running lamps for power-driven vehicles - - UNEC
26、E 91 - 1958 Agreement, Addendum 90: Regulation No. 91: Uniform provisions concerning the approval of side-marker lamps for motor vehicles and their trailers - - UNECE 99 - 1958 Agreement, Addendum 98: Regulation No. 99: Uniform provisions concerning the approval of gas-discharge light sources for us
27、e in approved gas-discharge lamp units of power-driven vehicles - - UNECE 101 - 1958 Agreement, Addendum 100: Regulation No. 101: Uniform provisions concerning the approval of passenger cars powered by an internal combustion engine only, or powered by a hybrid electric power train with regard to the
28、 measurement of the emission of carbon dioxide and fuel consumption and/or the measurement of electric energy consumption and electric range, and of categories M1and N1vehicles powered by an electric power train only with regard to the measurement of electric energy consumption and electric range -
29、- UNECE 119 - 1958 Agreement, Addendum 118: Regulation No. 119: Uniform provisions concerning the approval of cornering lamps for power-driven vehicles - - UNECE 128 - 1958 Agreement, Addendum 127: Regulation No. 128: Uniform provisions concerning the approval of light emitting diode (LED) light sou
30、rces for use in approved lamp units on power-driven vehicles and their trailers - - BS EN 60809:201 2 IEC 60809:2014 IEC 2014 CONTENTS 1 Scope 9 2 Normative references . 9 3 Terms and definitions 11 4 Requirements and test conditions for filament lamps 14 4.1 General requirements 14 4.2 Lamp marking
31、 . 14 4.3 Bulbs 14 4.4 Colour . 15 4.4.1 Colour of light 15 4.4.2 Colour endurance 16 4.4.3 Coated bulb . 16 4.5 Lamp dimensions 16 4.6 Caps and bases 16 4.7 Initial electrical and luminous requirements . 17 4.8 Check on optical quality. 17 4.8.1 General . 17 4.8.2 12 V lamps emitting white light .
32、17 4.8.3 6 V and 24 V lamps emitting white light 17 4.8.4 Lamps emitting selective-yellow light 17 4.9 UV radiation 18 4.10 Standard (talon) filament lamps . 18 4.11 Non-replaceable filament lamps 18 4.11.1 General . 18 4.11.2 Fixation 19 4.11.3 Lifetime . 19 4.11.4 Colour endurance 20 4.11.5 Lumino
33、us flux and colour maintenance . 20 4.11.6 Vibration and shock resistance . 20 5 Requirements and test conditions for discharge lamps . 21 5.1 General requirements 21 5.2 Lamp marking . 21 5.3 Bulbs 21 5.4 Caps . 21 5.5 Position and dimensions of electrodes, arc and black stripes . 22 5.5.1 Measurem
34、ents . 22 5.5.2 Electrodes . 22 5.5.3 Arc 22 5.5.4 Black stripes 22 5.6 Starting, run-up and hot-restrike characteristics . 22 5.6.1 Starting 22 5.6.2 Run-up 22 5.6.3 Hot-restrike 23 5.6.4 Compliance 23 5.7 Electrical and photometric characteristics 23 5.7.1 Voltage and wattage 23 BS EN 60809:201IEC
35、 60809:2014 IEC 2014 3 5.7.2 Luminous flux 23 5.7.3 Compliance 23 5.8 Colour . 23 5.9 UV radiation 24 5.10 Standard (talon) discharge lamps 25 6 Requirements and test conditions for LED light sources . 25 6.1 General requirements 25 6.2 Light source marking . 25 6.3 Optical surfaces 26 6.4 Colour of
36、 light . 26 6.5 Lamp dimensions 26 6.6 Caps and bases 26 6.7 Initial electrical and photometrical requirements. 26 6.8 Red content 26 6.9 UV radiation 26 6.10 Standard (talon) light sources 26 7 Sampling and conditions of compliance 27 8 Lamp data sheets 27 8.1 General . 27 8.2 List of specific lamp
37、 types . 27 Annex A (normative) Filament shape, length and position . 51 A.1 General . 51 A.2 Filaments shown as points 51 A.3 Line filaments 51 A.4 Coiled-coil filaments 51 A.5 Extreme filament turns 51 A.6 Filament extremities 51 A.6.1 General . 51 A.6.2 Axial filaments . 51 A.6.3 Transverse filam
38、ents 51 A.7 Determination of filament length 52 A.8 Filament offsets 52 A.9 Lateral deviation 52 A.10 Filament location check system (box system) 52 Annex B (normative) Measurement method of the colour of filament lamps . 55 B.1 General . 55 B.2 Colour . 55 B.3 Measuring directions . 55 B.3.1 Genera
39、l . 55 B.3.2 Filament lamps used in headlamps 55 B.3.3 Filament lamps used in light signalling devices . 56 Annex C (normative) Test conditions for electrical and luminous characteristics 57 C.1 Filament lamps 57 C.1.1 Ageing . 57 C.1.2 Test conditions 57 C.1.3 Electrical instrumentation . 57 C.1.4
40、Photometry 57 C.2 LED light sources 57 BS EN 60809:201 4 IEC 60809:2014 IEC 2014 C.2.1 Test conditions 57 C.2.2 Luminous flux 57 C.2.3 Normalized luminous intensity 58 C.2.4 Colour 58 C.2.5 Power consumption 58 Annex D (normative) Method of measuring internal elements of R2 lamps 59 D.1 General test
41、 conditions 59 D.1.1 Measurement position 59 D.1.2 Ageing . 59 D.1.3 Test condition 59 D.2 Reference axis, reference plane and planes for measurements . 59 D.2.1 Reference axis . 59 D.2.2 Reference plane 59 D.2.3 Plane V-V 59 D.2.4 Plane H-H 59 D.2.5 Plane X-X 59 D.2.6 Plane Y1-Y1 . 59 D.2.7 Plane Y
42、2-Y2 . 59 D.3 Viewing directions (see Figure D.1) . 60 D.3.1 Viewing direction 60 D.3.2 Viewing direction 60 D.3.3 Viewing direction 60 D.4 Measuring points (MP) 60 D.5 Dimensions to be measured 61 Annex E (normative) Method of measuring internal elements of H4 and HS1 lamps 64 E.1 General test cond
43、itions 64 E.1.1 Measurement position 64 E.1.2 Ageing . 64 E.1.3 Test condition 64 E.2 Reference axis, reference plane and planes for measurements . 64 E.2.1 Reference axis . 64 E.2.2 Reference plane 64 E.2.3 Plane V-V 64 E.2.4 Plane H-H 64 E.2.5 Plane X-X 64 E.2.6 Plane Y1-Y1 . 64 E.2.7 Plane Y2-Y2
44、. 65 E.2.8 Plane Y3-Y3 . 65 E.2.9 Plane Y4-Y4 . 65 E.2.10 Plane Y5-Y5 . 65 E.3 Viewing directions (see Figure E.1) . 65 E.3.1 Viewing direction 65 E.3.2 Viewing direction 65 E.3.3 Viewing direction 65 E.4 Measuring points (MP) 65 E.4.1 Shield and filaments (see Figure E.2) . 65 E.4.2 Top obscuration
45、 (see Figure E.3) . 66 E.5 Dimensions to be measured 66 Annex F (normative) Method of measuring internal elements of HB1 lamps. 70 BS EN 60809:201IEC 60809:2014 IEC 2014 5 F.1 General test conditions 70 F.1.1 Measurement position 70 F.1.2 Ageing . 70 F.1.3 Test condition 70 F.2 Dipped beam filament
46、location . 70 F.2.1 Horizontal location . 70 F.2.2 Vertical location . 70 F.2.3 Axial location . 70 F.3 Main beam filament location 70 F.3.1 Horizontal location . 70 F.3.2 Vertical location . 70 F.3.3 Axial location . 71 Annex G (informative) Optical set-up for the measurement of the position and fo
47、rm of the arc and of the position of the electrodes of discharge lamps 72 Annex H (normative) Measurement method of electrical and photometric characteristics of discharge lamps 73 H.1 General . 73 H.2 Ballast. 73 H.3 Burning position 73 H.4 Ageing 73 H.5 Supply voltage. 73 H.6 Starting test 73 H.7
48、Run-up test . 73 H.8 Hot restrike test 74 H.9 Electrical and photometric test. 74 H.10 Colour . 74 Annex I (informative) Overview of lamp types and their applications 75 Annex J (normative) Test conditions for colour endurance measurements 77 J.1 General . 77 J.2 Calibration and ageing. 77 J.3 Test
49、voltage 78 J.4 Operating position . 78 J.5 Test rack . 78 J.6 Operating cycles . 78 J.7 Closure . 81 Figure A.1 Determination of apexes, filament length and filament offsets (A and B) 53 Figure A.2 Determination of filament centre . 53 Figure A.3 Determination of lateral deviations (A and B) and tolerance on the light centre length (C) . 54 Figure B.1 Positions of the colorimetric receiver when measuring lamps used in headlamps 56 Figure B.2 Positions of the colori
