ETSI ETS 300 001 CHP 10-1997 Attachments to Public Switched Telephone Network (PSTN) General Technical Requirements for Equipment Connected to an Analogue Subscriber Interface in t.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D2989-2001(2011) Standard Test Method for Acidity-Alkalinity of Halogenated Organic Solvents and Their Admixtures《卤化有机溶剂及其添加剂酸碱度的标准试验方法》.pdf

ASTM D2989-2001(2016) Standard Test Method for Acidity-Alkalinity of Halogenated Organic Solvents and Their Admixtures《卤化有机溶剂及其添加剂酸碱度的标准试验方法》.pdf

ASTM D2990-2001 Standard Test Methods for Tensile Compressive and Flexural Creep and Creep-Rupture of Plastics《塑料的拉伸、压缩、弯曲蠕变及蠕变断裂的标准试验方法》.pdf

ASTM D2990-2009 Standard Test Methods for Tensile Compressive and Flexural Creep and Creep-Rupture of Plastics《塑料的张力、压力和柔性蠕变以及蠕变断裂的标准试验方法》.pdf

ASTM D2990-2017 Standard Test Methods for Tensile Compressive and Flexural Creep and Creep-Rupture of Plastics 《塑料拉伸 压缩和弯曲蠕变和蠕变断裂的标准试验方法》.pdf

ASTM D2992-2006 Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings《玻璃纤维(增强的热固树脂玻璃纤.pdf

ASTM D2992-2012 Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for &ldquo Fiberglass&rdquo (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings《玻璃纤维.pdf

ASTM D2992-2018 Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for &x201c Fiberglass&x201d (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings.pdf

ASTM D2995-1999(2004) Standard Practice for Estimating Application Rate of Bituminous Distributors《测定沥青洒布机的使用速率的标准实施规程》.pdf