1、 ETSI TS 132 102 V14.0.0 (2017-04) Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); LTE; Telecommunication management; Architecture (3GPP TS 32.102 version 14.0.0 Release 14) TECHNICAL SPECIFICATION ETSI ETSI TS 132 102 V14.0.0 (2017-04)
2、13GPP TS 32.102 version 14.0.0 Release 14Reference RTS/TSGS-0532102ve00 Keywords GSM,LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfec
3、ture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be
4、modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretaria
5、t. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, pleas
6、e send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permi
7、ssion of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand th
8、e ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members GSM and the GSM logo are Trade Marks regist
9、ered and owned by the GSM Association. ETSI ETSI TS 132 102 V14.0.0 (2017-04)23GPP TS 32.102 version 14.0.0 Release 14Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if an
10、y, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available o
11、n the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or m
12、ay be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identitie
13、s. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “shou
14、ld not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS
15、 132 102 V14.0.0 (2017-04)33GPP TS 32.102 version 14.0.0 Release 14Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 5g31 Scope 6g32 References 6g33 Definitions and abbreviations . 7g33.1 Definitions 7g33.2 Abbreviations . 9g34 General . 11g34.1 PLMN Teleco
16、m Management 11g34.1.1 3GPP Reference Model 11g34.1.2 3GPP Provisioning Entities 11g34.1.3 Management Infrastructure of the PLMN . 12g34.2 TMN . 12g34.3 Management of Next Generation Networks . 12g35 General view of PLMN Management Physical architectures 13g36 Basic objectives for PLMN Management Ph
17、ysical Architecture . 14g37 TM Architectural aspects . 15g37.1 Architectural relationship . 15g37.2 Architectural constraints . 16g37.3 Interoperability . 17g37.3.1 Introduction. 17g37.3.2 Interfaces. 17g37.3.3 Entities of a 3GPP system . 19g37.3.4 Open systems approach 21g37.3.5 Level of openness .
18、 21g37.3.6 Closed interfaces. 21g37.4 Data communication networks . 22g37.5 New technologies . 23g38 3GPP Management Physical architectures . 24g38.1 Compliance Conditions 24g38.2 Network Element (NE) management architecture 25g38.3 Subnetwork Management Architecture 27g38.4 Operations Systems inter
19、operability architecture . 28g38.5 Operations Systems intra-operability architecture 29g38.6 Enterprise management System interconnection architecture 30g39 TMN applications . 31g39.1 Management function blocks . 31g39.2 Management physical blocks . 32g39.3 IRP concept enabling TMN applications 33g3
20、10 Void 34g311 Implementation aspects 34g312 3GPP TMN Conformance 35g313 TMN planning and design considerations 36g313.1 Function attributes 36g313.2 Functional characteristics . 37g313.3 Critical attributes 37g3ETSI ETSI TS 132 102 V14.0.0 (2017-04)43GPP TS 32.102 version 14.0.0 Release 1413.4 Prot
21、ocol selection . 37g313.5 Communications considerations . 37g314 Mediation/Integration . 38g3Annex A (informative): Technology considerations 40g3A.1 Management physical blocks . 40g3A.1.1 Operations System (OS) . 40g3A.1.2 Void 40g3A.1.3 Void 40g3A.1.4 Void 40g3A.1.5 Void 40g3A.1.6 Void 40g3A.1.7 V
22、oid 40g3A.1.8 Network Element (NE) . 40g3A.1.9 Data Communication Network (DCN) . 41g3A.1.9.1 Transformation . 41g3A.1.9.1.1 Adaptation device . 41g3A.1.9.1.2 Mediation device . 41g3A.1.9.2 Distributed multi-element structure 41g3A.1.10 Management logical layered architecture within the management p
23、hysical view 42g3A.1.11 Interface concept 42g3A.2 Standard interfaces . 42g3Annex B (informative): Overview of a 3GPP System 44g3Annex C (informative): Change history . 45g3History 46g3ETSI ETSI TS 132 102 V14.0.0 (2017-04)53GPP TS 32.102 version 14.0.0 Release 14Foreword This Technical Specificatio
24、n (TS) has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG wit
25、h an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for
26、all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 132 102 V14.0.0 (2017-04)63GPP TS 32.102 version 14.0.0 Release 141 Scope The present document identifie
27、s and standardises the most important and strategic contexts in the physical architecture for the management of PLMNs. It serves as a framework to help define a telecom management physical architecture for a planned PLMN and to adopt standards and provide products that are easy to integrate. The req
28、uirements identified in the present document are applicable to all further development of 3GPP Telecom Management specifications as well as the development of PLMN Management products. The present document can be seen as guidance for the development of all other Technical Specification addressing th
29、e management of PLMNs, except TS 32.101 2. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. - References are either specific (identified by date of publication, edition number, version number, etc.) or non-s
30、pecific. - For a specific reference, subsequent revisions do not apply. - For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same
31、Release as the present document. 1 ITU-T Recommendation M.3010 (2000): “Principles for a Telecommunications management network“. 2 3GPP TS 32.101: “Telecommunication management; Principles and high level requirements“. 3 Void. 4 ITU-T Recommendation X.200 (1994): “Information technology - Open Syste
32、ms Interconnection - Basic Reference Model: The basic model“. 5 3GPP TS 32.150: “Telecommunication management; Integration Reference Point (IRP) Concept and definitions“. 6 Void. 7 Void. 8 Void. 9 TMF GB910: “Smart TMN Telecom Operations Map (Release 2.1)“. http:/www.tmforum.org 10 TMF GB909: “Smart
33、 TMN Technology Integration Map (Issue 1.1)“. http:/www.tmforum.org 11 ITU-T Recommendation M.3013 (2000): “Considerations for a telecommunications management network“. 12 3GPP TS 23.002: “Network architecture“. 13 3GPP TS 23.101: “General UMTS Architecture“. 14 3GPP TS 32.111-x: “Telecommunication
34、management; Fault Management;“. 15 OMG: “Unified Modelling Language Specification, Version 1.4, September 2001“. http:/www.omg.org/technology/documents/formal/uml.htm 16 ITU-T Recommendation M.3060/Y.2401 (2006): “ Principles for the Management of Next Generation Networks“ . ETSI ETSI TS 132 102 V14
35、.0.0 (2017-04)73GPP TS 32.102 version 14.0.0 Release 1417 ETSI TS 188 001 V1.2.1 TISPAN; “NGN management; Operations Support Systems Architecture“. 18 ITU-T Recommendation Y.2011 (2004), “General principles and general reference model for Next Generation Networks“. 19 ITU-T Recommendation Y.2001 (20
36、04), “General overview of NGN“. 20 ITU-T M.3050.x series (2004),“TMN Enhanced Telecom Operations Map (eTOM)“. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the following definitions apply: architecture: organisational structure of a system or component, th
37、eir relationships, and the principles and guidelines governing their design and evolution over time closed interfaces: privately controlled system/subsystem boundary descriptions that are not disclosed to the public or are unique to a single supplier de facto standard: standard that is widely accept
38、ed and used but that lacks formal approval by a recognised standards organisation Information Service (IS): Defined in 3GPP TS 32.150 5.interface standard: standard that specifies the physical or functional interface characteristics of systems, subsystems, equipment, assemblies, components, items or
39、 parts to permit interchangeability, interconnection, interoperability, compatibility, or communications interoperability: ability of two or more systems or components to exchange data and use information intra-operability: ability to interchange and use information, functions and services among com
40、ponents within a system Integration Reference Point (IRP): Defined in 3GPP TS 32.150 5. Managed Object: Defined in 3GPP TS 32.150 5. management infrastructure: Defined in TS 32.101 2. market acceptance: means that an item has been accepted in the market as evidenced by annual sales, length of time a
41、vailable for sale, and after-sale support capability. modular: pertaining to the design concept in which interchangeable units are employed to create a functional end product. module: interchangeable item that contains components. In computer programming, a program unit that is discrete and identifi
42、able with respect to compiling, combining with other modules, and loading is called a module. Network Resource Model (NRM): Defined in 3GPP TS 32.150 5. Next Generation Networks Management (NGNM): Planning, provisioning, installation, maintenance, operation and administration of next generation tele
43、communications equipment for transmission or control of resources and services within NGN transport and service strata. NGNM is defined by ITU-T 16. NGN service stratum: that part of the NGN which provides the user functions that transfer service-related data and the functions that control and manag
44、e service resources and network services to enable user services and applications. NGN transport stratum: that part of the NGN which provides the user functions that transfer data and the functions that control and manage transport resources to carry such data between terminating entities. open spec
45、ifications: public specifications that are maintained by an open, public consensus process to accommodate new technologies over time and that are consistent with international standards ETSI ETSI TS 132 102 V14.0.0 (2017-04)83GPP TS 32.102 version 14.0.0 Release 14open standards: widely accepted and
46、 supported standards set by recognised standards organisation or the commercial market place. These standards support interoperability, portability, and scalability and are equally available to the general public at no cost or with a moderate license fee. open systems strategy: focuses on fielding s
47、uperior telecom capability more quickly and more affordably by using multiple suppliers and commercially supported practices, products, specifications, and standards, which are selected based on performance, cost, industry acceptance, long term availability and supportability, and upgrade potential.
48、 physical architecture: minimal set of rules governing the arrangement, interaction, and interdependence of the parts or elements whose purpose is to ensure that a conformant system satisfies a specified set of requirements. The physical architecture identifies the services, interfaces, standards, a
49、nd their relationships. It provides the technical guidelines for implementation of systems upon which engineering specifications are based and common building blocks are built. PLMN Organisation: see 3GPP TS 32.101 2. plug or LTE radio access network - one or more Core Networks; - one or more Intelligent Node Networks, service logic and mobility management, (IN, GSM .); - one or more transmission networks (PDH, SDH etc) in various topologies (point-to-point, ring, point-to-multipoint etc) and physical means (radio, fi
