1、 ENGINEERING MATERIAL SPECIFICATION Material Name Specification Number Date Action Revisions 2008 12 08 N-STATUS No Replacement L. Schmalz, FNA / M. Montgomery, FOE 2003 01 08 Activated N. J. Komatsu Printed copies are uncontrolled Page 1 of 2 Copyright 2008, Ford Global Technologies, Inc. FABRIC, M
2、ONET PATTERN, WOVEN JACQUARD, WSS-M1H922-A UNLAMINATED NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a woven jacquard polyester face fabric. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for the 2002 Mode
3、l Year. 3. REQUIREMENTS 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). In addition to the requirements listed herein, the fabric shall meet all requirements of WSS-
4、M8P18-A1/A2/A3/A4 as applicable. 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 10 % tolerance (ASTM D 3775) Warp 280 ends/10 cm Weft 252 picks/10 cm 3.2.2 Fabric Weight, range. (FLTM BN 106-01) 370 +/- 30g/m23.3 COMPOSITION (ASTM D 629) Fabric 100 % polyester ENGINEERING MATERIAL SPECIFICATION WSS
5、M1H922-A Page 2 of 2 Copyright 2008, Ford Global Technologies, Inc. 3.4 YARN CONSTRUCTION (ASTM D 1244) Warp 500 dtex f192 (Polyester, air texturised, round) Weft 833 dtex f192 (Polyester, air texturised, round) 667 dtex f144 (Polyester, air texturised, round) 3.5 METHOD OF DYEING Yarn, solution dy
6、ed or as approved by Materials Engineering 3.6 FINISHING OPERATIONS As approved by Materials Engineering 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that both materials defined in this specification and shipped to any one assembly plant will be produced by one supplier only.
