IS 1364 Pt 4-1992 Hexagon head bolts screws and nuts of product grade A and B Part 4 Hexagon thin nuts (chamfered) (Size range M1 6 to M64) (Third Revision).pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

EN ISO 21180-2013 en Light conveyor belts - Determination of the maximum tensile strength《轻型输送带 最大抗拉强度的测定》.pdf

EN ISO 21181-2013 en Light conveyor belts - Determination of the relaxed elastic modulus《轻型输送带 松弛弹性模量的测定》.pdf

EN ISO 21182-2013 en Light conveyor belts - Determination of the coefficient of friction《轻型输送带 摩擦系数的测定》.pdf

EN ISO 21183-1-2006 en Light conveyor belts - Part 1 Principal characteristics and applications《轻型传送带 第1部分 主要特征和应用 代替EN 873-1996 ISO 21183-1-2005》.pdf

EN ISO 21183-2-2006 en Light conveyor belts - Part 2 List of equivalent terms《轻型输送带 第2部分 等同术语表》.pdf

EN ISO 21187-2005 en Milk Quantitative determination of bacteriological quality Guidance for establishing and verifying a conversion relationship between routine method results and.pdf

EN ISO 21227-1-2003 en Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 1 General guidance《油漆和清漆 用光学成像法评价涂漆表面的缺陷 第1部分 一般指南 ISO 21227-1-2.pdf

EN ISO 21227-2-2006 en Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 2 Evaluation procedure for multiimpact stone-chipping test《色漆和清漆.pdf

EN ISO 21227-3-2007 en Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 3 Evaluation of delamination and corrosion around a scribe《涂料和清漆.pdf