JUS C A5 010-1991 Metaliic and other inorganic coatings General rules for stationarj outdoor exposure corroslon tests《金属覆层和无机覆层 静态室外腐蚀试验总则》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS 2SP 95-1974 Specification for elastomeric grommets (polychloroprene) for aerospace use《航空航天用弹性保护垫圈(氯丁橡胶)规范》.pdf

BS 2SP 96-1982 Specification for internal retaining rings (imperial sizes)《内卡环(英制尺寸)规范》.pdf

BS 2T 66-1980 Specification for 18 10 chromium-nickel corrosion-resisting steel tube (niobium stabilized 550 MPa) (weldable)《19 10铬-镍耐腐蚀钢管材规范(铌稳定的 550MPa)(可焊接)》.pdf

BS 2T 68-1980 Specification for cold drawn 18 10 chromium-nickel corrosion-resisting steel tube (niobium stabilized 800 MPa) (weldable)《冷拉18 10铬-镍耐腐蚀钢管材规范(铌稳定的 800MPa)(可焊接)》.pdf

BS 2TA 38-2009 Specification for bar for machining of titanium-aluminium-molybdenum-tin-silicon- carbon alloy (tensile strength 1250-1420 MPa) (limiting ruling section 25 mm)《钛-铝-钼.pdf

BS 2TA 39-2009 Specification for forging stock of titanium-aluminium-molybdenum-tin-silicon-carbon alloy (tensile strength 1250-1420 MPa) (limiting ruling section 25 mm)《钛铝钼锡硅碳合金锻坯.pdf

BS 2TA 40-2009 Specification for bar for machining of titanium- aluminium-molybdenum-tin-silicon-carbon alloy (tensile strength 1205-1375 MPa) (limiting ruling section over 25 mm u.pdf

BS 2TA 41-2009 Specification for forging stock of titanium- aluminium-molybdenum-tin-silicon-carbon alloy (tensile strength 1205-1375 MPa) (limiting ruling section over 25 mm up to.pdf

BS 2TA 42-2009 Specification for forgings of titanium-aluminium- molybdenum-tin-silicon-carbon alloy (tensile strength 1205-1375 MPa) (limiting ruling section over 25 mm up to and .pdf