MS 133 Pt B11-1999 Methods of test for paints and varnishes part b11 determination of soluble mercury content of the pigment portion of the paint and of the liquid portion of watertion.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD ESK-M2G299-A3-2009 ADHESIVE SEALER SYNTHETIC RUBBER HOT APPLIED 70 - 80 DEGREE C HEAT CURING TO BE USED WITH FORD WSS-M99P1111-A 《热固化70-80℃热施涂合成橡胶密封剂胶粘剂 与标准FORD WSS-M99P111.pdf

FORD ESK-M2G299-A4-2009 ADHESIVE SEALER SYNTHETIC RUBBER WARM APPLIED 30 - 60 DEGREE C HEAT CURING TO BE USED WITH FORD WSS-M99P1111-A 《热固化30-60℃热施涂合成橡胶密封剂胶粘剂 与标准FORD WSS-M99P11.pdf

FORD ESK-M2G299-A5-2009 ADHESIVE SEALER SYNTHETIC RUBBER WARM APPLIED 60 - 70 DEGREE C HEAT CURING TO BE USED WITH FORD WSS-M99P1111-A 《热固化60-70℃热施涂合成橡胶密封剂胶粘剂 与标准FORD WSS-M99P11.pdf

FORD ESK-M2G299-A6-2009 ADHESIVE SEALER SYNTHETIC RUBBER WARM APPLIED 60 - 70 DEGREE C HEAT CURING LONG TERM FLEXIBLE TO BE USED WITH FORD WSS-M99P1111-A 《能长期保持柔性的热固化60-70℃热施涂合成橡.pdf

FORD ESK-M2G318-A1-1988 ADHESIVE POLYESTER - HOT MELT《热熔聚酯胶粘剂》.pdf

FORD ESK-M2G340-A-2015 ADHESIVE POLYCHLOROPRENE CONTACT WATER DISPERSION AIR DRYING TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD ESK-M2G365-A1-2015 ADHESIVE POLYURETHANE TWO COMPONENT SOLVENT FREE METAL TO E-COATED METAL POLYOL PART TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD ESK-M2G365-A2-2015 ADHESIVE POLYURETHANE TWO COMPONENT SOLVENT FREE METAL TO E-COATED METAL ISOCYANATE COMPONENT TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD ESK-M2G367-A1-2015 ADHESIVE POLYURETHANE TWO COMPONENT WATER BORNE BASE MATERIAL TO BE USED WITH FORD WSS-M99P1111-A .pdf