MSZ 6500-1984 《平面模版种类内容以及主要尺寸》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSB-M2G383-A1-2016 TAPE ADHESIVE EPOXY BASED STRUCTURAL LOW-EXPANDING HIGH TEMPERATURE HEAT CURING WELDABLE FLOW WASH RESISTANT TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSB-M2G383-A2-2014 TAPE ADHESIVE EPOXY BASED STRUCTURAL MEDIUM-EXPANDING HIGH TEMPERATURE HEAT CURING WELDABLE FLOW WASH RESISTANT TO BE USED WITH FORD WSS-M99P1111-A (Shown.pdf

FORD WSB-M2G383-A2-2016 TAPE ADHESIVE EPOXY BASED STRUCTURAL MEDIUM-EXPANDING HIGH TEMPERATURE HEAT CURING WELDABLE FLOW WASH RESISTANT TO BE USED WITH FORD WSS-M99P1111-A (Shown.pdf

FORD WSB-M2G388-A-2011 ADHESIVE EPOXY WELDABLE THERMAL CURE STRUCTURAL TO BE USED WITH FORD WSS-M99P1111-A 《环氧的可焊接热固化结构粘合剂 与福特WSS-M99P1111-A 一起使用》.pdf

FORD WSB-M2G388-A-2016 ADHESIVE EPOXY WELDABLE THERMAL CURE STRUCTURAL TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSB-M2G55-C-2014 ADHESIVE SYNTHETIC RUBBER WATER DISPERSION FAST TACK TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSB-M2G57-C-2014 ADHESIVE WATER EMULSION LATEX BASE TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSB-M2P172-A-2008 PAINT PERFORMANCE PAINTED FIBERBOARD INTERIOR HIGH SUNLOAD AREAS TO BE USED WITH FORD WSS-M99P1111-A 《汽车内部的高太阳暴露区域的涂漆纤维板用油漆的性能 与标准FORD WSS-M99P1111-A一起使用 .pdf

FORD WSB-M3D169-A-2004 UNSATURATED POLYESTER (UP) 22% GLASS FIBER REINFORCED SHEET MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《22%玻璃纤维增强的不饱和聚酯（UP）片状成型料 与标准FORD WSS-M99.pdf