MSZ 16307-1969 《支票 检测邮票》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM E1303-1995(2017) 4375 Standard Practice for Refractive Index Detectors Used in Liquid Chromatography《液相色谱用折射率检测器的标准实施规程》.pdf

ASTM E1304-1997(2002) Standard Test Method for Plane-Strain (Chevron-Notch) Fracture Toughness of Metallic Materials《金属材料平面变形(V型槽口)断裂韧度的测试方法(代替SAE ARP 1704)》.pdf

ASTM E1304-1997(2008) 374 Standard Test Method for Plane-Strain (Chevron-Notch) Fracture Toughness of Metallic Materials.pdf

ASTM E1304-1997(2008)e1 488 Standard Test Method for Plane-Strain (Chevron-Notch) Fracture Toughness of Metallic Materials《金属材料水平变形断裂强度的标准试验方法》.pdf

ASTM E1304-1997(2014) 8360 Standard Test Method for Plane-Strain &40 Chevron-Notch&41 Fracture Toughness of Metallic Materials《金属材料平面变形 (V型槽口) 断裂韧度的标准试验方法》.pdf

ASTM E1306-2007 Standard Practice for Preparation of Metal and Alloy Samples by Electric Arc Remelting for the Determination of Chemical Composition《测定化学成分用电弧溶化法制备金属及合金式样的标准实施规程》.pdf

ASTM E1306-2011 7500 Standard Practice for Preparation of Metal and Alloy Samples by Electric Arc Remelting for the Determination of Chemical Composition《通过化学成分测定电弧重熔的金属及合金样品制备的标准操.pdf

ASTM E1306-2017 red 0625 Standard Practice for Preparation of Metal and Alloy Samples for Chemical Analysis by Electric Arc Remelting《采用电弧重熔法制备化学分析用金属和合金样品的标准实施规程》.pdf

ASTM E1307-2005 Standard Practice for Surface Preparation and Structural Adhesive Bonding of Precured Nonmetallic Composite Facings to Structural Core for Flat Shelter Panels《平面遮蔽板.pdf