MSZ KGST 280-1976 《钢铁用六角头螺丝以及六角螺丝设备用的准确性级》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN 28141-2003 Connecting flanges for vessels and process apparatus of non-alloy and stainless steel《非合金钢和不锈钢制容器和加工器具用连接法兰》.pdf

DIN 28145-1-1999 Parts welded to glass lined steel agitator vessels - Part 1 Support for baffle Form S for vessels nominal diameter 2400 to 3600 mm connecting dimensions interaktiv.pdf

DIN 28145-3-1993 Parts welded to glass lined agitator vessels position and size of lifting lugs《搪瓷搅拌容器用焊接件 挂吊耳的位置和尺寸》.pdf

DIN 28145-4-1993 Parts welded to glass lined agitator vessels support rings《搪瓷搅拌容器的焊接零件 支撑环》.pdf

DIN 28145-5-1995 Parts welded to glass lined steel agitator vessels - Part 5 Insulation collar at the bottom discharge opening《搪玻璃钢搅拌容器用焊接件 第5部分 底部泄料孔处绝缘接头》.pdf

DIN 28145-6-1979 Parts welded to glass lined agitator vessels bracket《玻璃纤维衬里搅拌容器用焊接件 第6部分 支架》.pdf

DIN 28145-8 Bb 1-1993 Parts welded to glass lined agitator vessels tubular and profile supports construction of supports《搪瓷搅拌容器的焊接件 管状和外形支座 支座的制造》.pdf

DIN 28145-8-1993 Parts welded to glass lined agitator vessels tubular and profile support《搪瓷搅拌容器的焊接件 管子和外形支座》.pdf

DIN 28146-1998 Glass lined steel baffles for agitator vessels - Mounting dimensions《搅拌容器用玻璃衬里的钢制隔板 安装尺寸》.pdf