NAVISTAR ESP S-41 101-GS-2015 VOID - Rubber Grommets - General Specifications (Noun Code - 4020).pdf

上传人:inwarn120 文档编号:962755 上传时间:2019-03-10 格式:PDF 页数:1 大小:91.13KB
下载 相关 举报
NAVISTAR ESP S-41 101-GS-2015 VOID - Rubber Grommets - General Specifications (Noun Code - 4020).pdf_第1页
第1页 / 共1页
亲,该文档总共1页,全部预览完了,如果喜欢就下载吧!
资源描述

1、This document is restricted and may not be sent outside Navistar, Inc. or reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2015 by Navistar, Inc. July 2015 Page 1 of 1 NAVISTAR, INC. Engineering Standard Parts NUMBER: ESP-S-41.1

2、01-GS TITLE: Rubber Grommets General Specifications (Noun Code 4020) CURRENT ISSUE DATE: July 2015 WRITTEN/REVIEWED BY: Corporate Technical Standards APPROVED BY: Corporate Technical Standards SUPERSEDES ISSUE OF: September 2000 PRINTED COPIES OF THIS DOCUMENT MUST BE VERIFIED FOR CURRENT REVISION Change Notice: Made VOID. This specification is VOID, and is replaced by MPAPS S-S-41.101-GS/PL. For questions, contact MaterialsEngineeringN VOID

展开阅读全文
相关资源
猜你喜欢
  • DIN 86292-2014 Ships and marine technolgy - Waste water treatment plants - Methods of sampling《船舶和海洋技术 污水处理厂 采样方法》.pdf DIN 86292-2014 Ships and marine technolgy - Waste water treatment plants - Methods of sampling《船舶和海洋技术 污水处理厂 采样方法》.pdf
  • DIN 86341-2000 Ships and marine technology - Loose flanges and welding necks extra light duty - Welding necks made from steel and stainless steel DN 32 to DN 50 up to PN 25 DN 65 t.pdf DIN 86341-2000 Ships and marine technology - Loose flanges and welding necks extra light duty - Welding necks made from steel and stainless steel DN 32 to DN 50 up to PN 25 DN 65 t.pdf
  • DIN 86501-2017 Screwed bonnet type valves of gun metal with 24 connection for Type W port according to DIN 3861《符合DIN 3861的与W出口端成24度连接的炮铜制螺纹帽状阀门》.pdf DIN 86501-2017 Screwed bonnet type valves of gun metal with 24 connection for Type W port according to DIN 3861《符合DIN 3861的与W出口端成24度连接的炮铜制螺纹帽状阀门》.pdf
  • DIN 86528-2017 Tab washers for screwed bonnet type valves《螺盖阀的锁紧垫圈》.pdf DIN 86528-2017 Tab washers for screwed bonnet type valves《螺盖阀的锁紧垫圈》.pdf
  • DIN 86552-2002 Valves screwed bonnet type of steel with 24-connection with port end W according to DIN 3861《符合DIN 3861的与W出口端成24度连接的钢制螺纹帽状阀门》.pdf DIN 86552-2002 Valves screwed bonnet type of steel with 24-connection with port end W according to DIN 3861《符合DIN 3861的与W出口端成24度连接的钢制螺纹帽状阀门》.pdf
  • DIN 86720-2002 Gate valves flat sided of gun metall with screwed bonnet and flanges DN 20 to DN 100 PN 16《带螺纹的阀帽和法兰DN 20 至 DN 100、PN 16 的炮铜制楔形滑门阀》.pdf DIN 86720-2002 Gate valves flat sided of gun metall with screwed bonnet and flanges DN 20 to DN 100 PN 16《带螺纹的阀帽和法兰DN 20 至 DN 100、PN 16 的炮铜制楔形滑门阀》.pdf
  • DIN 86735-2013 Oil-water separators - Tank system for bilge water on seagoing vessels《油水分离器 远洋轮上舱底污水的水槽系统》.pdf DIN 86735-2013 Oil-water separators - Tank system for bilge water on seagoing vessels《油水分离器 远洋轮上舱底污水的水槽系统》.pdf
  • DIN 87101-2003 Non-return flaps (storm valves) self-closing vertical type DN 50 up to DN 150 PN 1 - Mating dimensions for flanges according to PN 10《DN为50-150、标称压力为1的垂直自闭式止回阀(止回排水阀.pdf DIN 87101-2003 Non-return flaps (storm valves) self-closing vertical type DN 50 up to DN 150 PN 1 - Mating dimensions for flanges according to PN 10《DN为50-150、标称压力为1的垂直自闭式止回阀(止回排水阀.pdf
  • DIN 87151-2015 Grey cast-iron coarse filters - DN 40 to DN 200 nominal pressure PN 2 5 - Compilation and dimensions《灰铸铁粗滤器 公称内径40至200 公称压力2 5 编辑和尺寸》.pdf DIN 87151-2015 Grey cast-iron coarse filters - DN 40 to DN 200 nominal pressure PN 2 5 - Compilation and dimensions《灰铸铁粗滤器 公称内径40至200 公称压力2 5 编辑和尺寸》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1