1、- - MIL-Gl6751A (Wep) 26 i963 SUPERSEDING MIL-C-16751 (BuOrd) 13 March 1952 MILITARY SPECIFICATION COVERS, CANVAS (FOR NAVAL ORDNANCE EQUIPMENT) 1. SCOPE / 1.2 - Scope. This specification covers the manufacture of eanvas covers, and applies to all types and classes of covers intended for protection
2、of naval ordnance equipment. 1.2 - Classification. The canvas covers shall be one grade. 2. APPLICABLE DOCUMENTS 2.1 The following specifications, standards, drawings, and publi- cations form a part of this speciffcation. the issue in effect on date of invitation for bids shall apply: Unless otherwi
3、se specified, ! SPECIFICATIONS Federal KK-L-271 Leather, Strap, Cattlehide, Vegetable-Tanned V-T-276 Thread, Cotton CCC-C-419 Cloth, Cotton, Duck, Unbleached, Plied Yarns (Army a chain stitch is not acceptable. When skipped or broken stitches occur, the stitches must be reinforced by parallel stitch
4、ing for at least however, no hems are required on selvage edges, except as noted below. . - For round grommets 2.0 inch hem For oblong grommets 3.0 inch hem For brings 3.0 inch hem 3.9 - Handles. Handles, when required, shall be cotton webbing, Type III, of Specification MIL-W-530. 3.10 - Deviation
5、from Drawings, Sample Cover or Specifications, The contractor may at his option combine two or more of the parts on the drawings (or sample cover) or make one part into two or more parts to suit the width or cutting of the canvas, providing the original dimensions 3 - -. Provided by IHSNot for Resal
6、eNo reproduction or networking permitted without license from IHS-,-,-of the cover are maintained and providing that any new seams follow the pattern of the adjacent seams. received fr.om the contracting ectivity for any other deviations from the drawings or specifications. Except for this, permissi
7、on must be 3.11 - Color. Unless otherwise specified, the treated canvas shall be of the color specified in Specification CCGC-428, Type II. 3.12 - Marking. Each cover shall be suitably marked in letters not less than one inch high with the markings as shown on the drawing or sample cover. 3.13 - Dim
8、ensions. No dimensions of the finished cover shall be less than that on the drawings or sample cover. of the finished cover may be larger than the dimensions on the drawing or sample cover by the following amounts: However, the dimensions Dimensions on Drawings or Smle Covers o to ?,O inck1es More t
9、han 3, O to 1-2. inches Hore than 12.0 to 24.0 inches More than 24.0 inch36 Plus Tolerances on Finished Production Cover 3/8 inch 1/2 inch 3/4 inch 3 per cent Allowances for sbinkage shall be in the directions indicated on the drawings or pat.terns, Otherwise, the dimensions of the finished cover sh
10、ould be as close as possible to Lhe drawings or sample cover. grommets, bztm 1 a? commercial containers, so constructed as to insure acceptance ly /aocc.o: or other carriers, for safe transportation at the lowest rat tcJ tl2 point of delivery. These boxes or crates shall be ab1 e to withsta- storage
11、, rehandling and reshipment without the necessity of repacking. .il boxes shall fit the packages in a snug, tight-fitting manner. of hooks. The boxes shall be suitably labeled to caution against the use 5.3 - Marking. 5 Provided by IHSNot for ResaleNo reproduction or networking permitted without lic
12、ense from IHS-,-,-MIL-C-bb75LA LO W 7777706 0279056 2 W ._ m-C-i6751A( Wep) Unless otherwise specified, packages shall be marked with the name of the Ordnance Material for which the cover is designed, contract number or order number and the name of the contractor, Each container shall be marked “Can
13、vas covers“ and with the quantity contained therein, the name of the contractor, the number of the contract or order, and the gross weight. 5,3.1 - Packages, 5.3.2 - Shipping containers, 6, NOTES, 6.1 - Ordering data. Frocurement documents should specify the f oll.owin g : (a) Title, Number and Date
14、 of this specification. (b Applicable drawing number. NOTICE: When Government drawings, specifications, or other data are used for any purpose other than in connection with a definitely related Government procurement operation, the United States Government thereby incurs no responsibility nor any ob
15、ligation whatsoever, and the fact that the Government may have formulated, furnished, or in any way supplied the said drawings, specifications, or other data is not to be regarded by implications or otherwise as in any manner licensing the holder or any other person or corporation, or conveying any rights or permission to manufacture, use, or sell any patented invention that may in any way be related thereto, 6 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
