NBN C 73-335-1981 5625 《家电仪器，其类似仪器以及附属品，家电仪器及其类似仪器的安全，关于家用紫外线和红外线皮肤治疗器的特殊规定》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS ISO 18325-2015 Geosynthetics Test method for the determination of water discharge capacity for prefabricated vertical drains《土工合成材料 测定预制垂直排水管排水能力的试验方法》.pdf

BS ISO 18329-2004 Milk and milk products - Determination of furosine content - Ion-pair reverse-phase high-performance liquid chromatography method《乳和乳制品 furosine含量的测定 离子对反相高效液相色谱法.pdf

BS ISO 18333-2014 Pallets for materials handling Quality of new wooden components for flat pallets《物料装卸用托盘 平板托盘用新木制部件的质量》.pdf

BS ISO 18334-2010 Pallets for materials handling - Quality of assembly of new wooden pallets《物料运输用托盘 新木制托盘的组装质量》.pdf

BS ISO 18337-2015 Surface chemical analysis Surface characterization Measurement of the lateral resolution of a confocal fluorescence microscope《表面化学分析 表面特征 共焦荧光显微镜横向分辨率的测量》.pdf

BS ISO 18338-2015 Metallic materials Torsion test at ambient temperature《金属材料 环境温度下的扭转试验》.pdf

BS ISO 18352-2009 Carbon-fibre-reinforced plastics - Determination of compression-after-impact properties at a specified impact-energy level《碳纤维增强塑料 规定冲击能量级上的冲击后压缩强度性能的测定》.pdf

BS ISO 18362-2016 Manufacture of cell-based health care products Control of microbial risks during processing《基于细胞的健康护理产品的制造 加工过程中的微生物风险控制》.pdf

BS ISO 18363-1-2015 Animal and vegetable fats and oils Determination of fatty-acid-bound chloropropanediols (MCPDs) and glycidol by GC MS Method using fast alkaline transesterifica .pdf