NBN EN 747-1-1993 5625 Furniture - Bunk beds for domestic use - Part 1 Safety requirements《家具 家用折叠床 第1部分：安全要求》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 16229-1981 Double angle disk cutter with inserted blades for machining light alloys Design and dimensions《加工轻合金用镶高速钢刀片双面刃圆盘铣刀 结构及尺寸》.pdf

GOST 1623-1989 Gauges for inch thread with 55 corner profile Tolerances《55度角侧面英制螺纹规 公差》.pdf

GOST 16230-1981 Cut off cutters for machining light alloys Desigt and dimensions《轻合金加工用切断铰刀 设计和尺寸规格》.pdf

GOST 16231-1981 Shank radius cutters with tapered shank for machining light alloys Design and dimensions《轻合金加工用带锥形钎尾半径铣刀 设计和尺寸规格》.pdf

GOST 16234-1970 Turn-out chill mould Basic dimensions《切断冷硬铸模 基本尺寸规格》.pdf

GOST 16235-1970 Folding chill moulds Basic dimensions《折叠冷硬铸模 基本尺寸规格》.pdf

GOST 16236-1970 Chill moulds with parallel joint Basic dimensions《带平行分型金属铸型(硬模) 基本尺寸》.pdf

GOST 16237-1970 Chill moulds Thickness of walls《冷硬铸模 壁厚》.pdf

GOST 16238-1970 Chill moulds Ribs of rigidity Dimensions《金属铸型(硬模) 加强筋尺寸》.pdf