NEN-ISO 7965-1-1993 Packaging Sacks Drop test Part 1 Paper sacks (ISO 7965-1 1984)《ISO 7965-1-1984 包装 袋 跌落检验 第1部分：纸袋》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN 46202-1987 Terminal studs for switchgear and controlgear instrument transformers and surge arresters of 52 kV and above《52KV 和其以上的转换装置、控制装置、仪表传感器和电涌放电器的端子连接螺桩》.pdf

DIN 46206-2-1971 Supply-terminals for electrical equipment 40 A connections with rectangular cross-section basic dimensions and coordination《电气设备大于或等于 40 A 的电源连接 第2部分 基本尺寸和配位》.pdf

DIN 46206-3-1983 Terminals for electrical equipment flat terminals for equipment from and above 52 kV basic dimensions coordination《电气设备的终端 52kV以上设备的扁平接线端子 基本尺寸和协调》.pdf

DIN 4621-1995 Laminated leaf springs - Alignment clips《叠板弹簧 校直弹簧夹》.pdf

DIN 46211-1965 Stamped Cable Sockets for Copper Conductors《铜导体用的冲压电缆端头》.pdf

DIN 46215-1976 Stamped solder lugs with hole《带孔压制焊片》.pdf

DIN 46216-1976 Stamped solder lugs with slot《带槽的冲压焊片》.pdf

DIN 46218-1966 Stamped metal rings for conductors《导线用冲压金属环 》.pdf

DIN 46220-1965 Cable sockets hot pressed cast for copper conductors《铜导线用热压制的、铸塑的电缆端头》.pdf