NF P15-318-2006 Hydraulic binders - Cement with limited sulphides content for use in prestressed concrete 《水硬性黏合剂 预应力混凝土用硫化物含量有限的混凝土》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 21139-1987 Industrial high-frequency generators and units for inducted and dyelectric heating General specifications《用于感应加热和电介质加热的工业高频发生器和装置一般技术条件》.pdf

GOST 21140-1988 Package System of dimensions《容器 尺寸体系》.pdf

GOST 21141-1984 Roller mechanisms for strip feeding maximum width 125 mm Basic and coupling dimensions《宽 125mm条材送料用圆辊机具 基本及连接尺寸》.pdf

GOST 21142-1984 Roller mechanisms for strip feeding width from 200 to 560 mm Basic and coupling dimensions《宽 560mm条材送料用圆辊机具 基本及连接尺寸》.pdf

GOST 21143-1984 Roller-wedge mechanisms for strip feeding maximum width 125 mm Basic and coupling dimensions《宽 125mm条材送料用滚柱机形机具 基本及连接尺寸》.pdf

GOST 21144-1984 Wedge-blade mechanisms for strip feeding maximum width 125 mm Basic and coupling dimensions《宽 125mm条材送料用楔形刀式机具 基本及连接尺寸》.pdf

GOST 21145-1984 Tong-gripper mechanisms for strip feeding maximum width 50 mm Basic and coupling dimensions《宽 50mm条材送料用钳式机具 基本及连接尺寸》.pdf

GOST 21146-1984 Tong-gripper mechanisms for feeding strip max Width 71 mm Basic and coupling dimensions《宽 71mm条材送料用钳式机具 基本及连接尺寸》.pdf

GOST 21147-1984 Strip cleaning devices Basic and coupling dimensions《条材清洗装置 基本及连接尺寸》.pdf