ONORM ISO 1302-1982 Technical drawings Methods of indicating surface texture on drawings Dessins techniques Indication des etats de surface sur les dessins 《技术制图 图纸内表面硬度说明》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN ISO 1095-1994 Shipbuilding and marine structures toughened safety glass panes for ships- side scuttles identical with ISO 1095 1989《造船和海上结构 侧舷窗用钢化安全玻璃板》.pdf

DIN ISO 10958-1-1999 Snowboards - Binding mounting area - Part 1 Requirements and test methods for snowboards without inserts (ISO 10958-1 1998)《滑雪板 捆绑固定区 第1部分 非插入式滑雪板的要求和试验方法》.pdf

DIN ISO 10958-2-2016 Snowboards - Binding mounting area - Part 2 Requirements and test methods for snowboards with inserts (ISO 10958-2 2015)《滑雪板 捆绑安装区 第2部分 刀片式滑雪板的要求和试验方法(ISO 1095.pdf

DIN ISO 10985-2009 Caps made of aluminium-plastics combinations for infusion bottles and injection vials - Requirements and test methods (ISO 10985 2009)《输液瓶和注射管用铝 塑合成盖 要求和测试方法(ISO.pdf

DIN ISO 11-1997 Aircraft - Ground pressure testing connections for pressure cabins (ISO 11 1987)《飞机 压力座舱地面压力试验连接装置》.pdf

DIN ISO 11009-2007 Petroleum products and lubricants - Determination of water washout characteristics of lubricating greases (ISO 11009 2000)《石油产品和润滑剂 润滑脂抗水洗性能的测定》.pdf

DIN ISO 11040-1-2017 Prefilled syringes - Part 1 Glass cylinders for dental local anaesthetic cartridges (ISO 11040-1 2015)《带药注射器 第1部分 齿科局部麻醉药筒用玻璃筒(ISO 11040-1-2015)》.pdf

DIN ISO 11040-2-2012 Prefilled syringes - Part 2 Plunger stoppers for dental local anaesthetic cartridges (ISO 11040-2 2011)《预灌封注射器 第2部分 牙科局部麻醉药筒柱塞螺旋帽 (ISO 11040-2-2011)》.pdf

DIN ISO 11040-3-2014 Prefilled syringes - Part 3 Seals for dental local anaesthetic cartridges (ISO 11040-3 2012)《预灌封注射器 第3部分 牙科局部麻醉药筒用铝盖 (ISO 11040-3-2012)》.pdf