REG NASA-LLIS-1863--2008 Lessons Learned - Model Based Design reduces hardware prototyping.pdf

上传人:bonesoil321 文档编号:1019328 上传时间:2019-03-21 格式:PDF 页数:2 大小:13.01KB
下载 相关 举报
REG NASA-LLIS-1863--2008 Lessons Learned - Model Based Design reduces hardware prototyping.pdf_第1页
第1页 / 共2页
REG NASA-LLIS-1863--2008 Lessons Learned - Model Based Design reduces hardware prototyping.pdf_第2页
第2页 / 共2页
亲,该文档总共2页,全部预览完了,如果喜欢就下载吧!
资源描述

1、Lessons Learned Entry: 1863Lesson Info:a71 Lesson Number: 1863a71 Submitting Organization: GRCa71 Submitted by: Dale Forcea71 POC Name: Dale Forcea71 POC Email: Dale.A.Forcenasa.gova71 POC Phone: 216-433-3520Subject: Model Based Design reduces hardware prototyping Abstract: By using computer models

2、of the traveling wave tube (TWT) and electronic power conditioner (EPC), the Lunar Reconnaissance Orbiter (LRO) traveling wave tube amplifier (TWTA) achieved first pass success.Description of Driving Event: NASA Glenn Research Center was a pioneer in the computer aided design of TWTs, and successful

3、ly transferred the technology to the commercial TWT industry and to DOD. The use of computer modeling allowed the LRO TWTA program to obtain two space qualified TWTAs with two TWT builds. In the Communication Technology Satellite program, done before any computer modeling was introduced, 32 builds w

4、ere needed before a successful TWTA was obtained.Lesson(s) Learned: Model Based Design allows first pass design success, saving time and money in obtaining hardware for NASA missions.Recommendation(s): Where computer models of hardware are available, they should be used in the design process. Where

5、they are not, development of such models is desirable.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Evidence of Recurrence Control Effectiveness: In developing the Ka-band TWT for the Cassini mission to Saturn, with computer modeling of TWTs in its

6、 infancy, the number of builds needed to produce a successful TWT was reduced to eight (from 32 with no computer modeling). With the current state of computer modeling, the first build was successful.Documents Related to Lesson: N/AMission Directorate(s): a71 Space Operationsa71 Sciencea71 Explorati

7、on Systemsa71 Aeronautics ResearchAdditional Key Phrase(s): a71 Engineering Design (Phase C/D).Spacecraft and Spacecraft InstrumentsAdditional Info: a71 Project: Lunar Reconnaissance Orbiter TWTAApproval Info: a71 Approval Date: 2008-09-26a71 Approval Name: mbella71 Approval Organization: HQProvided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-

展开阅读全文
相关资源
猜你喜欢
  • ASD-STAN PREN 2605-1987 Aerospace Series Straight Metric-Size Unions with Locking Ring 24 Degrees Union Interface Dimensions (Issue P 1)《航空航天系列 带锁紧环的直型公制规格连接器 24°30'连接器接口尺寸 第P1版》.pdf ASD-STAN PREN 2605-1987 Aerospace Series Straight Metric-Size Unions with Locking Ring 24 Degrees Union Interface Dimensions (Issue P 1)《航空航天系列 带锁紧环的直型公制规格连接器 24°30'连接器接口尺寸 第P1版》.pdf
  • ASD-STAN PREN 2606-2008 Aerospace series 60 degrees interface for adaptors threaded with lockring Geometric configuration (Edition P1)《航空航天系列 带锁环的有螺纹转接器用60°接口 几何形状 第P1版》.pdf ASD-STAN PREN 2606-2008 Aerospace series 60 degrees interface for adaptors threaded with lockring Geometric configuration (Edition P1)《航空航天系列 带锁环的有螺纹转接器用60°接口 几何形状 第P1版》.pdf
  • ASD-STAN PREN 2607-1987 Aerospace Series Straight Metric-Size Unions with Locking Ring Configuration O-Ring Dimensions (Issue P 1)《航空航天系列 带锁紧环的直型公制规格连接器 O形环形状 尺寸 第P1版》.pdf ASD-STAN PREN 2607-1987 Aerospace Series Straight Metric-Size Unions with Locking Ring Configuration O-Ring Dimensions (Issue P 1)《航空航天系列 带锁紧环的直型公制规格连接器 O形环形状 尺寸 第P1版》.pdf
  • ASD-STAN PREN 2608-1999 Aerospace Series Installation and Removal Requirements for 8 Degree 30' Adaptors Threaded with Lockring (Edition P 1)《航空航天系列 带锁环的有螺纹8°30'转接器的安装和拆卸要求 第P1版》.pdf ASD-STAN PREN 2608-1999 Aerospace Series Installation and Removal Requirements for 8 Degree 30' Adaptors Threaded with Lockring (Edition P 1)《航空航天系列 带锁环的有螺纹8°30'转接器的安装和拆卸要求 第P1版》.pdf
  • ASD-STAN PREN 2609-1985 Aerospace Series Turnbarrels Control Cable in Copper-Zinc Alloys Dimensions and Loads (Edition 1)《航空航天系列 铜-锌合金制控制索用旋转套筒 尺寸和负荷 第1版》.pdf ASD-STAN PREN 2609-1985 Aerospace Series Turnbarrels Control Cable in Copper-Zinc Alloys Dimensions and Loads (Edition 1)《航空航天系列 铜-锌合金制控制索用旋转套筒 尺寸和负荷 第1版》.pdf
  • ASD-STAN PREN 2615-1986 Aerospace Series Wire to Close Tolerance in Aluminium and Aluminium Alloys 1 6 Less Than or Equal to D Less Than or Equal to 9 6 mm Dimensions (Issue P 1)《航.pdf ASD-STAN PREN 2615-1986 Aerospace Series Wire to Close Tolerance in Aluminium and Aluminium Alloys 1 6 Less Than or Equal to D Less Than or Equal to 9 6 mm Dimensions (Issue P 1)《航.pdf
  • ASD-STAN PREN 2616-1986 Aerospace Series Wire for Rivets in Aluminium and Aluminium Alloys Large Tolerances D Less Than or Equal to 10 mm Dimensions (Issue P 1)《航空航天系列 D≤10mm的铝和铝合金.pdf ASD-STAN PREN 2616-1986 Aerospace Series Wire for Rivets in Aluminium and Aluminium Alloys Large Tolerances D Less Than or Equal to 10 mm Dimensions (Issue P 1)《航空航天系列 D≤10mm的铝和铝合金.pdf
  • ASD-STAN PREN 2617-1995 Aerospace Series Plate in Titanium and Titanium Alloys Thickness 6 mm Less Than a Less Than or Equal to 100 mm Dimensions (Edition P 2)《航空航天系列 6<a≤100mm的钛和钛.pdf ASD-STAN PREN 2617-1995 Aerospace Series Plate in Titanium and Titanium Alloys Thickness 6 mm Less Than a Less Than or Equal to 100 mm Dimensions (Edition P 2)《航空航天系列 6<a≤100mm的钛和钛.pdf
  • ASD-STAN PREN 2622-1996 Aerospace Series Circular Tube for Fluids in Heat Resisting Alloys Diameter 3 2 mm Less Than or Equal to D Less Than or Equal to 100 mm Thickness 0 32 mm Le.pdf ASD-STAN PREN 2622-1996 Aerospace Series Circular Tube for Fluids in Heat Resisting Alloys Diameter 3 2 mm Less Than or Equal to D Less Than or Equal to 100 mm Thickness 0 32 mm Le.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1