1、AEROSPACE STANDARDINSULATION SLEEVING, ELECTRICAL, HEAT-SHRINKABLE FLUORINATED ETHYLENEPROPYLENE, NON-CROSSLINKEDAS23053/11Copyright 2016 SAE InternationalAll rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, ele
2、ctronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE.TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4970 (outside USA)Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.orgISSUED2016-
3、10THIRD ANGLE PROJECTIONCUSTODIAN: AE-8/AE-8DFEDERAL SUPPLY CLASS5970AS23053/11SUPERSEDES AMS-DTL-23053/11ASHEET 1 OF 4PROCUREMENT SPECIFICATION: AS23053SAE Technical Standards BoardRules providethat:“This reportis publishedby SAE to advance thestateoftechnical andengineering sciences. The useofthis
4、 reportis entirely voluntary, and its applicability and suitability forany particularuse, includingany patent infringement arising therefrom, is thesole responsibility of theuser.”SAE reviews eachtechnical reportatleastevery fiveyears at whichtime it may berevised, reaffirmed, stabilized, or cancell
5、ed. SAEinvites your written comments and suggestions.SAE values your input. To provide feedback on thisTechnical Report, please visit http:/standards.sae.org/AS23053/11RATIONALETHIS IS A CONVERSION OF AMS-DTL-23053/11 INTO AN AEROSPACE STANDARD WHICH INCLUDES QUALIFICATION AND REQUIREMENTS FOR A QUA
6、LIFIED PRODUCTS LIST.NOTICETHE COMPLETE REQUIREMENTS FOR PROCURING THE PRODUCT DESCRIBED HEREIN SHALL CONSIST OF THIS DOCUMENT AND THE LATEST ISSUE OF AS23053.REQUIREMENTS1. DIMENSIONS AND PROPERTIES IN INCH/POUND UNITS AND THE FAHRENHEIT TEMPERATURES ARE PRIMARY.DIMENSIONS AND PROPERTIES IN SI UNIT
7、S AND THE CELSIUS TEMPERATURES ARE SHOWN AS THE APPROXIMATE EQUIVALENTS OF THE PRIMARY UNITS AND ARE PRESENTED ONLY FOR INFORMATION.2. POLYMER TYPE: THE BASE POLYMER USED IN FORMULATING THIS SLEEVING SHALL BE FLUORINATED ETHYLENE PROPYLENE.3. CONTINUOUS OPERATING TEMPERATURE RANGE: -88 F TO +392 F (
8、67 C TO +200 C).4. COLOR: THE SLEEVING SHALL BE FURNISHED IN CLEAR (WATER WHITE TO TRANSPARENT BLUE), THE AS MANUFACTURED COLOR (SEE 1.3).5. CLASS: THE SLEEVING SHALL BE FURNISHED IN THE FOLLOWING CLASSES, AS SPECIFIED (SEE 7.3A).CLASS 1 - NORMAL SHRINK RATIO, HEAVY WALLCLASS 2 - HIGH SHRINK RATIO,
9、 MEDIUM WALL6. LONGITUDINAL CHANGE: 15%7. PART NUMBER: THE PART NUMBER SHALL BE AS LISTED BELOW:M23053/11 - X XX - XEXAMPLE: CLASS 2 CLEAR, 0.750 INCH (19.1 MM) AS SUPPLIED ID CLEAR SLEEVING SHALL BE IDENTIFIED AS M23053/11-207-C.8. DIMENSIONAL LIFE: THE DIMENSIONAL LIFE OF A PRODUCT APPLIES TO THE
10、EXPANDED I.D.,RECOVERED I.D., AND WALL THICKNESS DIMENSIONS OF THE PRODUCT AS SOLD BY THEMANUFACTURER. DISTRIBUTORS AND REBRAND DISTRIBUTORS. AS23053/11 PRODUCTS CAN BE EXPECTED TO HAVE A MINIMUM DIMENSIONAL LIFE OF 4 YEARS WHEN STORED BETWEEN 32 TO 81 F (0 TO 27 C). PRODUCTS STORED ABOVE THESE COND
11、ITIONS MAY NOT MEET THE MINIMUM EXPANDED I.D. REQUIREMENTS OF THE DETAIL SPECIFICATION. A PRODUCT MAY BE USED BY THE FINAL PURCHASER BEYOND THE EXPECTED MINIMUM DIMENSIONAL LIFE, AS LONG AS THE EXPANDED I.D., RECOVERED I.D.,. AND WALL THICKNESS OF THE PRODUCT MEET THE REQUIREMENTS OF THIS SPECIFICAT
12、ION AT THE TIME OF USE.9. UNRESTRICTED SHRINKAGE: TEST METHOD 5.5: SLEEVING 1 INCH AND BELOW: 410 F 10 F (210 C 6 C). SLEEVING OVER 1 INCH DIAMETER: 430 F 10 F (221 C 6 C).9.COLOR CODE DESIGNATOR (SEE 1.3)SIZE IDENTIFIER (SEE TABLE 1)CLASS (WHERE NO CLASSES ARE SPECIFIED IN THESPECIFICATION SHEET, T
13、HE NUMERIC “0” IS USED)SPECIFICATION SHEETAEROSPACE STANDARD AS23053/11SHEET 2 OF 4INSULATION SLEEVING, ELECTRICAL, HEAT-SHRINKABLE FLUORINATED ETHYLENEPROPYLENE, NON-CROSSLINKEDTABLE 1 - CONSTRUCTION DETAILS, INCHES (MM) 1/PART NUMBER 3/ AS SUPPLIEDID MINIMUM AFTER UNRESTRICTED SHRINKAGEID MAXIMUM
14、WALL THICKNESS 2/CLASS 1M23053/11-101-C .031 (0.8) .027 (0.7) .008 .002 (0.2 0.1)M23053/11-102-C .036 (0.9) .032 (0.8) .008 .002 (0.2 0.1)M23053/11-103-C .045 (1.1) .039 (1.0) .008 .002 (0.2 0.1)M23053/11-104-C .060 (1.5) .049 (1.2) .008 .002 (0.2 0.1)M23053/11-105-C .075 (1.9) .061 (1.5) .009 .002
15、0.2 0.1)M23053/11-106-C .092 (2.3) .072 (1.8) .009 .002 (0.2 0.1)M23053/11-107-C .115 (2.9) .089 (2.3) .009 .002 (0.2 0.1)M23053/11-108-C .141 (3.6) .114 (2.9) .010 .003 (0.3 0.1)M23053/11-109-C .158 (4.0) .124 (3.1) .010 .003 (0.3 0.1)M23053/11-110-C .180 (4.6) .143 (3.6) .010 .003 (0.3 0.1)M23053
16、/11-111-C .197 (5.0) .158 (4.0) .011 .004 (0.3 0.1)M23053/11-112-C .225 (5.7) .180 (4.6) .011 .004 (0.3 0.1)M23053/11-113-C .248 (6.3) .198 (5.0) .011 .004 (0.3 0.1)M23053/11-114-C .290 (7.4) .226 (5.7) .011 .004 (0.3 0.1)M23053/11-115-C .310 (7.9) .249 (6.3) .011 .004 (0.3 0.1)M23053/11-116-C .365
17、9.3) .280 (7.1) .012 .004 (0.3 0.1)M23053/11-117-C .400 (10.2) .311 (7.9) .012 .004 (0.3 0.1)M23053/11-118-C .440 (11.2) .349 (8.9) .012 .004 (0.3 0.1)M23053/11-119-C .500 (12.7) .383 (9.7) .015 .004 (0.4 0.1)M23053/11-120-C .580 (14.7) .448 (11.4) .020 .004 (0.5 0.1)M23053/11-121-C .666 (16.9) .51
18、0 (13.0) .020 .004 (0.5 0.1)M23053/11-122-C .830 (21.1) .637 (16.2) .025 .004 (0.6 0.1)M23053/11-123-C 1.000 (25.4) .764 (19.4) .030 .004 (0.8 0.1)M23053/11-124-C 1.170 (29.7) .891 (22.6) .035 .004 (0.9 0.1)M23053/11-125-C 1.300 (33.0) 1.000 (25.4) .020 .004 (0.5 0.1)M23053/11-126-C 1.330 (33.8) 1.0
19、20 (25.9) .035 .004 (0.9 0.1)M23053/11-127-C 1.700 (43.2) 1.300 (33.0) .020 .004 (0.5 0.1)M23053/11-128-C 2.100 (53.3) 1.700 (43.2) .020 .004 (0.5 0.1)M23053/11-129-C 2.600 (66.0) 2.100 (53.3) .020 .004 (0.5 0.1)M23053/11-130-C 3.100 (78.7) 2.600 (66.0) .020 .004 (0.5 0.1)M23053/11-131-C 3.500 (88.9
20、) 3.100 (78.7) .020 .004 (0.5 0.1)M23053/11-132-C 4.300 (109.2) 3.500 (88.9) .020 .004 (0.5 0.1)M23053/11-133-C 1.500 (38.1) 1.145 (29.1) .035 .004 (0.9 0.1)M23053/11-134-C 1.666 (42.3) 1.270 (32.3) .035 .004 (0.9 0.1)M23053/11-135-C 1.833 (46.6) 1.390 (35.3) .035 .004 (0.9 0.1)M23053/11-136-C 2.000
21、 (50.8) 1.570 (39.9) .035 .004 (0.9 0.1)CLASS 2M23053/11-201-C .093 (2.4) .056 (1.4) .008 .003 (0.2 0.1)M23053/11-202-C .125 (3.2) .075 (1.9) .010 .003 (0.3 0.1)M23053/11-203-C .188 (4.8) .115 (2.9) .010 .003 (0.3 0.1)M23053/11-204-C .250 (6.4) .150 (3.8) .010 .003 (0.3 0.1)M23053/11-205-C .375 (9.5
22、) .225 (5.7) .012 .003 (0.3 0.1)M23053/11-206-C .500 (12.7) .300 (7.6) .015 .004 (0.4 0.1)M23053/11-207-C .750 (19.1) .450 (11.4) .020 .004 (0.5 0.1)M23053/11-208-C 1.000 (25.4) .600 (15.2) .025 .005 (0.6 0.1)M23053/11-209-C 1.500 (38.1) .900 (22.9) .030 .005 (0.8 0.1)M23053/11-210-C 2.000 (50.8) 1.
23、200 (30.5) .030 .005 (0.8 0.1)1/ DIAMETER LIMITS FOR THE OBJECT TO BE ENCLOSED SHALL BE AS RECOMMENDED IN TECHNICAL DATA.2/ WALL THICKNESS VALUES ARE LESS WHEN SHRINKAGE IS RESTRICTED.3/ COLOR IDENTIFIED IS THE STANDARD COLOR (SEE AS23053 1.3).AEROSPACE STANDARD AS23053/11SHEET 3 OF 4INSULATION SLEE
24、VING, ELECTRICAL, HEAT-SHRINKABLE FLUORINATED ETHYLENEPROPYLENE, NON-CROSSLINKEDTABLE 2 - PHYSICAL PROPERTIES 1/CHARACTERISTIC REQUIREMENTTEST PROCEDURE AND CONDITION(SEE AS23053)AS SUPPLIED:ID, MINIMUM TABLE 1 5.3.1RESTRICTED SHRINKAGE NO CRACKS 5.6 410-430 F 4 F (210-221 C 2 C)VOLTAGE WITHSTAND PA
25、SS 5.6.2CCLARITY STABILITY PASS 5.16 410-430 F 4 F (210-221 C 2 C),24 HOURSAFTER UNRESTRICTED SHRINKAGE:ID, MAXIMUM TABLE 1 5.3.2WALL THICKNESS TABLE 1 5.3.3TENSILE STRENGTH PSI (MPA), MINIMUM2000(13.8) 5.13 ASTM D638, CLASS1: 2 INCHES/MINUTECLASS 2: 20 INCHES/MINUTEULTIMATE ELONGATION,PERCENT, MINI
26、MUM200 5.13 ASTM D638, CLASS1: 2 INCHES/MINUTECLASS 2: 20 INCHES/MINUTEDIELECTRIC STRENGTH,VOLTS/MIL (KV/MM), MINIMUM500(19.7) 5.2 ASTM D2671VOLUME RESISTIVITY,OHM-CM, MINIMUM1017 5.2 ASTM D876WATER ABSORPTION,PERCENT, MAXIMUM0.01 5.2 ASTM D570, 24 HOURSAT 73 F (23 C)LOW TEMPERATUREFLEXIBILITYNO CRA
27、CKS 5.7.1 -85 F 2 F (-65 C 1 C)HEAT RESISTANCE,PROPERTIES AFTER:5.9 482 F 5.4 F (250 C 3 C),96 HOURSTENSILE STRENGTH, PSI(MPA) , MINIMUM2000(13.8)ULTIMATE ELONGATION,PERCENT, MINIMUM200DIELECTRIC STRENGTH,VOLTS/MIL (KV/MM),MINIMUM500(19.7) 5.2 ASTM D2671FLAMMABILITY 2/ NON-FLAMMABLE 2/CORROSION 2/ N
28、ON-CORROSIVE 2/FLUID RESISTANCE 2/ NO CHANGE 2/FUNGUS RESISTANCE 2/ NO GROWTH 2/1/ UNLESS OTHERWISE SPECIFIED, THE REQUIREMENTS, TEST PROCEDURES AND CONDITIONS ARE FOR ALL CLASSES.2/ BECAUSE OF THEIR RELATIVE INERTNESS, AS23053/11 SLEEVINGS ARE NOT NORMALLY SUBJECT TO THESE REQUIREMENTS. HOWEVER, TH
29、E ACQUIRING ACTIVITY (SEE 7.3) MAY, AT ITS OPTION, SPECIFY PERFORMANCEOF ANY OR ALL OF THESE REQUIREMENTS.AEROSPACE STANDARD AS23053/11SHEET 4 OF 4INSULATION SLEEVING, ELECTRICAL, HEAT-SHRINKABLE FLUORINATED ETHYLENEPROPYLENE, NON-CROSSLINKEDAPPLICATION NOTES1. INTENDED USE: HEAT SHRINKABLE FLUORINA
30、TED ETHYLENE PROPYLENE SLEEVINGS ARE INTENDED FOR USE IN HIGH TEMPERATURE APPLICATIONS.SPECIFICATION NOTES1. REVISION INDICATOR: A CHANGE BAR (I) LOCATED IN THE LEFT MARGIN IS FOR THE CONVENIENCE OF THE USER INLOCATING AREAS WHERE TECHNICAL REVISIONS, NOT EDITORIAL CHANGES, HAVE BEEN MADE TO THE PREVIOUS ISSUE OF THIS DOCUMENT. AN (R) SYMBOL TO THE LEFT OF THE DOCUMENT TITLE INDICATES A COMPLETE REVISION OF THE DOCUMENT, INCLUDING TECHNICAL REVISIONS. CHANGE BARS AND (R) ARE NOT USED IN ORIGINAL PUBLICATIONS, NOR IN DOCUMENTS THAT CONTAIN EDITORIAL CHANGES ONLY.
