SANS 105-B05-1993 Textiles - Tests for colour fastness Part B05 Detection and assessment of photochromism《织物色牢度试验 第B05部分：光致变色现象的检测和评估》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM C1245 C1245M-2006 Standard Test Method for Determining Bond Strength Between Hardened Roller Compacted Concrete and Other Hardened Cementitious Mixtures (Point Load Test)《测定硬化.pdf

ASTM C1245 C1245M-2011 Standard Test Method for Determining Bond Strength Between Hardened Roller Compacted Concrete and Other Hardened Cementitious Mixtures (Point Load Test)《测定硬化.pdf

ASTM C1245 C1245M-2012 Standard Test Method for Determining Relative Bond Strength Between Hardened Roller Compacted Concrete Lifts (Point Load Test)《测定硬化碾压混凝土和其他硬化粘结混合物间粘合强度的标准试验方.pdf

ASTM C1246-2000(2006) Standard Test Method for Effects of Heat Aging on Weight Loss Cracking and Chalking of Elastomeric Sealants After Cure《弹性体密封剂凝固后热老化对重量损失、裂开和粉化影响的标准试验方法》.pdf

ASTM C1246-2000(2012) Standard Test Method for Effects of Heat Aging on Weight Loss Cracking and Chalking of Elastomeric Sealants After Cure 《弹性体密封剂凝固后热老化对重量损失、裂开和粉化影响的标准试验方法》.pdf

ASTM C1246-2017 Standard Test Method for Effects of Heat Aging on Weight Loss Cracking and Chalking of Elastomeric Sealants After Cure《固后弹性体密封剂热老化影响重量损失 开裂和粉化的标准试验方法》.pdf

ASTM C1247-1998(2004) Standard Test Method for Durability of Sealants Exposed to Continuous Immersion in Liquids《连续浸液的密封剂寿命标准试验方法》.pdf

ASTM C1247-2009 Standard Test Method for Durability of Sealants Exposed to Continuous Immersion in Liquids《连续浸液的密封剂寿命的标准试验方法》.pdf

ASTM C1247-2014 Standard Test Method for Durability of Sealants Exposed to Continuous Immersion in Liquids《连续浸液的密封剂寿命标准试验方法》.pdf