SNI 05-3067-1992 Hexagon head bolts with metric fine pitch thread - Product grade A and B《米制螺纹六角螺帽 产品等级A B》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 16773-2003 Ferroniobium Technical requirements and conditions of delivery《铌铁合金 牌号及技术要求》.pdf

GOST 16775-1993 Plain snap gauges with cemented carbide alloy plates for diameters from 3 to 180 mm Dimensions《直径3mm～10mm镶硬合金的光滑卡规 尺寸》.pdf

GOST 16778-1993 Plain plug gauges with cemented carbide alloy for diameters from 1 to 6 mm Dimensions《直径1mm～6mm镶硬合金的光滑塞规 尺寸》.pdf

GOST 16780-1971 Plain double-ended plug gauges with insert PP of cemented carbide alloy from 6 3 to 50 mm nominal diameter Design and dimensions《直径6 3mm～50mm镶硬合金的双头光滑塞规 结构及尺寸》.pdf

GOST 16799-1979 Petroleum cokes of delayed coking Sampling and preparation of samples《慢焦化的石油焦 取样和试样制备》.pdf

GOST 16800-1971 Flores sambuci nigrae elder flowers《接骨木花》.pdf

GOST 16803-1978 Discharge pulsed sources of high-intensity optical radiation Terms and definitions《脉冲气体放电高强度光辐射源 术语和定义》.pdf

GOST 16806-1971 Carbide tipped blades with screw clamping for combined shell reamers Design and dimensions《组合式筒形铰刀用带螺旋夹具的硬质合金刀头 设计和尺寸规格》.pdf

GOST 16815-1971 Test table 0159K-12 for facsimile devices《传真机用的015K－12型检验用表》.pdf